Brushed DC Motor: 130-Size, 6V, 11.5kRPM, 800mA Stall

by Pololu

This 130-size brushed DC motor has a recommended operation voltage of 3 – 12 V. Approximate specifications at 6 V: free-run speed of 11,500 RPM, free-run current of 70 mA, and stall current of 800 mA.

This 130-size DC motor has a recommended operating voltage of 3 – 12 V; at 6 V, the no-load speed is about 11,500 RPM, the no-load current is approximately 70 mA, and the stall current is around 800 mA. For an estimate of the torque, note that the Pololu 228:1 plastic gearmotor produces roughly 100 oz-in of torque at 6 V using this motor, and the Pololu 120:1 plastic gearmotors produce roughly 75 oz-in of torque at 6 V. The output shaft has a diameter of 2 mm.

This motor works well with many of our lower-power motor controllers, such as the qik 2s9v1 dual serial motor controller, Baby Orangutan robot controller, and TB6612FNG dual motor driver carrier.

Specifications

  • Size: 25 × 15 × 20 mm
  • Weight: 18 g
  • Shaft diameter: 2 mm
  • Shaft length: 8 mm
  • No-load speed @ 6V: 11500 rpm
  • No-load current @ 6V: 70 mA
  • Stall current @ 6V: 800 mA

Why not try it with Yukon?

Looking for a controller for your project? Yukon is a high-power modular robotics and engineering platform, built around RP2040 and designed to drive the most ambitious robots, props and devices.

Yukon is a standalone controller that can be equipped with up to six interchangeable modules capable of driving high-powered hardware - this is made possible by the unique pin capabilities of Raspberry Pi's multitalented RP2040 chip. This flexibility means you can drive many unique combinations of motors, servos, steppers, speakers, LED strips and more, all from a single Yukon host!