{"title":"ThinkInk","description":"","products":[{"product_id":"adafruit-e-ink-bonnet-for-raspberry-pi-24-pin-e-paper-displays","title":"Adafruit E-Ink Bonnet for Raspberry Pi - 24-pin E-Paper Displays","description":"\u003cp\u003eThis add-on makes it a breeze to add any 'standard' pinout 24-pin flex-connector E-Ink display to your Raspberry Pi computer.\u003c\/p\u003e\n\u003cp\u003eThis bonnet handles all the extra components needed to make E-Paper interfacing easy for Pi and Pi-compatible boards. There's also extras like two user buttons, Stemma QT I2C port, and a 3W I2S speaker so you can also have audio playback. Insert your favorite E-Paper display to the connector and you'll have a powerful Linux-powered display for your desk or wall.\u003c\/p\u003e\n\u003cp\u003eChances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note that this does NOT come with the raw display itself\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e-\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-us\/collections\/thinkink\" rel=\"noopener\" target=\"_blank\"\u003ewe stock a wide variety of bare displays\u003c\/a\u003e that will work great. Don't forget to verify that each display needs driver code to match the driver chip. For displays Adafruit sell,  \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_CircuitPython_EPD\"\u003ethere are examples in their E-Ink Python library you can use to craft your own project\u003c\/a\u003e. Often times the E-Paper display has a short cable, in which case\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4230\"\u003ewe suggest using an extender cable\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eComes completely pre-assembled and tested\u003c\/strong\u003e so you can plug it in and install Python code! \u003cstrong\u003eWorks with any Raspberry Pi computer that has a 2x20 connector\u003c\/strong\u003e, such as the Pi B+, Pi 2, Pi 3, Pi 4, Pi 5, and Pi Zero (and any others that have a 2x20 connector!) For installing on Pi's where you need to clear a case or you don't want it against the board,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-us\/products\/booster-header\" rel=\"noopener\" target=\"_blank\"\u003egrab a 2x20 socket riser\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eSince there was some space on the bonnet Adafruit added a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-us\/products\/adafruit-i2s-3w-class-d-amplifier-breakout-max98357a\" rel=\"noopener\" target=\"_blank\"\u003eMAX98357 3W 4-8Ω speaker driver\u003c\/a\u003e which has digital I2S input for great sounding audio. This makes it easy to add audio alerts and feedback to your E-Paper projects.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/shop.pimoroni.com\/search?q=speaker\u0026amp;product_type=Component\" rel=\"noopener\" target=\"_blank\"\u003eNote you'll have to add a 4-8Ω speaker to the terminal blocks\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-us\/collections\/qw-st\" rel=\"noopener\" target=\"_blank\"\u003eOn the bottom, there is a Qwiic\/STEMMA QT connector for I2C sensors and devices so you can plug and play any STEMMA QT devices\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTo summarize, you will probably want some accessories to build a full project:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA matching 'bare' E-Paper display with standard 24-pin connector - \u003ca href=\"\/en-us\/collections\/thinkink\" rel=\"noopener\" target=\"_blank\"\u003ewe stock a wide variety of bare displays here\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.adafruit.com\/product\/4230\"\u003eAn extender cable\u003c\/a\u003e so you have plenty of maneuvering room\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/shop.pimoroni.com\/search?q=speaker\u0026amp;product_type=Component\" rel=\"noopener\" target=\"_blank\"\u003eA 4-8Ω speaker\u003c\/a\u003e if you want to use the onboard amplifier\u003c\/li\u003e\n\u003cli\u003eAnd of course a Raspberry Pi or other 2x20-connector'd single-board Linux computer!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003eProduct Dimensions: 65.0mm x 30.7mm x 14.0mm \/ 2.6\" x 1.2\" x 0.6\"\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 10.6g \/ 0.4oz\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-e-ink-bonnet-for-raspberry-pi\"\u003ePrimary Guide: Adafruit E-Ink Bonnet for Raspberry Pi\u003c\/a\u003e \u003cbr\u003eEasy e-paper finally comes to Raspberry Pi\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6418\/guides\" rel=\"noopener\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56151399334267,"sku":"ADA6418","price":11.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6418-01.jpg?v=1773335866"},{"product_id":"7-5-800x480-tri-color-eink-epaper-bare-display","title":"7.5\" 800x480 Tri-Color eInk \/ ePaper - Bare Display","description":"\u003cp\u003eFor folks who want to DIY their own E-Ink setups, this is a\u003cstrong\u003e 7.5\" diagonal Tri-Color eInk \/ ePaper Bare Display with 800 x 480 pixels.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.pimoroni.com\/collections\/displays?tags=e-ink%20Displays\" target=\"_blank\" rel=\"noopener\"\u003eE-Ink\/E-Paper displays\u003c\/a\u003e make for great low-power displays that are daylight visible and keep their image even when depowered.\u003c\/p\u003e\n\u003cp\u003eChances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is the bare display element.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYou need to plug it into a board with a 'standard' 24-pin FPC e-paper connector.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWe recommend checking out and picking up a matching driver board\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/5727\"\u003eFeather RP2040 ThinkInk\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- solderless plug-and-play solution with Arduino or CircuitPython support. Definitely the easiest way to get started, and is what we show in the demo above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/adafruit-eink-feather-friend-with-32kb-sram\" target=\"_blank\" rel=\"noopener\"\u003eeInk Feather Friend\u003c\/a\u003e\u003c\/strong\u003e - FeatherWing add-on for any Feather board)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/adafruit-eink-breakout-friend-with-32kb-sram\" target=\"_blank\" rel=\"noopener\"\u003eeInk Breakout Friend\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- breadboard-friendly adapter that gives you level-shifting and components for quick eInk connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4230\"\u003e24-pin eInk \/ ePaper Extension Cable\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e+\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4524\"\u003e24-pin FPC adapter\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- both together will give your eInk display a stretch so you can place it anywhere.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a 7.5\" tri-color (red, black, and white) display. It has 800x480 black, and red ink pixels and a white-ish background. It uses the UC8179 chipset, so make sure whatever firmware code you are planning to use has support for it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\"\u003eThe Arduino library we wrote does all the work for you, you can just interface with it as if it were an Adafruit_GFX compatible display\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNote that you cannot overlay\/mix pixels: each point can be one of the three 'colors', but you can't mix the red and black to make an orange. \u003ca href=\"https:\/\/learn.adafruit.com\/preparing-graphics-for-e-ink-displays\"\u003eInstead, check out our guide on dithering!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6415\/C22259-001_datasheet_ZJY800480-075AABMFGN-R.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/bare-e-ink-displays-crash-course\"\u003ePrimary Guide: Bare E-Ink Displays Crash Course\u003c\/a\u003e\nWhat's the deal with all of these eInk displays?\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-e-ink-bonnet-for-raspberry-pi\"\u003ePrimary Guide: Adafruit E-Ink Bonnet for Raspberry Pi\u003c\/a\u003e \u003cbr\u003eEasy e-paper finally comes to Raspberry Pi\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/products\/6415\/guides\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56151460807035,"sku":"ADA6415","price":50.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6415-03.jpg?v=1773333148"},{"product_id":"3-7-416x240-tri-color-red-black-white-eink-bare-display","title":"3.7\" 416x240 Tri-Color Red \/ Black \/ White eInk - Bare Display - UC8253","description":"\u003cp\u003e\u003cspan\u003eFor folks who want to DIY their own E-Ink setups, this is a\u003c\/span\u003e\u003cstrong\u003e 3.7\" diagonal Tri-Color (Red, Black, White) eInk \/ ePaper Bare Display with 416 x 240 pixels.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/shop.pimoroni.com\/collections\/displays?tags=e-ink%20Displays\" target=\"_blank\"\u003eE-Ink\/E-Paper displays\u003c\/a\u003e make for great low-power displays that are daylight visible and keep their image even when depowered.\u003c\/p\u003e\n\u003cp\u003eChances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is the bare display element.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYou need to plug it into a board with a 'standard' 24-pin FPC e-paper connector.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWe recommend checking out and picking up a matching driver board\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/5727\"\u003eFeather RP2040 ThinkInk\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- solderless plug-and-play solution with Arduino or CircuitPython support. Definitely the easiest way to get started, and is what we show in the demo above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"\/en-us\/products\/adafruit-eink-feather-friend-with-32kb-sram\" target=\"_blank\"\u003eeInk Feather Friend\u003c\/a\u003e\u003c\/strong\u003e - FeatherWing add-on for any Feather board)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"\/en-us\/products\/adafruit-eink-breakout-friend-with-32kb-sram\" target=\"_blank\"\u003eeInk Breakout Friend\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- breadboard-friendly adapter that gives you level-shifting and components for quick eInk connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4230\"\u003e24-pin eInk \/ ePaper Extension Cable\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e+\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4524\"\u003e24-pin FPC adapter\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- both together will give your eInk display a stretch so you can place it anywhere.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis is a 3.7\" tri-color display. It has 416x240 red or black ink pixels and a white-ish background. It uses the UC8253 chipset, so make sure whatever firmware code you are planning to use has support for it. \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\"\u003eThe Arduino library we wrote does all the work for you; you can just interface with it as if it were an Adafruit_GFX compatible display\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNote that you cannot overlay\/mix pixels: each point can be one of the three 'colors', but you can't mix the red and black to make an orange. \u003ca href=\"https:\/\/learn.adafruit.com\/preparing-graphics-for-e-ink-displays\"\u003eInstead, check out our guide on dithering!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6394\/P6394+C22269-001_datasheet_ZJY240416-037BABMFGN-R.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2011 65 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\"\u003e \u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2015 863 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/bare-e-ink-displays-crash-course\"\u003ePrimary Guide: Bare E-Ink Displays Crash Course\u003c\/a\u003e \u003cbr\u003eWhat's the deal with all of these eInk displays?\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6394\/guides\" rel=\"noopener\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56151540728187,"sku":"ADA6394","price":19.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6394-01.jpg?v=1773332939"},{"product_id":"2-66-296x152-tri-color-red-black-white-eink-bare-display-ssd1680z-chipset","title":"2.66\" 296x152 Tri-Color Red \/ Black \/ White EInk - Bare Display - SSD1680Z","description":"\u003cp\u003e\u003cspan\u003eFor folks who want to DIY their own E-Ink setups, this is a\u003c\/span\u003e\u003cstrong\u003e 2.66\" 296x152 Tri-Color Red \/ Black \/ White EInk - Bare Display - SSD1680Z Chipset.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/shop.pimoroni.com\/collections\/displays?tags=e-ink%20Displays\" target=\"_blank\"\u003eE-Ink\/E-Paper displays\u003c\/a\u003e make for great low-power displays that are daylight visible and keep their image even when depowered.\u003c\/p\u003e\n\u003cp\u003eChances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is the bare display element.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYou need to plug it into a board with a 'standard' 24-pin FPC e-paper connector.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWe recommend checking out and picking up a matching driver board\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/5727\"\u003eFeather RP2040 ThinkInk\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- solderless plug-and-play solution with Arduino or CircuitPython support. Definitely the easiest way to get started, and is what we show in the demo above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"\/en-us\/products\/adafruit-eink-feather-friend-with-32kb-sram\" target=\"_blank\"\u003eeInk Feather Friend\u003c\/a\u003e\u003c\/strong\u003e - FeatherWing add-on for any Feather board)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"\/en-us\/products\/adafruit-eink-breakout-friend-with-32kb-sram\" target=\"_blank\"\u003eeInk Breakout Friend\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- breadboard-friendly adapter that gives you level-shifting and components for quick eInk connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4230\"\u003e24-pin eInk \/ ePaper Extension Cable\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e+\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4524\"\u003e24-pin FPC adapter\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- both together will give your eInk display a stretch so you can place it anywhere.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis is a 2.66\" Tri-Color Red\/Black\/White display. It has 296x152 red or black ink pixels and a white-ish background. It uses the SSD1680Z chipset, so make sure whatever firmware code you are planning to use has support for it. \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\"\u003eThe Arduino library we wrote does all the work for you, you can just interface with it as if it were an Adafruit_GFX compatible display\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNote that you cannot overlay\/mix pixels: each point can be one of the three 'colors', but you can't mix the red and black to make an orange. \u003ca href=\"https:\/\/learn.adafruit.com\/preparing-graphics-for-e-ink-displays\"\u003eInstead, check out our guide on dithering!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6393\/P6393+C22273-001_datasheet_ZJY296152-0266EABMFGN-R.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2011 65 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\"\u003e \u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2015 863 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/bare-e-ink-displays-crash-course\"\u003ePrimary Guide: Bare E-Ink Displays Crash Course\u003c\/a\u003e \u003cbr\u003eWhat's the deal with all of these eInk displays?\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6393\/guides\" rel=\"noopener\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56151627235707,"sku":"ADA6393","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6393-00.jpg?v=1773337350"},{"product_id":"4-2-300x400-tri-color-eink-epaper-bare-display-ssd1683","title":"4.2\" 300x400 Tri-Color eInk \/ ePaper - Bare Display - SSD1683","description":"\u003cp\u003e\u003cspan\u003eFor folks who want to DIY their own E-Ink setups, this is a\u003c\/span\u003e\u003cstrong\u003e 4.2\" diagonal Tri-Color (Red, Black, White) eInk \/ ePaper Bare Display with 400 x 300 pixels.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.pimoroni.com\/collections\/displays?tags=e-ink%20Displays\" rel=\"noopener\" target=\"_blank\"\u003eE-Ink\/E-Paper displays\u003c\/a\u003e make for great low-power displays that are daylight visible and keep their image even when depowered.\u003c\/p\u003e\n\u003cp\u003eChances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is the bare display element.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYou need to plug it into a board with a 'standard' 24-pin FPC e-paper connector.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWe recommend checking out and picking up a matching driver board\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/5727\"\u003eFeather RP2040 ThinkInk\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- solderless plug-and-play solution with Arduino or CircuitPython support. Definitely the easiest way to get started, and is what we show in the demo above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/adafruit-eink-feather-friend-with-32kb-sram\" rel=\"noopener\" target=\"_blank\"\u003eeInk Feather Friend\u003c\/a\u003e\u003c\/strong\u003e - FeatherWing add-on for any Feather board)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/adafruit-eink-breakout-friend-with-32kb-sram\" rel=\"noopener\" target=\"_blank\"\u003eeInk Breakout Friend\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- breadboard-friendly adapter that gives you level-shifting and components for quick eInk connectivity.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4230\"\u003e24-pin eInk \/ ePaper Extension Cable\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e+\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4524\"\u003e24-pin FPC adapter\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- both together will give your eInk display a stretch so you can place it anywhere.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis is a 4.2\" tri-color display. It has 400x300 red or black ink pixels and a white-ish background. It uses the SSD1683 chipset, so make sure whatever firmware code you are planning to use has support for it. \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\"\u003eThe Arduino library we wrote does all the work for you, you can just interface with it as if it were an Adafruit_GFX compatible display\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNote that you cannot overlay\/mix pixels: each point can be one of the three 'colors', but you can't mix the red and black to make an orange. \u003ca href=\"https:\/\/learn.adafruit.com\/preparing-graphics-for-e-ink-displays\"\u003eInstead, check out our guide on dithering!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6382\/6382+C22266-001+datasheet+ZJY400300-042CABMFGN-R.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e \u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/bare-e-ink-displays-crash-course\"\u003ePrimary Guide: Bare E-Ink Displays Crash Course\u003c\/a\u003e \u003cbr\u003eWhat's the deal with all of these eInk displays?\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/products\/6382\/guides\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56151650173307,"sku":"ADA6382","price":19.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6382-00.jpg?v=1773333017"},{"product_id":"adafruit-3-52-340x180-quad-color-eink-epaper-bare-display","title":"Adafruit 3.52\" 340x180 Quad-Color eInk \/ ePaper - Bare Display","description":"\u003cp\u003eWhat's better than a tri-color E-Paper display? Quad-color, of course! This is a 3.52\" 340x180 Quad-Color eInk \/ ePaper Bare Display. \u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/shop.pimoroni.com\/collections\/displays?tags=e-ink%20Displays\" target=\"_blank\"\u003eE-Ink\/E-Paper displays\u003c\/a\u003e make for great low-power displays that are daylight visible and keep their image even when depowered.\u003c\/p\u003e\n\u003cp\u003eChances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is the bare display element\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eplus an adapter cable\u003cstrong\u003e.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYou need to plug it into a board with a 'standard' 24-pin FPC e-paper connector.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWe recommend checking out and picking up a matching driver board\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/5727\"\u003eFeather RP2040 ThinkInk\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- solderless plug-and-play solution with Arduino or CircuitPython support. Definitely the easiest way to get started, and is what we show in the demo above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"\/en-us\/products\/adafruit-eink-feather-friend-with-32kb-sram\" target=\"_blank\"\u003eeInk Feather Friend\u003c\/a\u003e\u003c\/strong\u003e - FeatherWing add-on for any Feather board)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"\/en-us\/products\/adafruit-eink-breakout-friend-with-32kb-sram\" target=\"_blank\"\u003eeInk Breakout Friend\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- breadboard-friendly adapter that gives you level-shifting and components for quick eInk connectivity.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a 3.52\" quad-color (red, black, yellow, and white) display. It has 340x180 black, red and yellow ink pixels and a white-ish background. It uses the JD79667 chipset, so make sure whatever firmware code you are planning to use has support for it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\"\u003eThe Arduino library we wrote does all the work for you, you can just interface with it as if it were an Adafruit_GFX compatible display\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eUnlike the vast majority of e-Ink displays, this one has a 'flipped' connector, with bottom contacts instead of top. You \u003cem\u003ecan \u003c\/em\u003euse it with standard 24-pin E-Ink driver boards,\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003ebut you need to attach the included extender and Flex A-B cable, which will flip the contacts over and make it work as expected.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eNote that you cannot overlay\/mix pixels: each point can be one of the four colors, but you can't, like, mix the red and yellow to make an orange.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/preparing-graphics-for-e-ink-displays\"\u003eInstead, check out our guide on dithering!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3.52\" 340x180 Quad-Color eInk \/ ePaper - Bare Display\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"\/en-us\/products\/24-pin-0-5mm-pitch-fpc-flex-a-b-d-type-cable\" target=\"_blank\"\u003e24-pin 0.5mm pitch FPC Flex A-B (D) type Cable - 50mm long\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4524\"\u003e24-pin 0.5mm FFC \/ FPC Extender\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6414\/P6414_C22271-001_datasheet_ZJY180384-0352AJH-E5______.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2011 65 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\"\u003e \u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2015 863 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/bare-e-ink-displays-crash-course\"\u003ePrimary Guide: Bare E-Ink Displays Crash Course\u003c\/a\u003e \u003cbr\u003eWhat's the deal with all of these eInk displays?\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6414\/guides\" rel=\"noopener\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56151677600123,"sku":"ADA6414","price":15.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6414-00.jpg?v=1773333927"},{"product_id":"2-13-250x122-quad-color-eink-epaper-bare-display","title":"2.13\" 250x122 Quad-Color eInk \/ ePaper - Bare Display","description":"\u003cp\u003eWhat's better than a tri-color E-Paper display? Quad-color, of course! This is a 2.13\" 250x122 Quad-Color eInk \/ ePaper Bare Display. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.pimoroni.com\/collections\/displays?tags=e-ink%20Displays\" rel=\"noopener\" target=\"_blank\"\u003eE-Ink\/E-Paper displays\u003c\/a\u003e make for great low-power displays that are daylight visible and keep their image even when depowered.\u003c\/p\u003e\n\u003cp\u003eChances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is the bare display element\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eplus an adapter cable\u003cstrong\u003e.\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eYou need to plug it into a board with a 'standard' 24-pin FPC e-paper connector.\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eWe recommend checking out and picking up a matching driver board\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/5727\"\u003eFeather RP2040 ThinkInk\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- solderless plug-and-play solution with Arduino or CircuitPython support. Definitely the easiest way to get started, and is what we show in the demo above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/adafruit-eink-feather-friend-with-32kb-sram\" rel=\"noopener\" target=\"_blank\"\u003eeInk Feather Friend\u003c\/a\u003e\u003c\/strong\u003e - FeatherWing add-on for any Feather board)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/adafruit-eink-breakout-friend-with-32kb-sram\" rel=\"noopener\" target=\"_blank\"\u003eeInk Breakout Friend\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- breadboard-friendly adapter that gives you level-shifting and components for quick eInk connectivity.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4230\"\u003e24-pin eInk \/ ePaper Extension Cable\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e+\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4524\"\u003e24-pin FPC adapter\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- both together will give your eInk display a stretch so you can place it anywhere.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan\u003eThis is a 2.13\" quad-color (red, black, yellow and white) display. It has 250x122 black, red and yellow ink pixels and a white-ish background. It uses the JD79661 chipset, so make sure whatever firmware code you are planning to use has support for it. \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\"\u003eThe Arduino library we wrote does all the work for you, you can just interface with it as if it were an Adafruit_GFX compatible display\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNote that you cannot overlay\/mix pixels: each point can be one of the four colors, but you can't, like, mix the red and yellow to make an orange.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/preparing-graphics-for-e-ink-displays\"\u003eInstead, check out our guide on dithering!\u003c\/a\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6373\/C22164-001_datasheet__ZJY122250-0213AJH-E5______.pdf\"\u003eeInk Display Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e \u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/bare-e-ink-displays-crash-course\"\u003ePrimary Guide: Bare E-Ink Displays Crash Course\u003c\/a\u003e \u003cbr\u003eWhat's the deal with all of these eInk displays?\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/products\/6373\/guides\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56151686709627,"sku":"ADA6373","price":7.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6373-00.jpg?v=1773337213"},{"product_id":"5-83-648x480-monochrome-black-white-eink-epaper-bare-display-uc8179-chipset","title":"5.83\" 648x480 Monochrome Black \/ White eInk \/ ePaper - Bare Display - UC8179","description":"\u003cp\u003eFor folks who want to DIY their own E-Ink setups, this is a 5.83\" Monochrome Black\/White EPD - Bare Display.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.pimoroni.com\/collections\/displays?tags=e-ink%20Displays\" rel=\"noopener\" target=\"_blank\"\u003eE-Ink\/E-Paper displays\u003c\/a\u003e make for great low-power displays that are daylight visible and keep their image even when depowered.\u003c\/p\u003e\n\u003cp\u003eChances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is the bare display element.\u003c\/strong\u003e\u003cspan\u003e You need to plug it into a board with a 'standard' 24-pin FPC e-paper connector. \u003c\/span\u003e\u003cstrong\u003eWe recommend checking out and picking up a matching driver board\u003c\/strong\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/5727\"\u003eFeather RP2040 ThinkInk\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- solderless plug-and-play solution with Arduino or CircuitPython support. Definitely the easiest way to get started, and is what we show in the demo above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/adafruit-eink-feather-friend-with-32kb-sram\" rel=\"noopener\" target=\"_blank\"\u003eeInk Feather Friend\u003c\/a\u003e\u003c\/strong\u003e - FeatherWing add-on for any Feather board)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/adafruit-eink-breakout-friend-with-32kb-sram\" rel=\"noopener\" target=\"_blank\"\u003eeInk Breakout Friend\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- breadboard-friendly adapter that gives you level-shifting and components for quick eInk connectivity.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4230\"\u003e24-pin eInk \/ ePaper Extension Cable\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e+\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4524\"\u003e24-pin FPC adapter\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- both together will give your eInk display a stretch so you can place it anywhere.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a 5.83\" Monochrome Black\/White Display. It has 648x480 black ink pixels and a white-ish background. It uses the UC8179 chipset, so make sure whatever firmware code you are planning to use has support for it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\"\u003eThe Arduino library we wrote does all the work for you; you can just interface with it as if it were an Adafruit_GFX compatible display\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDespite having only monochromatic pixels, it's possible to get nice-looking graphics on eInk displays: \u003ca href=\"https:\/\/learn.adafruit.com\/preparing-graphics-for-e-ink-displays\"\u003eCheck out our guide on dithering\u003c\/a\u003e for how to get the best output from these panels.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6397\/P6397+C22261-001_datasheet_ZJY648480-0583AAAMFGN.pdf\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e \u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/bare-e-ink-displays-crash-course\"\u003ePrimary Guide: Bare E-Ink Displays Crash Course\u003c\/a\u003e \u003cbr\u003eWhat's the deal with all of these eInk displays?\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/products\/6397\/guides\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56151699521915,"sku":"ADA6397","price":38.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6397-04.png?v=1773332647"},{"product_id":"2-66-296x152-monochrome-or-gray-eink-epaper-bare-display-ssd1680","title":"2.66\" 296x152 Monochrome or Gray eInk \/ ePaper - Bare Display - SSD1680","description":"\u003cp\u003eFor folks who want to DIY their own E-Ink setups, this is a 2.66\" diagonal 296x152 Monochrome or Gray eInk \/ ePaper Bare Display.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/shop.pimoroni.com\/collections\/displays?tags=e-ink%20Displays\" target=\"_blank\"\u003eE-Ink\/E-Paper displays\u003c\/a\u003e make for great low-power displays that are daylight visible and keep their image even when depowered.\u003c\/p\u003e\n\u003cp\u003eChances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is the bare display element.\u003c\/strong\u003e\u003cspan\u003e You need to plug it into a board with a 'standard' 24-pin FPC e-paper connector. \u003c\/span\u003e\u003cstrong\u003eWe recommend checking out and picking up a matching driver board\u003c\/strong\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/5727\"\u003eFeather RP2040 ThinkInk\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- solderless plug-and-play solution with Arduino or CircuitPython support. Definitely the easiest way to get started, and is what we show in the demo above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"\/en-us\/products\/adafruit-eink-feather-friend-with-32kb-sram\" target=\"_blank\"\u003eeInk Feather Friend\u003c\/a\u003e\u003c\/strong\u003e - FeatherWing add-on for any Feather board)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"\/en-us\/products\/adafruit-eink-breakout-friend-with-32kb-sram\" target=\"_blank\"\u003eeInk Breakout Friend\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- breadboard-friendly adapter that gives you level-shifting and components for quick eInk connectivity.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4230\"\u003e24-pin eInk \/ ePaper Extension Cable\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e+\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4524\"\u003e24-pin FPC adapter\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- both together will give your eInk display a stretch so you can place it anywhere.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a 2.66\" Monochrome Black\/White display. It has 296x152 black ink pixels and a white-ish background. It uses the SSD1680 chipset, so make sure whatever firmware code you are planning to use has support for it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\"\u003eThe Arduino library we wrote does all the work for you, you can just interface with it as if it were an Adafruit_GFX compatible display\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNote that you can put this display into a '4-gray' mode, where you get two extra monochromatic shades. It's not\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eofficially\u003c\/em\u003e supported by the display but it does kinda work.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/preparing-graphics-for-e-ink-displays\"\u003eCheck out our guide on dithering\u003c\/a\u003e for how to get the best output from these panels.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6392\/P6392+C22382+C22272-001_datasheet_ZJY296152-0266EAAMFGN.pdf\" target=\"_blank\" rel=\"noopener\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2011 65 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\"\u003e \u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2015 863 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/bare-e-ink-displays-crash-course\"\u003ePrimary Guide: Bare E-Ink Displays Crash Course\u003c\/a\u003e \u003cbr\u003eWhat's the deal with all of these eInk displays?\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6392\/guides\" rel=\"noopener\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56151709876603,"sku":"ADA6392","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6392-00.jpg?v=1773331895"},{"product_id":"3-7-416x240-monochrome-black-white-eink-epaper-bare-display-uc8253-chipset","title":"3.7\" 416x240 Monochrome Black\/White eInk \/ ePaper - Bare Display - UC8253","description":"\u003cp\u003eFor folks who want to DIY their own E-Ink setups, this is a 3.7\" 416x240 Pixel Monochrome Black\/White EPD - Bare Display.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.pimoroni.com\/collections\/displays?tags=e-ink%20Displays\" rel=\"noopener\" target=\"_blank\"\u003eE-Ink\/E-Paper displays\u003c\/a\u003e make for great low-power displays that are daylight visible and keep their image even when depowered.\u003c\/p\u003e\n\u003cp\u003eChances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is the bare display element.\u003c\/strong\u003e\u003cspan\u003e You need to plug it into a board with a 'standard' 24-pin FPC e-paper connector. \u003c\/span\u003e\u003cstrong\u003eWe recommend checking out and picking up a matching driver board\u003c\/strong\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/5727\"\u003eFeather RP2040 ThinkInk\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- solderless plug-and-play solution with Arduino or CircuitPython support. Definitely the easiest way to get started, and is what we show in the demo above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/adafruit-eink-feather-friend-with-32kb-sram\" rel=\"noopener\" target=\"_blank\"\u003eeInk Feather Friend\u003c\/a\u003e\u003c\/strong\u003e - FeatherWing add-on for any Feather board)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/adafruit-eink-breakout-friend-with-32kb-sram\" rel=\"noopener\" target=\"_blank\"\u003eeInk Breakout Friend\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- breadboard-friendly adapter that gives you level-shifting and components for quick eInk connectivity.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4230\"\u003e24-pin eInk \/ ePaper Extension Cable\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e+\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4524\"\u003e24-pin FPC adapter\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- both together will give your eInk display a stretch so you can place it anywhere.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a 3.7\" Monochrome Black\/White display. It has 416x240 black ink pixels and a white-ish background. It uses the UC8253 chipset, so make sure whatever firmware code you are planning to use has support for it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\"\u003eThe Arduino library we wrote does all the work for you; you can just interface with it as if it were an Adafruit_GFX compatible display\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eDespite having only monochromatic pixels, it's possible to get nice looking graphics on eInk displays: \u003ca href=\"https:\/\/learn.adafruit.com\/preparing-graphics-for-e-ink-displays\"\u003eCheck out our guide on dithering\u003c\/a\u003e for how to get the best output from these panels.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6395\/P6395+C22268-001_datasheet_ZJY240416-037BAAMFGN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e \u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/bare-e-ink-displays-crash-course\"\u003ePrimary Guide: Bare E-Ink Displays Crash Course\u003c\/a\u003e \u003cbr\u003eWhat's the deal with all of these eInk displays?\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/products\/6395\/guides\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56151719838075,"sku":"ADA6395","price":17.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6395-03.png?v=1773332004"},{"product_id":"2-13-250x122-monochrome-or-gray-eink-epaper-bare-display-ssd1680z-chip","title":"2.13\" 250x122 Monochrome or Gray eInk \/ ePaper - Bare Display - SSD1680Z","description":"\u003cp\u003eFor folks who want to DIY their own E-Ink setups, this is a 2.13\" diagonal 250x122 Monochrome or Gray eInk \/ ePaper Bare Display.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/shop.pimoroni.com\/collections\/displays?tags=e-ink%20Displays\" rel=\"noopener\" target=\"_blank\"\u003eE-Ink\/E-Paper displays\u003c\/a\u003e make for great low-power displays that are daylight visible and keep their image even when depowered.\u003c\/p\u003e\n\u003cp\u003eChances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is the bare display element.\u003c\/strong\u003e\u003cspan\u003e You need to plug it into a board with a 'standard' 24-pin FPC e-paper connector. \u003c\/span\u003e\u003cstrong\u003eWe recommend checking out and picking up a matching driver board\u003c\/strong\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/5727\"\u003eFeather RP2040 ThinkInk\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- solderless plug-and-play solution with Arduino or CircuitPython support. Definitely the easiest way to get started, and is what we show in the demo above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/adafruit-eink-feather-friend-with-32kb-sram\" rel=\"noopener\" target=\"_blank\"\u003eeInk Feather Friend\u003c\/a\u003e\u003c\/strong\u003e - FeatherWing add-on for any Feather board)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-us\/products\/adafruit-eink-breakout-friend-with-32kb-sram\" rel=\"noopener\" target=\"_blank\"\u003eeInk Breakout Friend\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- breadboard-friendly adapter that gives you level-shifting and components for quick eInk connectivity.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4230\"\u003e24-pin eInk \/ ePaper Extension Cable\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e+\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4524\"\u003e24-pin FPC adapter\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- both together will give your eInk display a stretch so you can place it anywhere.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a 2.13\" monochrome\/4gray display. It has 250x122 black ink pixels and a white-ish background. It uses the SSD1680Z chipset, so make sure whatever firmware code you are planning to use has support for it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\"\u003eThe Arduino library we wrote does all the work for you, you can just interface with it as if it were an Adafruit_GFX compatible display\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNote that you can put this display into a '4-gray' mode, where you get two monochromatic shades. It's not\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eofficially\u003c\/em\u003e supported by the display but it does kinda work.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/preparing-graphics-for-e-ink-displays\"\u003eCheck out our guide on dithering\u003c\/a\u003e for how to get the best output from these panels.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6383\/P6383+C13256-007+datasheet+ZJY122250-0213BAAMFGN.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e \u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/bare-e-ink-displays-crash-course\"\u003ePrimary Guide: Bare E-Ink Displays Crash Course\u003c\/a\u003e \u003cbr\u003eWhat's the deal with all of these eInk displays?\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/products\/6383\/guides\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56151749591419,"sku":"ADA6383","price":6.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6383-00.jpg?v=1773331735"},{"product_id":"4-2-300x400-monochrome-or-4-gray-eink-epaper-bare-display-ssd1683","title":"4.2\" 300x400 Monochrome or 4-Gray eInk \/ ePaper - Bare Display - SSD1683","description":"\u003cp\u003eFor folks who want to DIY their own E-Ink setups, this is a 4.2\" diagonal Monochrome or 4-level Grayscale eInk \/ ePaper Bare Display with 400 x 300 pixels.\u003c\/p\u003e\n\u003cp\u003e\u003ca rel=\"noopener\" href=\"https:\/\/shop.pimoroni.com\/collections\/displays?tags=e-ink%20Displays\" target=\"_blank\"\u003eE-Ink\/E-Paper displays\u003c\/a\u003e make for great low-power displays that are daylight visible and keep their image even when depowered.\u003c\/p\u003e\n\u003cp\u003eChances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: this is the bare display element.\u003c\/strong\u003e\u003cspan\u003e You need to plug it into a board with a 'standard' 24-pin FPC e-paper connector. \u003c\/span\u003e\u003cstrong\u003eWe recommend checking out and picking up a matching driver board\u003c\/strong\u003e\u003cspan\u003e:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/5727\"\u003eFeather RP2040 ThinkInk\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- solderless plug-and-play solution with Arduino or CircuitPython support. Definitely the easiest way to get started, and is what we show in the demo above\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"\/en-us\/products\/adafruit-eink-feather-friend-with-32kb-sram\" target=\"_blank\"\u003eeInk Feather Friend\u003c\/a\u003e\u003c\/strong\u003e - FeatherWing add-on for any Feather board)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca rel=\"noopener\" href=\"\/en-us\/products\/adafruit-eink-breakout-friend-with-32kb-sram\" target=\"_blank\"\u003eeInk Breakout Friend\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e- breadboard-friendly adapter that gives you level-shifting and components for quick eInk connectivity.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4230\"\u003e24-pin eInk \/ ePaper Extension Cable\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e+\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4524\"\u003e24-pin FPC adapter\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- both together will give your eInk display a stretch so you can place it anywhere.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis is a 4.2\" monochrome\/4gray display. It has 400x300 black ink pixels and a white-ish background. It uses the SSD1683 chipset, so make sure whatever firmware code you are planning to use has support for it.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\"\u003eThe Arduino library we wrote does all the work for you, you can just interface with it as if it were an Adafruit_GFX compatible display\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eNote that you can put this display into a '4-gray' mode, where you get two extra monochromatic shades. It's not\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eofficially\u003c\/em\u003e supported by the display but it does kinda work.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/preparing-graphics-for-e-ink-displays\"\u003eCheck out our guide on dithering\u003c\/a\u003e for how to get the best output from these panels.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6381\/P6381+C22265-001+datasheet+ZJY400300-042CAAMFGN.pdf\" rel=\"noopener\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2011 65 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\"\u003e \u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2015 863 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/bare-e-ink-displays-crash-course\"\u003ePrimary Guide: Bare E-Ink Displays Crash Course\u003c\/a\u003e \u003cbr\u003eWhat's the deal with all of these eInk displays?\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6381\/guides\" rel=\"noopener\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56151755686267,"sku":"ADA6381","price":19.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6381-00.jpg?v=1773332242"},{"product_id":"24-pin-0-5mm-pitch-fpc-flex-a-b-d-type-cable","title":"24-pin 0.5mm pitch FPC Flex A-B (D) type Cable","description":"\u003cp\u003eA flexible 24-pin FPC that can be used for connecting up Adafruit E-Ink bare displays with a 'flipped' connector.\u003c\/p\u003e\n\u003cp\u003eConnect this to that when a 24-pin FPC connector is needed. This cable is made of a flexible PCB. It's A-B style (sometimes referred to as D style), which means that pin one on one side will match with pin one on the other side. How handy! \u003c\/p\u003e\n\u003cp\u003eWe're stocking this to use with Adafruit's e-Ink\/e-Paper boards when they have 'flipped' connectors, but you could, of course, use it for anything that needs a 0.5mm pitch FPC.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6384\/P6384+C22336-001+C5151987.pdf\"\u003eDiagram\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"50mm long","offer_id":56151783080315,"sku":"ADA6384","price":0.75,"currency_code":"GBP","in_stock":true},{"title":"100mm long","offer_id":56151783113083,"sku":"ADA6385","price":0.75,"currency_code":"GBP","in_stock":true},{"title":"250mm long","offer_id":56151783145851,"sku":"ADA6386","price":0.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6384-00.jpg?v=1773335003"}],"url":"https:\/\/shop.pimoroni.com\/en-us\/collections\/thinkink.oembed","provider":"Pimoroni Ltd","version":"1.0","type":"link"}