A 6 port USB 2.0 hub with per-port power switching, live power monitoring, scheduling and a REST API, controlled over Wi-Fi by an ESP32-S3.
Built for developers, test benches and USB devices that need to run unattended. Smart USB Hub brings repeatable testing and everyday device routines to your workbench, without the constant plugging, unplugging and reaching for cables.
Power supply not included. The downstream ports need a separate 5V USB-C supply, rated 3A or more, plugged into the 5V port power input.

Power cycling, scripted.
Use the REST API to switch a device’s power, read its voltage, current and power consumption, and check port status from your test scripts. Repeat a startup test or compare readings across operating states while the other devices stay powered.
Every port, scheduled.
Set a different schedule for each port: selected weekdays, a fixed run time, a chosen stop time or repeating intervals. Rules run on the hub, so your browser doesn’t need to stay open.
Step in any time.
Open the web interface over Wi-Fi to switch an individual port or investigate a device. Live readings show what it’s drawing; connection and fault status help you see why it isn’t behaving as expected.

Live readings for every port, plus a rolling one-hour capture of voltage, current and power, sampled at 100 Hz on each port.

Schedules for each port: daily or weekly routines, right down to repeating every 5 minutes, with a timeline of when it’s powered.
Features & Specifications
| Downstream | 6 × USB-C · USB 2.0 High Speed (480 Mbps) on every port |
|---|---|
| Upstream | 1 × USB-C · USB 2.0 High Speed (480 Mbps) |
| Hub chip | Multi-TT: transaction translator on every port, so FS and LS devices don’t share bandwidth |
| Controller | ESP32-S3-WROOM-1 · 16MB flash · 8MB OPI PSRAM · Wi-Fi |
| Port power | 5V USB-C input · 3A+ supply |
| 3V3 power | 2 × 3.3V LDOs · headroom for the ESP32-S3, hub chip, peripherals and LEDs |
| Protection | Per-port current limiting and over-current fault detection |
| Per-port current limit | 680mA |
| Measurement resolution | Voltage 8mV · current 0.4mA · power approx. 2mW at 5V |
| Indicators | Per-port RGB status · power, device presence and faults |
| Environment | Onboard temperature and humidity sensor |
| Buttons | IO48 user button · IO0 / Boot · Reset |
Optional case
Choose the version with a case and your hub goes from bare board to finished desk tool. Here’s what you get:
- Matt Black ABS: a 3D printed enclosure that looks right at home on any bench
- Laser cut light pipes: every port’s RGB status still shines through
- Heat inserts and screws: proper threads, so it goes together solid
- Rubber feet: it stays put when you plug and unplug
- Case size: 90 × 64 × 19 mm
Or you can print your own, the STEP files are on GitHub.
It’s open source!
Smart USB Hub is fully open source, so you can see exactly how it works, tweak it to suit your bench, or build your own. The Unexpected Maker GitHub repository includes:
- KiCAD 10 hardware design files
- Firmware as a PlatformIO project
- Case STEP files, ready to print or remix
- Documentation
