Raspberry Pi & Maker goodies
Curated range of best of breed products.
This is the LilyPad Rainbow LED strip, with seven LilyPad LEDs that are still attached to one another, letting you snap LEDs apart at your leisure to sew into clothing or whatever else you can dream up.
The MyoWare LED Shield is designed to pair with the MyoWare Muscle Sensor. The blue 10-segment bar graph shows the magnitude of the measured signal. The more muscle activation measured, the higher up the board the lit LEDs will go.
This is the FemtoBuck, a small-size single-output constant current LED driver. Each FemtoBuck has the capability to dim a single high-power channel of LEDs from 0-350mA at up to 36V while the dimming control can be either accessed via PWM or analog signal from 0-2.5V.
This simple breakout board makes it easy to use our LED tactile switches in a breadboard, or your next project.
We know you love adding color to your e-textiles, adding the LilyPad Pixel Board to your project will only make it better. The pixel board is equipped with a WS2812B which is actually an RGB LED with a WS2811 built right into the LED!
The PicoBuck LED Driver is an economical and easy to use driver that will allow you to control and blend three different LEDs on three different channels.
This is the medium sized LED Matrix with a backpack that has been designed to take SPI serial input and display any graphics you pass it.
This is a large sized RGB LED Matrix with a backpack that has been designed to take SPI serial input and display any graphics you pass it.