Power your Raspberry Pi Build HAT projects with the Raspberry Pi Build HAT Power Supply. This 48W power supply will power the Build HAT and connected LEGO® Technic™ motors, as well as your Raspberry Pi computer.
Compatible with LEGO Technic motors and sensors included in the LEGO® Education SPIKE™ Portfolio, the Build HAT combines the power of Raspberry Pi computing with easy building opportunities to help you make creative and robust projects.
Specification
| Output | |
|---|---|
| Output voltage: | +8.0V DC |
| Minimum load current: | 0.01A |
| Nominal load current: | 6.0A |
| Maximum power: | 48.0W |
| Load regulation: | ±5% |
| Line regulation: | ±5% |
| Ripple & noise: | 200mVp-p |
| Rise time: | 100ms maximum to regulation limits for DC outputs |
| Turn-on delay: | 3000ms maximum at nominal input AC voltage and full load |
| Protection: | Short circuit protection |
| Overcurrent protection | |
| Overvoltage protection | |
| Efficiency: | 87.77% minimum (output current from 100%, 75%, 50%, 25%) |
| Output cable: | 1.5m 16AWG |
| Output connector: | Barrel connector |
| 5.5mm × 2.1mm × 11mm | |
| Centre positive | |
| Input | |
|---|---|
| Voltage range: | 100-240Vac (rated) |
| 96-264Vac (operating) | |
| Frequency: | 50/60Hz ±3Hz Current: 1.2A maximum |
| Power consumption (no load): | 0.1W maximum |
| Inrush current: | No damage shall occur and the input fuse shall not blow |