This proto-board is the PCB you always wish you had, but never realized it!
- The same basic layout of a quarter-sized breadboard (the PCB has 17 rows) turned into a beautiful PCB.
- The top side has a white silkscreen, and the same markings you're familiar with, to make transferring components easy.
- The bottom has a 4-hole pad design that matches a classic breadboard, with 4 power bus lines on the sides, and no mask so you can easily cut traces when necessary.
- 1.2mm diameter drill holes so even parts with big leads will fit.
- All holes are thru-plated for strength - these wont peel off with rework.
- The finish is a gold plate - you won't get oxidation like with bare copper perf
There are also tons of mounting holes so you can attach the PCB to your project box.
Comes with one PCB and one box header, you'll need to do a little light soldering to attach the box header to the PCB but its fast and easy to do. To connect it to a Pi, you'll also need a 26-pin GPIO cable if you don't already have one
- 13 rows of 4-pin holes breaking out the GPIO cable, 4 rows of double 4-pin hole rows
- 4 power rails with positive/negative markings
- 1.8" x 2.0" (46mm x 55mm), 0.063" thick FR4
- 1.2mm / 0.047" drill holes
EagleCAD PCB files on GitHub
Fritzing object in Adafruit Fritzing Library