64MP Autofocus Camera for Raspberry Pi

by Arducam

A 64-megapixel ultra high-resolution autofocus camera module exclusively built for the latest and future generations of Raspberry Pis.

By bringing a sensor inside modern-day flagship phones to Raspberry Pi. you can take DSLR-like still images at the maximum resolution of 9152 x 6944. And with an autofocus lens, the ePTZ, and the upcoming continuous-autofocus features.

You now get more horsepower to build more applications, to cover more industries, to unlock more fields, at a much lower cost.

For seasoned makers, Pi Hawk-eye is designed to ensure you a smooth upgrade, it is compatible with everything you already have: the v1/v2 form-factor, the MIPI CSl-2 connection, the latest libcamera software, the standard tripod mount. etc.

Even if you are using Raspberry Pi for the first time, you can follow the hands-on guide without hassle.

SPECIFICATION

Optical Size Type 1/1.7"
9.25mm diagonal (7.4x5.55mm)
Focus Type Maunal/Auto
Sensor Resolution 9152 x 6944
Video Mode
(on Raspberry Pi)
1080p30
720p60
640x480p60/90
Video Mode
(Camera Module)
1280x720 @ 120fps
1920x1080 @ 60fps
2312x1736 @ 30fps
3840x2160 @ 20fps
4624x3472 @ 10fps
9152x6944 @ 2.7fps
Colour Filter Quad Bayer Coding (QBC)
Supported Platforms
(Full Resolution - 64MP)
Pi 4B/CM4
Supported Platforms
(SuperPixel Resolution - 16MP)
Pi 2/3/CM3/Zero W*/Zero 2W*
Raspberry Pi OS Bullseye (32-bit/64-bit)
01/28/22 or later releases
ocus 8cm~INF
Focal ratio (F-Stop) F1.8
Focal length 5.1mm
View Angle 84 Degrees (Diagonal)
Dimensions 25mm x 24mm
Shutter Type Rolling
Output Format JPEG/YUV/RGB/RAW10

*To use the camera on Pi Zero and 2 W, you need this.

DOCUMENTATION

NOTE: The arducam 64MP cameras can only get maximum resolution and video streaming on Pi4 and CM4 platforms. The resolution and video streaming of the camera will be limited on other Raspberry Pi platforms

PACKING LIST

  • 1 x 64MP-AF Camera Board
  • 1 x 15cm FPC Cable

6 customer reviews

2 years ago
Works really well. Have to say that I might get some 1mm as the 0.5mm is quite thin for my needs (mainly wiring between a uC PCB and I2C devices with single core wire). I guess the 0.5mm would be more appropriate for soldering surface mount items.
by Jonathan about Fairlötet solder - 100g via REVIEWS.io
3 years ago
This solder is good if your joint location is not a large copper plane, in that case make sure to heat the surface adequately before applying the solder and you'll be fine.
by Sagar about Fairlötet solder - 100g via REVIEWS.io
4 years ago
I tried the 0.5mm but prefer this 1mm. What I do need is a new iron more suitable for lead free solder.... Another good product from Pimoroni.
by Mark about Fairlötet solder - 100g via REVIEWS.io
4 years ago
Takes a bit of getting used to if you're used to lead solder. Dispatched in good time and worked well to solder a GPIO header on to a Raspberry Pi Zero.
by Kit about Fairlötet solder - 100g via REVIEWS.io
7 years ago
I hope other people will become aware of fair supply chains that can be developed within the ICT and electronics industries. Use of this product will be a small step towards a fairer supply chain.
by Dawn about Fairlötet solder - 100g via REVIEWS.io

User photos