{"product_id":"sparkfun-temperature-sensor-stts22h-qwiic","title":"SparkFun Temperature Sensor - STTS22H (Qwiic)","description":"\u003cp\u003eThe SparkFun STTS22H Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power, high-accuracy, digital temperature sensor from ST Microelectronics and housed in the standard Qwiic form factor.\u003c\/p\u003e\n\u003cp\u003eThanks to its factory calibration the STTS22H offers high-end accuracy performance over the entire operating temperature range, reaching as low as ±0.5°C without requiring any further calibration at the application level.\u003c\/p\u003e\n\u003cp\u003eThe sensor operating mode is user-configurable and allows selecting between different ODRs (down to 1Hz) or the one-shot mode for battery saving. In one-shot mode, the sensor current consumption falls to 1.75µA. Peripheral addresses are also user-configurable and allow up to four different addresses to be specified by manipulating the jumpers on the back of the breakout. In addition, an interrupt pin is available to signal the application whenever the user-selectable high or low threshold has been exceeded.\u003c\/p\u003e\n\u003cp\u003eHook-up is a breeze as the breakout board uses the Qwiic Connect System. The breakout board has built-in 2.2kΩ pullup resistors for I2C communications. If you’re hooking up multiple I2C devices on the same bus, you may want to disable these resistors.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe \u003ca href=\"\/en-eu\/collections\/qwiic\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSparkFun Qwiic Connect System\u003c\/a\u003e is an ecosystem of I2C sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/2757?_ga=2.134610993.1340292557.1675167484-708024729.1513008105\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eGet started with the SparkFun STTS22H Qwiic Temperature Sensor Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eUses I\u003csup\u003e2\u003c\/sup\u003eC interface (Qwiic-enabled)\u003c\/li\u003e\n\u003cli\u003eFour selectable addresses\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e0x3C (default)\u003c\/strong\u003e, 0x3E, 0x38, 0x3F\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40°C to +125°C\u003c\/li\u003e\n\u003cli\u003eTemperature accuracy (max): ± 0.5°C (-10°C to +60°C)\u003c\/li\u003e\n\u003cli\u003eOperating voltage: 1.5V to 3.6V\n\u003cul\u003e\n\u003cli\u003eTypically\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e3.3V\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eif using the Qwiic cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eUltralow current: 1.75µA in one-shot mode\u003c\/li\u003e\n\u003cli\u003eProgrammable thresholds with interrupt pin\u003c\/li\u003e\n\u003cli\u003eProgrammable operating modes\n\u003cul\u003e\n\u003cli\u003eFreerun, one-shot, and Low-ODR\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eNIST traceability\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/1\/a\/7\/2\/1\/SparkFun_Temperature_Sensor-STTS22H-Schematic.pdf\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/9\/e\/1\/7\/6\/SparkFun_Temperature_Sensor-STTS22H-EagleFiles.zip\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/8\/b\/5\/2\/b\/SparkFun_Temperature_Sensor-STTS22H-BoardOutline.png\"\u003eBoard Dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/2757\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/3\/0\/b\/7\/6\/STTS22h-Datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003e(STTS22H)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eQwiic Info Page\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_STTS22H_Arduino_Library\"\u003eSTTS22H Arduino Library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/SparkFun_Temperature_Sensor-STTS22H\"\u003eGitHub Hardware Repo\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":40511531548755,"sku":"SEN-21262","price":6.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/STTS22-_01.jpg?v=1675172404","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/sparkfun-temperature-sensor-stts22h-qwiic","provider":"Pimoroni Ltd","version":"1.0","type":"link"}