Flexible LED Strip Adaptor - 3-pin

Connect LED strips together without soldering with these handy adaptors!

The clips on the end of these connectors make fastening together sections of LED strip a breeze, great for if you're prototyping or looking for a quick, neat job.

Compatible with our 3 wire Flexible RGB or RGBW NeoPixel/WS2812/SK6812 compatible LED strips - 30 or 60 pixels per metre. They won't work with the 144 pixels per metre variants, they're too wide to fit into the connector.

Please note that the cross shaped adaptors are two right angle connectors and the two sets of traces aren't joined, so you'll need to take this into account if wiring up LEDs in a grid.

2 customer reviews

3 years ago
Neat looking, but very hard to recommend if you're not comfortable with soldering, which is supposedly the target audience for this product. The contact between the right-angle strip and the legs of the connectors is very poor, to the point where some of mine report no continuity at all when tested with a multimeter, especially on the centre pin, which receives less pressure from the plastic tab. The positive and negative pins are slightly better, but still present higher-than-ideal resistance, which is not encouraging when you intend to run multiple amps through it to feed longer LED strips. I'll have to resort to soldering the legs of the connectors to the stirps on both sides to ensure there is good contact, making this a permanent solution rather than something modular, which is what I was hoping for when I bought these.
by Anderson about Flexible LED Strip Adaptor - 3-pin via REVIEWS.io

1 user photo