NeoPixel Ring - 16 x 5050 RGBW LEDs w/ Integrated Driversby Adafruit
What is better than smart RGB LEDs? Smart RGBW LEDs! These NeoPixel rings have 4 LEDs (red, green, blue and white) for swish lighting effects.
This is the 16 LED RGBW NeoPixel Ring. We have a ton of other NeoPixel rings in the store to check out!
16 ultra bright smart LED NeoPixels are arranged in a circle with 1.75" (44.5mm) outer diameter. The rings are 'chainable' - connect the output pin of one to the input pin of another. Use only one microcontroller pin to control as many as you can chain together! Each LED is addressable as the driver chip is inside the LED. Each one has ~18mA constant current drive so the color will be very consistent even if the voltage varies, and no external choke resistors are required making the design slim. Power the whole thing with 5VDC and you're ready to rock.
The NeoPixel is 'split', one half is the RGB you know and love, the other half is a white LED with a yellow phosphor. Unlit, it resembles an egg yolk. Lit up these are insanely bright (like ow my eye hurts) and can be controlled with 8-bit PWM per channel (8 x 4 channels = 32-bit color overall). Great for adding lots of colorful + white dots to your project!
NeoPixel LEDs use 800 KHz protocol so specific timing is required. On NeoPixels, the PWM rate is ~400 Hz, which works well but is noticable if the LED is moving.
NeoPixels are 5050-sized LEDs with an embedded microcontroller inside the LED. You can set the brightness and color of each R/G/B/W with 8-bit PWM precision (so 32-bit color per pixel). The LEDs are controlled by shift-registers and only 1 digital output pin are required to send data down. The PWM is built into each LED-chip so once you set the color you can stop talking to the ring and it will continue to PWM all the LEDs for you.
Adafruit have a tutorial showing wiring, power usage calculations, example code for usage, etc. for NeoPixel Please check it out! Please note you will need a NeoPixel library with RGBW support which is not always available. If you try to control these with a plain 'RGB' NeoPixel library, you'll get very weird results. The Adafruit NeoPixel library does support RGBW but if you're using something else, just be aware that it might require some hacking.
Adafruits detailed NeoPixel Uberguide has everything you need to use NeoPixels in any shape and size. Including ready-to-go library & example code for the Arduino UNO/Duemilanove/Diecimila, Flora/Micro/Leonardo, Trinket/Gemma, Arduino Due & Arduino Mega/ADK (all versions)
Comes as a single ring with 16 individually addressable RGBW LEDs assembled and tested.TECHNICAL DETAILS
- WS2812 Datasheet
- SK6812 Datasheet
- Outer diameter: 44.5mm / 1.75"
- Inner diameter: 31.75mm / 1.25"
- Thickness: 3.25mm / 0.13"
- Weight: 4.2g
- May ship with either WS2812B or SK6812-based LEDs. They are the same brightness, color and protocol
Warm White - ~3000K
Natural White - ~4500K
Cool White - ~6000K
- Satisfaction or refund guarantee
- Worldwide shipping via mail or courier