{"product_id":"tinyc6-esp32-c6","title":"TinyC6 - ESP32-C6 Dev Board with Onboard Antenna","description":"\u003cp\u003eIntroducing the TinyC6 which includes the new Espressif ESP32-C6 MCU.\u003c\/p\u003e\n\u003cp\u003eThe ESP32-C6 is the first WiFi 6 (2.45GHz) MCU from Espressif, that also has a high and low-performance RISC-V core and Zigbee + Thread support!\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/s3.amazonaws.com\/images.ecwid.com\/images\/wysiwyg\/product\/90477757\/602208790\/17002665312021822357179\/main_features_tinyc6_jpg\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e32Bit High Perf RISC-V processor up to 160MHz\u003c\/li\u003e\n\u003cli\u003e32-bit Low Power RISC-V processor at 20Mhz\u003c\/li\u003e\n\u003cli\u003e2.4GHz WiFi 6 - 802.11ax\u003c\/li\u003e\n\u003cli\u003eBluetooth 5.3 (LE) + Mesh\u003c\/li\u003e\n\u003cli\u003eZigbee and Thread (802.15.4)\u003c\/li\u003e\n\u003cli\u003e8MB QSPI Flash\u003c\/li\u003e\n\u003cli\u003eUSB-C Connector\u003c\/li\u003e\n\u003cli\u003eReverse USB back-feed protection\u003c\/li\u003e\n\u003cli\u003e700mA 3.3V LDO Regulator\u003c\/li\u003e\n\u003cli\u003eUltra low deep sleep current\u003c\/li\u003e\n\u003cli\u003eLow Power RGB LED\u003c\/li\u003e\n\u003cli\u003eVBAT voltage check and 5V presence detection\u003c\/li\u003e\n\u003cli\u003eLiPo Battery Charging\u003c\/li\u003e\n\u003cli\u003eJST pads on the back supports PH connector\u003c\/li\u003e\n\u003cli\u003ePower (red), Charge (orange) LEDs\u003c\/li\u003e\n\u003cli\u003e17x GPIO broken out\u003c\/li\u003e\n\u003cli\u003eSerial UART \u0026amp; Serial JTAG\u003c\/li\u003e\n\u003cli\u003e3D High Gain Antenna\u003c\/li\u003e\n\u003cli\u003eCompatible with TinyPICO, TinyS2 \u0026amp; TinyS3\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTiny Board Comparison Matrix\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/s3.amazonaws.com\/images.ecwid.com\/images\/wysiwyg\/product\/90477757\/602208790\/1700200532345-1427772097\/tiny_comparison_matrix_tinyc6_jpg\"\u003e\u003c\/p\u003e\n\u003ch2\u003ePinout\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/d2j6dbq0eux0bg.cloudfront.net\/images\/90477757\/3960737589.jpg\" alt=\"TinyC6\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eBoard Dimensions: 35mm x 17.8mm\u003c\/li\u003e\n\u003cli\u003eMax Thickness: 4.3mm at the USB-C end\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePlatforms\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eThis board ships with CircuitPython pre-installed!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe TinyC6 ships with an early alpha version of CircuitPython that supports the ESP32-C6.\u003c\/p\u003e\n\u003cp\u003eThere is also Arduino support in the upcoming 3.0.0 version of the ESP32 Arduino Core (currently in alpha) and IDF support in release 5.1 and later.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note:\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eThe ESP32-C6 doesn't have native USB - so in CircuitPython it will not present itself as a mass storage device like ESP32-S2 and ESP32-S3 devices do. To connect to the TinyC6 to access the Flash file system or for REPL access, you connect to it via the serial port like you do with an ESP32-C3 or original ESP32.\u003c\/p\u003e\n\u003cp\u003eAdafruit recommend using\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/thonny.org\/\"\u003ethonny\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eCircuitPython\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edevelopment on boards that don't have native USB. Once installed, select CircuitPython from the interpreter list in options, and then select the serial port for your TinyC6.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/s3.amazonaws.com\/images.ecwid.com\/images\/wysiwyg\/product\/90477757\/602208790\/17004407394851877885025\/thonny_circuitpython_setup_jpg\"\u003e\u003c\/p\u003e\n\u003cp\u003eIf you need to re-flash CircuitPython back on to your TinyC6, for now the shipping version is available from\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/unexpectedmaker.com\/files\/circuitpython\/tinyc6\/cp_tinyc6_firmware_9_alpha_5.bin\"\u003ehere\u003c\/a\u003e, and you can flash it to your board any following these instructions:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.Download the firmware\u003c\/li\u003e\n\u003cli\u003e2 Put your board into download mode\u003c\/li\u003e\n\u003cli\u003e3. Flash it with the following command, changing {PORT} to the correct port on your computer\/OS:\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ccode\u003eesptool.py -p {PORT} --before=default_reset --after=no_reset write_flash 0x0000 cp_tinyc6_firmware_9_alpha_5.bin\u003c\/code\u003e\u003c\/p\u003e\n\u003cp\u003eIf you plan to develop in the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eArduino IDE\u003c\/strong\u003e, please ensure you have the latest alpha version of 3.0.0 (or later) installed via the board manager, using the Development release link via\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/docs.espressif.com\/projects\/arduino-esp32\/en\/latest\/installing.html\"\u003ethese instructions provided by Espressif\u003c\/a\u003e. Please note that though ESP32-C6 support is included, the UMTinyC6 board definition will not be available until the next alpha or beta release. It was merged after alpha 2 was released.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/s3.amazonaws.com\/images.ecwid.com\/images\/wysiwyg\/product\/90477757\/602208790\/17004413624901954432217\/arduino_esp32_alpha_jpg\"\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cspan\u003eResources\u003c\/span\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cspan\u003eLooking for TinyC6 schematics or other documentation? \u003c\/span\u003eCheck out the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/help.unexpectedmaker.com\/index.php\/article-categories\/documentation\/\"\u003eUnexpected Maker Help\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ewebsite for more information.\u003c\/p\u003e","brand":"Unexpected Maker","offers":[{"title":"Default Title","offer_id":55640963645819,"sku":"TC6-01","price":15.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/tinyC6.jpg?v=1753355349","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/tinyc6-esp32-c6","provider":"Pimoroni Ltd","version":"1.0","type":"link"}