BIG ASK! If you ❤️ shopping with us then please review us on Trust Pilot today!
If you ❤️ shopping with us please review us on Trust Pilot!

Single-phase DIN rail mounted kWh meter

by Velleman

This single-phase DIN rail kWh meter is a new generation of single-phase electronic watt-hour meters, adopting micro-electronic techniques, LSI circuits and advanced digital and SMT techniques.

The meter is in conformity with the relevant technical requirements of Class 1, Class 2 and IEC62052-11, IEC62053-21.

It accurately and directly measures 50/60 Hz active energy consumption from single-phase AC electricity grids.

The current specification is an important parameter for energy meters as it signifies a meter's ability to accurately measure the power consumed by a user's electrical load. There are generally two parts to this specification: the basic current (Ib) for direct-connected meters and the maximum current I max. Of these current ratings, you will typically see the current specification defined in terms of Ib with the I max value shown in parentheses. For example, some common values for the energy meter current specification include 5 (40) A, 5 (80) A or 10 (100) A.

Features

  • LCD display (with blue backlight)
  • pulsed output
  • LED indicator

Specifications

  • voltage: 230 V
  • current: 5 (40) A
  • accuracy class: 1.0
  • frequency: 50 / 60 Hz
  • display mode: LCD 5+2 digits = 99999.99 kWh
  • power consumption: <= 0.4 W (8 VA)
  • temperature range: -20 to 65 °C
  • LED indicator: 1 blink per pulse
  • with PNP transistor
  • pulsed output: 1000 imp/kWh
    • voltage: 12 to 27 V
    • current: 27 mA
    • impulse width: 90 ms
  • notes:
    • A qualified technician should install and service this device.
    • The measurements provided by this device are for information purposes only.
  • cable cross-sectional area: min. 2mm², max. 16 mm²
  • Torque: max.110 Nm
  • dimensions (LxWxH): 80 x 18 x 60 mm
  • not resettable
  • width: 1 DIN module

Documents