Temperature Sensor - TMP36

The TMP36 is a low voltage, precision centigrade temperature sensor.

It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn’t require any external calibration to provide typical accuracies of ±1°C at +25°C and ±2°C over the −40°C to +125°C temperature range. We like it because it’s so easy to use: Just give the device a ground and 2.7 to 5.5 VDC and read the voltage on the Vout pin. The output voltage can be converted to temperature easily using the scale factor of 10 mV/°C.

Features:

  • Voltage Input: 2.7 V to 5.5 VDC
  • 10 mV/°C scale factor
  • ±2°C accuracy over temperature
  • ±0.5°C linearity
  • Operating Range: −40°C to +125°C

Documents:

6 customer reviews

2 years ago
Works really well. Have to say that I might get some 1mm as the 0.5mm is quite thin for my needs (mainly wiring between a uC PCB and I2C devices with single core wire). I guess the 0.5mm would be more appropriate for soldering surface mount items.
by Jonathan about Fairlötet solder - 100g via REVIEWS.io
3 years ago
This solder is good if your joint location is not a large copper plane, in that case make sure to heat the surface adequately before applying the solder and you'll be fine.
by Sagar about Fairlötet solder - 100g via REVIEWS.io
4 years ago
I tried the 0.5mm but prefer this 1mm. What I do need is a new iron more suitable for lead free solder.... Another good product from Pimoroni.
by Mark about Fairlötet solder - 100g via REVIEWS.io
4 years ago
Takes a bit of getting used to if you're used to lead solder. Dispatched in good time and worked well to solder a GPIO header on to a Raspberry Pi Zero.
by Kit about Fairlötet solder - 100g via REVIEWS.io
7 years ago
I hope other people will become aware of fair supply chains that can be developed within the ICT and electronics industries. Use of this product will be a small step towards a fairer supply chain.
by Dawn about Fairlötet solder - 100g via REVIEWS.io

User photos