🎉  Happy 13th Birthday Raspberry Pi!   🎂   1,000+ deals in store!   🥳
🎉  Happy 13th Birthday Raspberry Pi!   🎂   1,000+ deals in store!   🥳

Official Raspberry Pi Universal Power Supply (Pi 3 & Zero Only)

by Raspberry Pi

This power supply will not work with the Raspberry Pi 4!

If you need a power supply for the Pi 4, please consider this one or this one.

The official Raspberry Pi power supply (PSU) is shipped with easily interchangeable heads for the UK, US, EU and Australia meaning you can now use your Pi in all four corners of the world!

Many problems people have working with the Raspberry Pi ultimately come down to using a low quality or under-powered supply. Cheap power supplies are notorious for lying about their specifications and often suffer substantial voltage drop well below their published specification.

  • High-quality power supply
  • 1.5m cable length
  • microB USB connection
  • Includes 4 worldwide adaptor plates: Australia/China, Europe, UK, US/Japan
  • Cable strain relief
  • 100-240v input, 5.1v 2.5A output

85 customer reviews

a year ago
Good quality, does exactly what it's advertised to do. I only bought the header, not the kit, but you can still use a hammer to gently prise this in place.
by ian about GPIO Hammer Header (Solderless) via REVIEWS.io
a year ago
Easy for the header to lean to one side or the other (and easy to not spot this when installing) - could do with a note in the instructions about this as well as more comprehensive instructions generally. That said, it did work in the end and is a welcome solution for those without a soldering iron!
by Edwin about GPIO Hammer Header (Solderless) via REVIEWS.io
2 years ago
Does what it says! An easy way to add a header to a Raspberry Pi Zero without soldering. Just tap it in to place along the length of the header pins.
by Sean about GPIO Hammer Header (Solderless) via REVIEWS.io
2 years ago
Excellent piece of kit if you are unable to solder like me. I have Parkinson's so i can't solder so this Hammer Header is just the job.
by Tony about GPIO Hammer Header (Solderless) via REVIEWS.io
2 years ago
Excellent piece of kit if you are unable to solder like me. I have Parkinson's so i can't solder so this Hammer Header is just the job.
by Tony about GPIO Hammer Header (Solderless) via REVIEWS.io
2 years ago
Great product which fits perfectly into the pi without the need to solder. Item was also promptly and securely delivered. Highly recommended
by Anonymous about GPIO Hammer Header (Solderless) via REVIEWS.io
2 years ago
I wasn’t initially sure this was going to work 100% making good clean contacts. I watched the YouTube guide and followed suite. Well how easy it was. Worked perfectly. Slow and general and even taps across the header is the key. I’m rubbish at soldering so this was a revaluation. Very clever and simple and I think unique to Pimoroni. Well done and highly recommended.
by Mark about GPIO Hammer Header (Solderless) via REVIEWS.io
2 years ago
Works well and well suited to the task. Would say that it's important to check continuity of the pins once pressed as I had a couple pins pushed too far through the first time.
by Andrew about GPIO Hammer Header (Solderless) via REVIEWS.io
2 years ago
I ordered a Keybow and remembered that my 1st gen Pi Zero didn’t have the GPIO pins. Since I can’t solder for toffee this was a very useful solution. Perfectly designed, a couple of taps on the jig with my pin hammer securely fixed the male header in place.
by Adrian about GPIO Hammer Header (Solderless) via REVIEWS.io
3 years ago
This hammer header works wonderfully, hold everything in position, smack it, done. Can recommend. If you're not very handy you should probably order the installation jig but it can be done without.
by Anonymous about GPIO Hammer Header (Solderless) via REVIEWS.io
3 years ago
Everything was in order, although one could imagine a small note of instructions or tips included. How far the pins need to be run through and that sort of thing. Of course, all such information is fairly easily obtained on the internet. It was a lot easier than soldering, I can tell you that much.
by John about GPIO Hammer Header (Solderless) via REVIEWS.io
3 years ago
Expected this to be a bit of a chore, but doing this in a vice was actually super easy and only took a few seconds. Would highly recommend a vice to do this but it stills works great, i intend to buy more to skip the chore of soldering
by Anonymous about GPIO Hammer Header (Solderless) via REVIEWS.io
3 years ago
Great little item, exactly as ordered and easily hammered into the pi zero as advertised. I now have my inkyPHAT running on my pi zero :)
by James about GPIO Hammer Header (Solderless) via REVIEWS.io
3 years ago
Great, easy and simple way to add a GPIO header to your new RPI Zero 2W. Be sure to follow the directions and keep an eye on how even the header is as you install it.
by Anonymous about GPIO Hammer Header (Solderless) via REVIEWS.io
3 years ago
I can only evaluate the delivery which was extremely fast, I have not yet installed the straps but they seem to be of impeccable quality.
by Mihai about GPIO Hammer Header (Solderless) via REVIEWS.io
3 years ago
Works fine. Exactly as I would expect from this company. a very simple but effective way to secure the pins to a Zero Pimoroni always helpful and efficient
by Ian about GPIO Hammer Header (Solderless) via REVIEWS.io
4 years ago
Much easier than soldering. You definitely need the jig to hold everything in position so it can be whacked into place with a hammer. I was over enthusiastic with one and pushed the pins all the way through, so take it steady!
by Anonymous about GPIO Hammer Header (Solderless) via REVIEWS.io
4 years ago
Very high quality component. Great satisfaction with the speed of delivery. I never found them selling it here. I will be happy to return and shop again.
by Lukas about GPIO Hammer Header (Solderless) via REVIEWS.io
4 years ago
Good price and simpler than soldering. Very simple to install and works as expected. Would definitely recommend company to anyone looking for the products they sell.
by Paul about GPIO Hammer Header (Solderless) via REVIEWS.io
4 years ago
If you're not afraid to get the hammer out and start smacking your newly purchased board it will save you soldering 40 pins.... Nice.
by Jonathan about GPIO Hammer Header (Solderless) via REVIEWS.io

User photos