Adafruit ESP32-S2 Feather with BME280 Sensor - (4MB Flash/2MB PSRAM)

by Adafruit

What's Feather-shaped and has an ESP32-S2 WiFi module? What has a STEMMA QT connector for I2C devices and a built in ambient sensor? What has your favorite Espressif WiFi microcontroller and lots of Flash and RAM memory for your next IoT project? What will make your next IoT project sensor project flyyyyy?

That's right - it's the new Adafruit ESP32-S2 Feather with BME280 temperature/humidity/pressure sensor built right in! With native USB and 4 MB flash + 2 MB of PSRAM, this board is perfect for use with CircuitPython or Arduino with low-cost WiFi. Native USB means it can act like a keyboard or a disk drive. WiFi means its awesome for IoT projects. And Feather means it works with the large community of Feather Wings for expandability.

The ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has built-in native USB as well as some other interesting new technologies like Time of Flight distance measurements. With its state-of-the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the Internet of Things (IoT), wearable electronics, and smart homes.

Please note the Feather ESP32-S2 has a single-core 240 MHz chip, so it won't be as fast as ESP32's with dual-core. Also, there is no Bluetooth support. However, we are super excited about the ESP32-S2's native USB which unlocks a lot of capabilities for advanced interfacing! This ESP32-S2 mini-module we are using on the Feather comes with 4 MB flash and 2 MB PSRAM so you can buffer massive JSON files for parsing!

Features:

  • ESP32-S2 240MHz Tensilica processor - the next generation of ESP32, now with native USB so it can act like a keyboard/mouse, MIDI device, disk drive, etc!
  • Mini module has FCC/CE certification and comes with 4 MByte of Flash and 2 MByte of PSRAM - you can have huge data buffers
  • Power options - USB type C or Lipoly battery
  • Built-in battery charging when powered over USB-C
  • BME280 temperature / humidity / barometric pressures sensor connected over I2C on address 0x77 for immediate ambient weather sensing.
  • LiPoly battery monitor - LC709203 chip actively monitors your battery for voltage and state of charge / percentage reporting over I2C
  • Reset and DFU (BOOT0) buttons to get into the ROM bootloader (which is a USB serial port so you don't need a separate cable!)
  • Serial debug output pin (optional, for checking the hardware serial debug console)
  • STEMMA QT connector for I2C devices, with switchable power, so you can go into low power mode.
  • On/Charge/User LEDs + status NeoPixel with pin-controlled power for low power usage
  • Low Power friendly! In deep sleep mode we can get down to 30uA of current draw from the Lipoly connection. Quiescent current is from the power regulator, ESP32-S2 chip, and Lipoly monitor. Turn off the NeoPixel and external I2C power for the lowest quiescent current draw.
  • Works with Arduino or CircuitPython

Technical Details

Product Dimensions: 52.4mm x 22.9mm x 7.2mm / 2.1" x 0.9" x 0.3"

Product Weight: 6.3g / 0.2oz

6 customer reviews

2 years ago
Works really well. Have to say that I might get some 1mm as the 0.5mm is quite thin for my needs (mainly wiring between a uC PCB and I2C devices with single core wire). I guess the 0.5mm would be more appropriate for soldering surface mount items.
by Jonathan about Fairlötet solder - 100g via REVIEWS.io
3 years ago
This solder is good if your joint location is not a large copper plane, in that case make sure to heat the surface adequately before applying the solder and you'll be fine.
by Sagar about Fairlötet solder - 100g via REVIEWS.io
4 years ago
I tried the 0.5mm but prefer this 1mm. What I do need is a new iron more suitable for lead free solder.... Another good product from Pimoroni.
by Mark about Fairlötet solder - 100g via REVIEWS.io
4 years ago
Takes a bit of getting used to if you're used to lead solder. Dispatched in good time and worked well to solder a GPIO header on to a Raspberry Pi Zero.
by Kit about Fairlötet solder - 100g via REVIEWS.io
7 years ago
I hope other people will become aware of fair supply chains that can be developed within the ICT and electronics industries. Use of this product will be a small step towards a fairer supply chain.
by Dawn about Fairlötet solder - 100g via REVIEWS.io

User photos