Industrial
38 products- 16Special Offers
- 13Last Chance
- 5Pimoroni Originals
Filter
- 38Industrial
- 15Raspberry Pi
- 11Compute Module
- 9Single Board Computer
- 7CM4
- 6CM5
- 6Power
- 5Development Boards
- 4Components
- 4Internet of Things
- 4Networking
- 3Connectors
- 2HATs & Addons
- 2Pico
- 2Pico W Aboard
- 2Qw/ST
- 1Antennas
- 1Bluetooth
- 1Breakout Garden
- 1Breakouts
- 1Cameras
- 1Measurement & Test
- 1Prototyping
- 1Wireless
Brand
- 13Kunbus GmbH
- 12Raspberry Pi
- 5Pimoroni
- 4M5Stack
- 3Velleman
- 1Other
Type
- 11Revolution Pi
- 9Raspberry Pi
- 5Raspberry Pi Addon
- 3Power
- 2Component
- 2Development board
- 2Pico Addon
- 1Accessory
- 1Breakout
- 1Camera
- 1Microcontroller

In stock
Raspberry Pi Compute Module 5 – WiFi / 8GB RAM / No eMMC:
Raspberry Pi Compute Module 5 is a system on module that delivers the power of Raspberry Pi 5 in a form factor ideal for embedded applications.
£75.90

In stock
Raspberry Pi Compute Module 5 Dev Kit:
A complete development kit for CM5, providing all products required to allow an engineer to start a design “out of the box”.
£124.40

In stock
Raspberry Pi Compute Module 5 IO Board:
The Raspberry Pi Compute Module 5 IO Board breaks out every interface from a Compute Module 5. It provides a development platform and reference baseboard, reducing the time to market for Compute Module 5 based designs.
£19.20

In stock
Raspberry Pi Compute Module 4 and 5 Antenna Kit:
Certified for use with Raspberry Pi Compute Module 4 and 5
£4.75

Out of stock
Raspberry Pi Compute Module 5 – WiFi / 8GB RAM / 32GB eMMC:
Raspberry Pi Compute Module 5 is a system on module that delivers the power of Raspberry Pi 5 in a form factor ideal for embedded applications.
£85.40

In stock
Raspberry Pi Compute Module 5 – WiFi / 4GB RAM / 32GB eMMC:
Raspberry Pi Compute Module 5 is a system on module that delivers the power of Raspberry Pi 5 in a form factor ideal for embedded applications.
£66.40

In stock
Raspberry Pi Compute Module 4 – Wireless / 4GB RAM / 16GB Flash:
The power of Raspberry Pi 4 in a compact form factor for deeply embedded applications.
£55.80

In stock
Automation HAT:
Take control of and monitor your world with our ultimate jack-of-all-trades Raspberry Pi HAT!
£30

In stock
Automation 2040 W (Pico W Aboard):
An all-in-one, Pico W powered industrial/automation controller with 2.4GHz wireless connectivity, relays and a plethora of inputs and outputs. Compatible with 6V to 40V systems.
£29.26

In stock
Automation HAT Mini:
Automate your world with Automation HAT Mini! Monitor and control up to 24V systems and see their status on the gorgeous full-colour display.
£22.50

In stock
Automation 2040 W Mini (Pico W Aboard):
A slimline industrial/automation controller with 2.4GHz wireless, powered by Raspberry Pi Pico W. Compatible with 6V to 40V systems.
£19.50

Out of stock
DIN Rail Mounts (Automation 2040 W):
These mounts clip securely onto a DIN rail and can be used to mount PCBs or other devices inside a switch cabinet or electrical enclosure.
£3

In stock
M5Stack Station ESP32 IoT Development Kit (RS485 Version):
M5Station-485 is a multi-purpose industrial level programmable embedded controller with Espressif ESP32 SOC, integrated Wi-Fi and 'BT' solution, dual core low-power Xtensa® 32-bit LX6 microprocessor, main frequency up to 240MHz.
£51.90

In stock
HT0740 40V / 10A Switch Breakout:
Oh boy, this is a Big. Damn. Switch. Program it to switch loads up to 40V / 10A connected to the HT0740 breakout's sturdy screw terminals, and use up to four breakouts at the same time using the configurable I2C addresses. Great for home automation.
£14.10

In stock
DIN-rail extension relay card:
Upgrade your DIN-rail relay card (VM208) with 8 additional relays of 16 A @ 230 VAC.
£67.08£78.90

In stock
DIN rail WLAN relay card:
This new DIN rail WLAN relay card combines the strength of four robust relays that you can control via smartphone. In other words: this device enables you to remotely control any appliance in your electrical cabinet from anywhere in the world*!
£133.92£148.80

In stock
RevPi Connect SE – 16GB:
No appetite for restrictions? Realize your ideas with the open source IIoT gateway RevPi Connect.
£318£456

In stock
RevPi Connect SE – 8GB:
No appetite for restrictions? Realize your ideas with the open source IIoT gateway RevPi Connect.
£306£435

Out of stock
M5Stack UnitV2 M12 Version with Cameras:
UnitV2 is a high-efficiency Ai recognition module from M5Stack
£90

Out of stock
M5Stamp C3 Mate with Pin Headers:
M5Stack just added a new family to its popular series of modules with the new Stamp-C3 featuring ESPRESSIF ESP32-C3 RISC-V MCU with Wi-Fi and Bluetooth 5 (LE) connectivity for IoT edge devices.
£7.80

Out of stock
M5Stack Tough ESP32 IoT Development Board Kit:
The M5Stack Waterproof ESP32 embedded controller TOUGH is Industrial grade programmable embedded controller featuring Espressif ESP32 chipset with integrated WiFi & Bluetooth dual mode.
£48

In stock
RevPi MIO – Flexible and efficient I/O Module for Revolution Pi:
The new RevPi MIO is a multi-I/O expansion module that combines both digital and analog features.
£165.90£237

Out of stock
Raspberry Pi Compute Module 4 IO Board:
Exposing every interface from Raspberry Pi Compute Module 4, the Compute Module 4 IO Board provides a development platform and reference base-board design for the most powerful Compute Module yet.
£36

Out of stock
Raspberry Pi Compute Module 4 – No Wireless / 1GB RAM / 32GB Flash:
The power of Raspberry Pi 4 in a compact form factor for deeply embedded applications.
£48

Out of stock
Raspberry Pi Compute Module 4 – No Wireless / 1GB RAM / Lite:
The power of Raspberry Pi 4 in a compact form factor for deeply embedded applications.
£33.60

Out of stock
Raspberry Pi Compute Module 4 – Wireless / 4GB RAM / 32GB Flash:
The power of Raspberry Pi 4 in a compact form factor for deeply embedded applications.
£72

Out of stock
Raspberry Pi Compute Module 4 – Wireless / 4GB RAM / Lite:
The power of Raspberry Pi 4 in a compact form factor for deeply embedded applications.
£57.60

In stock
7-pin PCB female connector:
7 pole PCB female connector with sturdy spring connectors, no soldering required! Ideal for use with RevPi IO modules.
£5.28£7.50

In stock
Single-phase DIN rail mounted kWh meter:
This single-phase DIN rail kWh meter is a new generation of single-phase electronic watt-hour meters, adopting micro-electronic techniques, LSI circuits and advanced digital and SMT techniques.
£36£45

In stock
RevPi IO-module socket plug:
X2 & X4 plugs for Revolution Pi IO-modules X2 & X4 sockets.
£5.28£7.50

In stock
RevPi Gates – DMX:
Integrate Revolution Pi into an industrial network
£119.70£171

In stock
RevPi Gates – PROFINET IRT:
Integrate Revolution Pi into an industrial network
£176.40£252