{"product_id":"zumo-shield-for-arduino-v1-3","title":"Zumo Shield for Arduino, v1.3","description":"\u003cp\u003eThis shield makes it easy to build an Arduino-controlled Zumo robot.\u003c\/p\u003e\n\u003cp\u003eThe shield mounts onto an assembled \u003ca href=\"\/en-eu\/products\/zumo-chassis-kit-no-motors\" target=\"_blank\"\u003eZumo chassis\u003c\/a\u003e, connecting directly to the chassis’s battery terminals and motors, and the Arduino plugs into the shield, face down.\u003c\/p\u003e\n\u003cp\u003eThis shield includes dual motor drivers, a buzzer for playing simple sounds and music, a user pushbutton, and a 3-axis accelerometer, compass, and gyroscope. The shield boosts the battery voltage to power the Arduino, and it breaks out the Arduino I\/O lines, reset button, and user LED for convenient access and to accommodate additional sensors for things like obstacle and edge detection.\u003c\/p\u003e\n\u003cp\u003eThe Zumo Shield is designed specifically to be a convenient interface between a \u003ca href=\"\/en-eu\/products\/zumo-chassis-kit-no-motors\" target=\"_blank\"\u003eZumo chassis\u003c\/a\u003e and an A-Star 32U4 Prime, \u003ca href=\"\/en-eu\/products\/arduino-uno-rev3\" target=\"_blank\"\u003eArduino Uno\u003c\/a\u003e, or \u003ca href=\"\/en-eu\/products\/arduino-leonardo-1\" target=\"_blank\"\u003eArduino Leonardo\u003c\/a\u003e. The shield mounts directly to the chassis, connecting to its battery terminals and motors, and the A-Star Prime or Arduino plugs into the shield’s male header pins, face down. The shield provides all the electronics necessary to power the motors and includes some additional fun components for making a more interesting robot, such as a buzzer for making sounds, and a 3-axis accelerometer, compass, and gyroscope for sensing impacts and tracking orientation.\u003c\/p\u003e\n\u003cp\u003eWith the Zumo Shield and an Arduino, the Zumo chassis becomes a low-profile, Arduino-controlled tracked robot that is less than 10 cm on each side (small enough to qualify for Mini-Sumo competitions). It works with a variety of \u003ca href=\"\/en-eu\/?q=gearmotor\" target=\"_blank\"\u003emicro metal gearmotors\u003c\/a\u003e to allow for a customizable combination of torque and speed, and a \u003ca href=\"\/en-eu\/products\/basic-sumo-blade-for-zumo-chassis\" target=\"_blank\"\u003estainless steel sumo blade\u003c\/a\u003e is available for applications that involve pushing around other objects. Arduino libraries and sample sketches are available for quickly getting a Zumo robot up and running.\u003c\/p\u003e\n\u003cp\u003eThis is the v1.3 version of the Zumo Shield. It uses an LSM6DS33 accelerometer and gyro and an LIS3MDL magnetometer, replacing the LSM303D and L3GD20H sensors on the previous v1.2 revision. You can use the updated \u003ca href=\"https:\/\/www.pololu.com\/product\/linkurl0J600\" target=\"_blank\"\u003eZumo Shield Arduino library\u003c\/a\u003e to help you write code that will work with the inertial sensors on any revision.\u003c\/p\u003e\n\u003cp\u003eIn addition, the power switch and pushbuttons on the v1.3 shield are surface-mount components instead of through-hole parts like those on the v1.2 version.\u003c\/p\u003e\n\u003cp\u003eFor more information, see the \u003ca href=\"https:\/\/www.pololu.com\/docs\/0J57\" target=\"_blank\"\u003euser’s guide\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated DRV8835 dual motor drivers capable of delivering enough current for two high-power (HP) micro metal gearmotors.\u003c\/li\u003e\n\u003cli\u003eBuzzer for playing simple sounds and music. The buzzer is controlled by one of the Arduino’s PWM outputs, so the tones can be generated in the background without taking up a lot of processing power.\u003c\/li\u003e\n\u003cli\u003eIntegrated LSM6DS33 3-axis accelerometer and gyro and LIS3MDL 3-axis magnetometer. These inertial sensors can be used for applications like sensing impacts to the Zumo and measuring its rotation.\u003c\/li\u003e\n\u003cli\u003eOptional user pushbutton on pin 12.\u003c\/li\u003e\n\u003cli\u003e7.5 V boost regulator for powering the Arduino from the Zumo’s 4 AA batteries.\u003c\/li\u003e\n\u003cli\u003eConvenient access to Arduino I\/O lines, the pin 13 user LED, and the Arduino reset line via the shield.\u003c\/li\u003e\n\u003cli\u003eGeneral-purpose prototyping areas and an expansion area at the front for connecting additional sensors (it is easy to add a \u003ca href=\"\/en-eu\/products\/zumo-reflectance-sensor-array\" target=\"_blank\"\u003eZumo reflectance sensor array\u003c\/a\u003e or up to five \u003ca href=\"\/en-eu\/products\/qtr-1rc-reflectance-sensor-2-pack\" target=\"_blank\"\u003eQTR sensors\u003c\/a\u003e for edge detection or line following).\u003c\/li\u003e\n\u003cli\u003eCompatible with the Arduino Uno R3 and Arduino Leonardo, and can also be used with older Arduinos that have the same form factor, like the Duemilanove.\u003c\/li\u003e\n\u003cli\u003eAn \u003ca href=\"https:\/\/github.com\/pololu\/zumo-shield-arduino-library\" target=\"_blank\"\u003eArduino library\u003c\/a\u003e and sample code make getting started easy.\u003c\/li\u003e\n\u003cli\u003eDetailed \u003ca href=\"https:\/\/www.pololu.com\/docs\/0J57\" target=\"_blank\"\u003euser’s guide\u003c\/a\u003e with assembly instructions.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eIncluded Components\u003c\/h2\u003e\n\u003cp\u003eThe Zumo Shield ships with all of the components required for shield assembly. Note that soldering is required; please see the \u003ca href=\"https:\/\/www.pololu.com\/docs\/0J57\" target=\"_blank\"\u003euser’s guide\u003c\/a\u003e for detailed assembly instructions. This shield does \u003cstrong\u003enot\u003c\/strong\u003e include motors or the Zumo chassis itself.\u003c\/p\u003e\n\u003ch2\u003eRequired Accessories (not included)\u003c\/h2\u003e\n\u003cp\u003eTo use this shield you will need a few additional parts:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/zumo-chassis-kit-no-motors\" target=\"_blank\"\u003eA Zumo chassis kit\u003c\/a\u003e. This shield is also available as part of a Zumo robot kit bundled with the Zumo chassis kit and a Zumo blade and part of a preassembled Zumo Robot.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/?q=gearmotor\" target=\"_blank\"\u003eTwo micro metal gearmotors\u003c\/a\u003e. These gearmotors are available in several power options and a wide variety of gear ratios, allowing for a customizable combination of torque and speed. The Zumo Shield can deliver enough power for all of the micro metal gearmotors we carry, including the high-power (HP) versions.\u003c\/li\u003e\n\u003cli\u003eFour AA batteries. The Zumo chassis works with both alkaline and NiMH batteries, though Pololu recommend rechargeable NiMH cells.\u003c\/li\u003e\n\u003cli\u003eAn Arduino or compatible control board. The Zumo Shield works with the A-Star 32U4 Prime, \u003ca href=\"\/en-eu\/products\/arduino-uno-rev3\" target=\"_blank\"\u003eArduino Uno\u003c\/a\u003e and \u003ca href=\"\/en-eu\/products\/arduino-leonardo-1\" target=\"_blank\"\u003eArduino Leonardo\u003c\/a\u003e. It is not compatible with the Arduino Mega or Due, but it can be used with older Arduinos that have the same form factor as the Uno, such as the Duemilanove. (Other Arduino-compatible controllers might work with the Zumo robot, but support for them will be limited and they might require modification; for example, one customer got his Zumo robot working with the Freescale FRDM-KL25Z board.)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eOptional Accessories\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/zumo-reflectance-sensor-array\" target=\"_blank\"\u003eZumo reflectance sensor array\u003c\/a\u003e. This sensor bar mounts along the front edge of the Zumo shield and allows the Zumo to detect features on the ground in front of it, such as lines for following or edges for avoiding (such as the rim of a sumo ring or the edge of a table). It is designed specifically for use with the Zumo shield.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/basic-sumo-blade-for-zumo-chassis\" target=\"_blank\"\u003eZumo blade\u003c\/a\u003e for pushing objects and other robots around\u003c\/li\u003e\n\u003cli\u003eiMAX-B6AC battery charger for charging the Zumo’s battery’s through the Zumo Shield’s 2-pin charge port. Note that you only need a battery charger if you plan on powering the Zumo with rechargeable cells, and that charger should be capable of charging 4 NiMH cells in series. Alternatively, since the Zumo just uses ordinary AA batteris, you can use AA chargers (into which you stick the individual cells) available at most general electronics stores.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/?q=sharp+distance+sensor\" target=\"_blank\"\u003eOptical rangefinders\u003c\/a\u003e for obstacle\/opponent detection.\u003c\/li\u003e\n\u003cli\u003eConnectors (headers, jumper wires, etc) for adding more sensors.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDocumentation and other information\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.pololu.com\/docs\/0J57\" target=\"_blank\"\u003ePololu Zumo Shield for Arduino User’s Guide (Printable PDF)\u003c\/a\u003e - User’s manual for the Pololu Zumo Shield for Arduino.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eFile downloads\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.pololu.com\/file\/0J1767\/zumo-shield-v1.3-schematic.pdf\" target=\"_blank\"\u003eSchematic diagram of the Zumo Shield for Arduino, v1.3\u003c\/a\u003e (183k pdf)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.pololu.com\/file\/0J592\/zumo_shield_front_expansion_pinout.pdf\" target=\"_blank\"\u003eZumo Shield front expansion pinout\u003c\/a\u003e (552k pdf)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.pololu.com\/file\/0J1768\/zumo-shield-v1.3-dimensions.pdf\" target=\"_blank\"\u003eDimension diagram of the Zumo Shield for Arduino, v1.3\u003c\/a\u003e (657k pdf)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.pololu.com\/file\/0J1769\/zumo-shield-v1.3.step\" target=\"_blank\"\u003e3D model of the Zumo Shield for Arduino, v1.3\u003c\/a\u003e (17MB step)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.pololu.com\/file\/0J1770\/zum01d-drill.dxf\" target=\"_blank\"\u003eDrill guide for the Zumo Shield for Arduino, v1.3\u003c\/a\u003e (219k dxf) This DXF drawing shows the locations of all of the board’s holes.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.pololu.com\/file\/0J1280\/Pololu-Zumo-Shield-Arduino-Francais.pdf\" target=\"_blank\"\u003eGuide utilisateur du Robot Zumo Pololu\u003c\/a\u003e (2MB pdf) - Un guide complet pour assembler, utiliser et exploiter rapidement votre Robot Zumo (version 0.1). Note: This French translation of the Zumo Robot for Arduino user’s guide was made by distributor MCHobby.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRecommended links\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/pololu\/zumo-shield-arduino-library\" target=\"_blank\"\u003eZumo Shield Arduino library\u003c\/a\u003e - This library and examples for Arduino-compatible boards makes it easy to program an Arduino-controlled robot built with Pololu’s Zumo Shield or Zumo robot kit.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/www.mathworks.com\/matlabcentral\/fileexchange\/45886-simulink-library-for-zumo-robot\" target=\"_blank\"\u003eSimulink Library for Zumo Robot\u003c\/a\u003e - This library can be used to program an Arduino-controlled Zumo through MATLAB and Simulink. It provides driver blocks for all the sensors present on the Zumo Robot as well as example models showing their usage.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/zumo-robot-control-with-simulink\" target=\"_blank\"\u003eHow to program a Zumo robot with Simulink\u003c\/a\u003e - This tutorial on the Adafruit Learning System guides you through the process of programming a Zumo robot with Simulink.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/pixy-pet-robot-color-vision-follower-using-pixycam\/\" target=\"_blank\"\u003ePixy Pet Robot tutorial: adding color vision to the Zumo Robot for Arduino with a Pixy CMUCam-5\u003c\/a\u003e - This tutorial from Adafruit shows how to pair a Pixy CMUCam-5 vision system with the Zumo Robot for Arduino to enable it to chase objects or follow you around.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/mcuoneclipse.com\/2013\/12\/12\/zumo-robot-last-tuning-tips\/\" target=\"_blank\"\u003eZumo robot tuning tips\u003c\/a\u003e - This article was written by Professor Erich Styger for his class on embedded systems programming at the Lucerne University of Applied Sciences and Arts. It describes various ways to tweak the performance of a Zumo to be more competitive in a Mini Sumo competition. Note that his Zumos use a custom PCB rather than the Zumo shield for Arduino; the shield has a lot of capacitance in parallel with the batteries that generally prevents the “battery inertia” problem Erich describes.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/forum.pololu.com\/viewtopic.php?f=29\u0026amp;t=6657\" target=\"_blank\"\u003eFreedom Zumo Robot\u003c\/a\u003e - This robot is uses the Zumo robot kit, 75:1 micro metal gearmotors, and a Zumo reflectance sensor array. Instead of an Arduino it uses a Freescale FRDM-KL25Z as the microcontroller board, and sample code is available for line following and maze solving. By Erich, March 2013.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.ti.com\/lit\/ds\/symlink\/drv8835.pdf\" target=\"_blank\"\u003eTexas Instruments DRV8835 motor driver datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pololu","offers":[{"title":"Default Title","offer_id":32384310607955,"sku":"POL-2521","price":33.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/0J10903.1200.jpg?v=1611923979","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/zumo-shield-for-arduino-v1-3","provider":"Pimoroni Ltd","version":"1.0","type":"link"}