M5Stack PoE Camera with Wi-Fi (OV2640)

by M5Stack

PoECAM-W is an open source fully programmable camera integrating PoE (Power Over Ethernet) and Wi-Fi.

This is an ESP32 based webcam with W5500 embedded Ethernet controller, plus 2M pixel image sensor OV2640. PoECAM-W is equipped with a combination of 8MB PSRAM + 16MB Flash large memory. This teeny tiny with flexible power supply, you can get stable image by connecting the network cable in just 2 steps. It's wonderful for you to monitor warehouse, auto image acquisition, etc.

Features

  • Built-in ESP32 MCU(support WIFI)
  • 2 million pixel camera 0V2640
  • Ethernet chip W5500
  • LAN speeds up to 10M or 100M (depending on the line provided)
  • PoE IEEE802.3 AF specification(Maximum power 6W)
  • Built-in prompt LED light
  • Development platform:Arduino、ESP-IDF
  • Ethernet standard interface RJ45
  • Standard LEGO interface and camera mount

Includes

  • 1 x PoECAM-W
  • 1 x Camera mount clip
  • 1x Brick compatible clip

Applications

  • Warehouse monitoring
  • Timed photograph
  • Machine vision
  • Smart home monitoring

Specification

Resources Parameters
MCU ESP32-D0WDQ6-V3
Camera Module OV2640
Ethernet Chip W5500
FLASH 16MB
PSRAM 8MB
Pixel Size 2.2 µm x 2.2 µm
Automatic image control functions Automatic Exposure Control (AEC), Automatic Gain Control (AGC), Automatic White Balance (AWB), Automatic Band Filter (ABF), and Automatic Black-Level Calibration (ABLC)
Supports Hardwired TCP/IP Protocols TCP, UDP, ICMP, IPv4, ARP, IGMP, PPPoE
DFOV 65°
Output Formats(8-bit) • YUV(422/420)/YCbCr422 • RGB565/555 • 8-bit compressed data • 8-/10-bit Raw RGB data
Ethernet interface specifications RJ45
MAXIMUM POWER 6W
Product Size 64mm × 24mm × 18mm
Package Size 80mm × 37mm × 32mm
Product Weight 38g
Package Weight 45g

Documentation

6 customer reviews

2 years ago
Works really well. Have to say that I might get some 1mm as the 0.5mm is quite thin for my needs (mainly wiring between a uC PCB and I2C devices with single core wire). I guess the 0.5mm would be more appropriate for soldering surface mount items.
by Jonathan about Fairlötet solder - 100g via REVIEWS.io
3 years ago
This solder is good if your joint location is not a large copper plane, in that case make sure to heat the surface adequately before applying the solder and you'll be fine.
by Sagar about Fairlötet solder - 100g via REVIEWS.io
4 years ago
I tried the 0.5mm but prefer this 1mm. What I do need is a new iron more suitable for lead free solder.... Another good product from Pimoroni.
by Mark about Fairlötet solder - 100g via REVIEWS.io
4 years ago
Takes a bit of getting used to if you're used to lead solder. Dispatched in good time and worked well to solder a GPIO header on to a Raspberry Pi Zero.
by Kit about Fairlötet solder - 100g via REVIEWS.io
7 years ago
I hope other people will become aware of fair supply chains that can be developed within the ICT and electronics industries. Use of this product will be a small step towards a fairer supply chain.
by Dawn about Fairlötet solder - 100g via REVIEWS.io

User photos