FLASH SALE!   🛍️   Get a stonking 40% off Inventor 2040 W – an all-in-one board for making contraptions that can move, sense things, make noise, and talk to the internet!!

Raspberry Pi Build HAT Power Supply – UK

by Raspberry Pi

Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO® Technic™ motors, as well as your Raspberry Pi computer.

Compatible with LEGO Technic motors and sensors included in the LEGO® Education SPIKE™ Portfolio, the Build HAT combines the power of Raspberry Pi computing with easy building opportunities to help you make creative and robust projects.

Specification

Output
Output voltage: +8.0V DC
Minimum load current: 0.01A
Nominal load current: 6.0A
Maximum power: 48.0W
Load regulation: ±5%
Line regulation: ±5%
Ripple & noise: 200mVp-p
Rise time: 100ms maximum to regulation limits for DC outputs
Turn-on delay: 3000ms maximum at nominal input AC voltage and full load
Protection: Short circuit protection
Overcurrent protection
Overvoltage protection
Efficiency: 87.77% minimum (output current from 100%, 75%, 50%, 25%)
Output cable: 1.5m 16AWG
Output connector: Barrel connector
5.5mm × 2.1mm × 11mm
Centre positive
Input
Voltage range: 100-240Vac (rated)
96-264Vac (operating)
Frequency: 50/60Hz ±3Hz
Current: 1.2A maximum
Power consumption (no load): 0.1W maximum
Inrush current: No damage shall occur and the input fuse shall not blow