{"product_id":"tinys3-esp32-s3","title":"TinyS3[D] - ESP32-S3 Dev Board with Dual Antenna","description":"\u003cp\u003eTinyS3[D] is the best of Unexpected Maker's super popular range of \"Tiny\" development boards.\u003c\/p\u003e\n\u003cp\u003eIt's packed with amazing features and peripherals, wireless connectivity and stacks of Flash and PSRAM, all in the same tiny package size as the original TinyPICO!\u003c\/p\u003e\n\u003cp\u003eTinyS3[D] combines the previous TinyS3 and TinyS3 uFL boards into a single board, giving you more options and no need to pick one or the other. It also replaces the VBAT ADC sense pin with an I2C battery fuel gauge.\u003c\/p\u003e\n\u003cp\u003eTinyS3[D] has full drop-in compatibility with the previous TinyS3 versions, but Unexpected Maker did need to extend the board length by 1.3mm to fit everything in and still allow for a solid, well-tuned RF layout.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/esp32s3.com\/images\/series_d\/main_features_tinys3d.jpg\" alt=\"Hero\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cp\u003eThe TinyS3[D] includes the following features:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDual 32bit Xtensa LX7 cores @ up to 240Mhz\u003c\/li\u003e\n\u003cli\u003eRISC-V Ultra Low Power Co-processor\u003c\/li\u003e\n\u003cli\u003e2.4GHz Wifi - 802.11b\/g\/n\u003c\/li\u003e\n\u003cli\u003eBluetooth LE 5 + Mesh\u003c\/li\u003e\n\u003cli\u003e8MB QSPI Flash\u003c\/li\u003e\n\u003cli\u003e8MB of extra QSPI PSRAM\u003c\/li\u003e\n\u003cli\u003e700mA 3.3V LDO Regulator\u003c\/li\u003e\n\u003cli\u003eLow power RGB LED\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eULTRA LOW Deep Sleep Current\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eUSB-C Connector with back-feed protection\u003c\/li\u003e\n\u003cli\u003eNative USB + USB Serial JTAG\u003c\/li\u003e\n\u003cli\u003eLiPo Battery Charging\u003c\/li\u003e\n\u003cli\u003ePads on the back for JST PH connector\u003c\/li\u003e\n\u003cli\u003e5V Sense Pins\u003c\/li\u003e\n\u003cli\u003e17 GPIO\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEW\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e3D High Gain Antenna AND u.FL connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNEW\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eI2C Battery Fuel Gauge\u003c\/li\u003e\n\u003cli\u003eCompatible with TinyPICO \u0026amp; TinyS2\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003e\u003cspan\u003eNEW! Two antenna options on the one board!\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003eTinyS3[D] includes an onboard antenna and a u.FL connector for an external antenna on the same board, and you can switch which antenna to use via the RF switch on the fly from inside your code!\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe onboard antenna is selected by default, so you never need to worry about the RF switch being in a bad state, or the ESP32-S3 getting damaged if you forget to plug in an external antenna.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003e\u003cspan\u003eTiny Board Comparison Matrix\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/d2j6dbq0eux0bg.cloudfront.net\/images\/wysiwyg\/product\/90477757\/759468759\/1752135854690-2125585892\/tiny_board_comparison_matrix_jpg.jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003ePinout\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003e\u003cimg src=\"https:\/\/s3.amazonaws.com\/images.ecwid.com\/images\/wysiwyg\/product\/90477757\/602208790\/1699344246507962359259\/TinyXXX_Pinout_Matrix_jpg\"\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cspan\u003eBoard Dimensions: 36.3mm x 17.8mm\u003c\/span\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cspan\u003eMax Thickness: 4.3mm at the USB-C end\u003c\/span\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlatforms\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/d2j6dbq0eux0bg.cloudfront.net\/images\/wysiwyg\/product\/90477757\/577111310\/1735085821321-319379275\/logo_dev_platforms_png.png\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUnexpected Maker ESP32-S3 boards ship with CircuitPython pre-installed!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003ePlease check out the new PLATFORMS area of the \u003c\/span\u003e\u003ca href=\"https:\/\/esp32s3.com\/getting-started.html\"\u003eGetting Started\u003c\/a\u003e\u003cspan\u003e guide to find out all about developing for your new board in a range of different languages.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eCheck out the \u003ca href=\"https:\/\/esp32s3.com\/tinys3d.html\" rel=\"noopener\" target=\"_blank\"\u003eTinyS3[D] page\u003c\/a\u003e for schematics, dimensions, 3D models and more!\u003c\/span\u003e\u003c\/p\u003e","brand":"Unexpected Maker","offers":[{"title":"Default Title","offer_id":39854967881811,"sku":"TS3D-01","price":17.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/TinyS3_D__Product.jpg?v=1753282029","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/tinys3-esp32-s3","provider":"Pimoroni Ltd","version":"1.0","type":"link"}