{"product_id":"sparkfun-openlog-artemis","title":"SparkFun OpenLog Artemis","description":"\u003cp\u003eThe SparkFun OpenLog Artemis is an open source data logger that comes preprogrammed to automatically log IMU, GPS, serial data, and various pressure, humidity, and distance sensors. All without writing a single line of code!\u003c\/p\u003e\n\u003cp\u003eOpenLog Artemis, or \"OLA,\" automatically detects, configures, and logs Qwiic sensors. The OLA is specifically designed for users who just need to capture a lot of data to a CSV and get back to their larger project.\u003c\/p\u003e\n\u003cp\u003eIncluded on every OpenLog Artemis is an IMU for built-in logging of triple-axis accelerometer, gyro, and magnetometer. Whereas the original 9DOF Razor used the old MPU-9250, the OpenLog Artemis uses the latest ICM-20948 from InvenSense capable of nearly 250Hz logging of all nine axes. Simply power up the OpenLog Artemis and all incoming serial data is automatically recorded to a log file with baud rates up to 921600bps, supported! The OLA also has four ADC channels available on the edge of the board. Voltages up to 2V can be logged with 14-bit precision up to 1900Hz for one channel and 1000Hz logging all four channels. Additionally, based on feedback from users they've added an on-board RTC so that all data can be time stamped.\u003c\/p\u003e\n\u003cp\u003eThe OpenLog Artemis is highly configurable over an easy to use serial interface. Simply plug in a USB-C cable and open a terminal at 115200bps. The logging output is automatically streamed to both the terminal and the microSD. Pressing any key will open the configuration menu.\u003c\/p\u003e\n\u003cp\u003eThe OpenLog Artemis automatically scans, detects, configures, and logs various Qwiic sensors plugged into the board (No soldering! No programming!). Currently, auto-detection is supported on the following Qwiic products:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003euBlox GPS Modules (Lat\/Long, Altitude, Velocity, SIV, Time, Date):\n\u003cul\u003e\n\u003cli\u003eZED-F9P 1cm High Precision GPS\u003c\/li\u003e\n\u003cli\u003eNEO-M8P-2 2.5cm High Precision GPS\u003c\/li\u003e\n\u003cli\u003eSAM-M8Q 1.5m 72 Channel GPS\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/sparkfun-gps-breakout-zoe-m8q-qwiic\" target=\"_blank\"\u003eZOE-M8Q\u003c\/a\u003e 1.5m Compact GPS\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/sparkfun-gps-breakout-neo-m9n-u-fl-qwiic\" target=\"_blank\"\u003eNEO-M9N\u003c\/a\u003e 1.5m GPS\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eMCP9600 Thermocouple Amplifier\u003c\/li\u003e\n\u003cli\u003eNAU7802 Load Cell Amplifier\u003c\/li\u003e\n\u003cli\u003eLPS25HB Barometric Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eBME280 Humidity and Barometric Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eMS5637 Barometric Pressure Sensor\u003c\/li\u003e\n\u003cli\u003eMS8607 Pressure Humidity Temperature Sensor\u003c\/li\u003e\n\u003cli\u003eTMP117 High Precision Temperature Sensor\u003c\/li\u003e\n\u003cli\u003eAHT20 Humidity and Temperature Sensor\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/sparkfun-humidity-sensor-breakout-shtc3-qwiic\" target=\"_blank\"\u003eSHTC3 Humidity and Temperature Sensor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCCS811 Air Quality Sensor\u003c\/li\u003e\n\u003cli\u003eSGP30 Air Quality Sensor\u003c\/li\u003e\n\u003cli\u003eSCD30 CO\u003csub\u003e2\u003c\/sub\u003e and Air Quality Sensor\u003c\/li\u003e\n\u003cli\u003eVEML6075 UV Sensor\u003c\/li\u003e\n\u003cli\u003eVCNL4040 Proximity Sensor\u003c\/li\u003e\n\u003cli\u003eVL53L1X LIDAR Distance Sensor\u003c\/li\u003e\n\u003cli\u003eADS122C04 ADC PT100 Sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/sparkfun-qwiic-mux-breakout-8-channel-tca9548a\" target=\"_blank\"\u003eQwiic Mux\u003c\/a\u003e allowing for the chaining of up to 64 unique buses!\u003c\/li\u003e\n\u003cli\u003eMore boards are being added all the time!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThis OpenLog uses common microSD cards to record clear text, comma separated files. The OpenLog Artemis supports microSD cards formatted as FAT32 as well as the older FAT16 formats up to 32GB. Currently, the OpenLog Artemis does not support microSD cards formatted with exFAT but SparkFun plan to offer support for it in the future\u003c\/p\u003e\n\u003cp\u003eVery low power logging is supported. OpenLog Artemis can be configured to take readings at 500 times a second, or as slow as 1 reading every 24 hours. You choose! When there is more than 2 seconds between readings OLA will automatically power down itself and the sensors on the bus resulting in a sleep current of approximately 18uA. This means a normal 2Ah battery will enable logging for more than 4,000 days! OpenLog Artemis has built-in LiPo charging set at 450mA\/hr.\u003c\/p\u003e\n\u003cp\u003eNew features are constantly being added so SparkFun have released an easy to use firmware upgrade tool. No need to install Arduino or a bunch of libraries, simply open the \u003ca href=\"https:\/\/github.com\/sparkfun\/Artemis-Firmware-Upload-GUI\" target=\"_blank\"\u003eArtemis Firmware Upload GUI\u003c\/a\u003e, load the latest OLA firmware, and add features to OpenLog Artemis as they come out!\u003c\/p\u003e\n\u003cp\u003eThe OLA can be tailored to many different applications and SparkFun will be releasing custom versions of the firmware\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThe SparkFun Qwiic connect system is an ecosystem of I\u003csup\u003e2\u003c\/sup\u003eC sensors, actuators, shields and cables that make prototyping faster and less prone to error. All Qwiic-enabled boards use a common 1mm pitch, 4-pin JST connector. This reduces the amount of required PCB space, and polarized connections mean you can’t hook it up wrong.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/1213\" target=\"_blank\"\u003eGet started with the SparkFun OpenLog Artemis Hookup Guide\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eArtemis Module (Cortex-M4F based Apollo3 microcontroller)\n\u003cul\u003e\n\u003cli\u003eConfigurable via CH340E and Artemis Firmware Upload GUI\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating voltage range\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e3.3V to 6.5V\u003c\/strong\u003e (via VIN with optional external power switch)\n\u003cul\u003e\n\u003cli\u003e5V with USB (via 5V or USB type C)\u003c\/li\u003e\n\u003cli\u003e3.6V to 4.2V with LiPo battery (via VBATT or 2-pin JST)\n\u003cul\u003e\n\u003cli\u003eBuilt-in MCP73831 single cell LiPo charger\u003c\/li\u003e\n\u003cli\u003eMinimum 450mA charge rate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e3.3V (via 3V3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eCurrent consumption\n\u003cul\u003e\n\u003cli\u003e~20mA (Run)\u003c\/li\u003e\n\u003cli\u003e~80µA (Sleep)\u003c\/li\u003e\n\u003cli\u003e~18µA (Deep Sleep - regulator shut down)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePorts\n\u003cul\u003e\n\u003cli\u003e1x USB type C\u003c\/li\u003e\n\u003cli\u003e1x LiPo battery enabled\u003c\/li\u003e\n\u003cli\u003e1x Qwiic enabled I\u003csup\u003e2\u003c\/sup\u003eC with power control\u003c\/li\u003e\n\u003cli\u003e1x SWD 2x5 header\u003c\/li\u003e\n\u003cli\u003e4x Analog-to-digital\n\u003cul\u003e\n\u003cli\u003e14-bit, up to 1900Hz, 2V max (3.3V compatible)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSerial\n\u003cul\u003e\n\u003cli\u003eLogging speeds up to 500000bps \u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/openlog-artemis-hookup-guide\/hardware-overview#baud\" target=\"_blank\" data-mce-href=\"https:\/\/learn.sparkfun.com\/tutorials\/openlog-artemis-hookup-guide\/hardware-overview#baud\"\u003e\u003csup\u003e[1]\u003c\/sup\u003e\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x microSD socket\n\u003cul\u003e\n\u003cli\u003eSupport for FAT32 and older FAT16 formats up to 32GB with power control\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eRTC with 1mAhr battery backup\u003c\/li\u003e\n\u003cli\u003e9-axis IMU logging up to 250Hz\n\u003cul\u003e\n\u003cli\u003eICM-20948 via SPI interface\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLEDs\n\u003cul\u003e\n\u003cli\u003ePower\u003c\/li\u003e\n\u003cli\u003eLiPo charge indicator\u003c\/li\u003e\n\u003cli\u003eSerial Tx and Rx\u003c\/li\u003e\n\u003cli\u003eStatus\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/8\/9\/1\/d\/e\/SparkFun_OpenLog_Artemis_9DoF_IMU_Schematic.pdf\" target=\"_blank\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/3\/0\/4\/8\/d\/SparkFun_OpenLog_Artemis_9DoF_IMU_v10.zip\" target=\"_blank\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/openlog-artemis-hookup-guide?_ga=2.29666362.442303989.1599036432-416501732.1599036432\" target=\"_blank\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/8\/2\/1\/a\/4\/SparkFun_OpenLog_Artemis-9DoF_Board_Dimensions.png\" target=\"_blank\"\u003eBoard Dimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/d\/e\/8\/b\/4\/Apollo3_Blue_MCU_Data_Sheet_v0_12_1_rZ9Akgo.pdf\" target=\"_blank\"\u003eDatasheet \u003c\/a\u003e(Apollo3)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/7\/f\/e\/c\/d\/DS-000189-ICM-20948-v1.3.pdf\" target=\"_blank\"\u003eDatasheet \u003c\/a\u003e(ICM-20948)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/8\/7\/5\/3\/f\/Artemis_Integration_Guide.pdf\" target=\"_blank\"\u003eArtemis Integration Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/designing-with-the-sparkfun-artemis?_ga=2.227297304.442303989.1599036432-416501732.1599036432\" target=\"_blank\"\u003eDesigning with the SparkFun Artemis\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/artemis-development-with-arduino?_ga=2.239906054.442303989.1599036432-416501732.1599036432\" target=\"_blank\"\u003eArtemis Development with Arduino\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Arduino_Apollo3\" target=\"_blank\"\u003eArduino Core\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/forum.sparkfun.com\/viewforum.php?f=167\u0026amp;_ga=2.239906054.442303989.1599036432-416501732.1599036432\" target=\"_blank\"\u003eArtemis Forums\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/artemis\" target=\"_blank\"\u003eArtemis Info Page\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\" target=\"_blank\"\u003eQwiic Info Page\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/Artemis-Firmware-Upload-GUI\" target=\"_blank\"\u003eArtemis Firmware Uploader GUI\u003c\/a\u003e\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eLatest OLA firmware: \u003ca href=\"https:\/\/github.com\/sparkfun\/OpenLog_Artemis\/tree\/master\/Binaries\" target=\"_blank\"\u003ev1.5\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/OpenLog_Artemis_Geophone_Logger\" target=\"_blank\"\u003eGeophone Logger firmware\u003c\/a\u003e for logging seismic activity\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/sparkfun\/OpenLog_Artemis_GNSS_Logger\" target=\"_blank\"\u003eGNSS Logger\u003c\/a\u003e for advanced data logging with the uBlox F9 and M9 GNSS modules including support for RAWX and RELPOSNED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/OpenLog_Artemis\/tree\/master\" target=\"_blank\"\u003eGitHub Hardware Repo\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":32204741083219,"sku":"DEV-16832","price":47.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/16832-SparkFun_OpenLog_Artemis-01.jpg?v=1599046388","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/sparkfun-openlog-artemis","provider":"Pimoroni Ltd","version":"1.0","type":"link"}