{"product_id":"rp2040-stamp-carrier","title":"RP2040 Stamp Carrier","description":"\u003cp\u003eA reference design for the RP2040 Stamp, also a full-fledged RP2040 Uno form-factor development board!\u003c\/p\u003e\n\u003cp\u003eThe Carrier is a reference design for the \u003ca href=\"\/en-eu\/products\/rp2040-stamp\" target=\"_blank\"\u003eRP2040 Stamp\u003c\/a\u003e. It comes with a combo SMD\/TH Stamp footprint, you can solder the Stamp directly to the Carrier or use 2mm pin headers + sockets to be able to plug it in and out.\u003c\/p\u003e\n\u003cp\u003eThe Carrier extends the functionality of the Stamp by adding a BOOTSEL button, LiPo and Qwiic connectors, USR and PWR LEDs, an SWD header, and a USB Type-C connector.\u003c\/p\u003e\n\u003cp\u003eThe board can be powered from the LiPo, over USB, or with a DC jack.\u003c\/p\u003e\n\u003cp\u003eBy using the RP2040 Stamp Carrier, you get everything that comes with \u003ca href=\"\/en-eu\/products\/rp2040-stamp\" target=\"_blank\"\u003ethe Stamp itself:\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e8MB of FLASH\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e500mA 3.3V LDO\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eA Neopixel\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003eLiPo supply and charging circuit (with charging LED)\u003c\/li\u003e\n\u003cli\u003eA reset button\u003c\/li\u003e\n\u003cli\u003e12MHz crystal\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOn top of that you get:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA bootsel button\u003c\/li\u003e\n\u003cli\u003e3.7\/4.2V LiPo connector\u003c\/li\u003e\n\u003cli\u003eQwiic connector\u003c\/li\u003e\n\u003cli\u003eUSR LED\u003c\/li\u003e\n\u003cli\u003ePower (3.3V) LED\u003c\/li\u003e\n\u003cli\u003eSWD header\u003c\/li\u003e\n\u003cli\u003eUSB Type-C connector\u003c\/li\u003e\n\u003cli\u003eDC Jack\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe DC Jack input is center-positive and supports voltages in the range of 7-12V. If you have the LiPo and either DC or USB connected, the battery will begin charging.\u003c\/p\u003e\n\u003cp\u003eThe board follows the Uno shield pinout, making it compatible with a large ecosystem of shields, as long as they work on 3.3V IOs. \u003cstrong\u003eThe pins are not 5V-tolerant\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eThe SWD header follows the Cortex 10-pin standard.\u003c\/p\u003e\n\u003cp\u003eThe CircuitPython firmware for the RP2040 Stamp comes with a built-in board file for the Carrier, you can access it using \u003ccode\u003eimport stamp_carrier_board as board\u003c\/code\u003e. After that, you can access all the Carrier pins and interfaces like you would with any other CPY board.\u003c\/p\u003e\n\u003ch2\u003eIncludes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAn Uno form-factor RP2040 Stamp Carrier board\u003c\/li\u003e\n\u003cli\u003eA set of socket headers: 1x 6 pin header, 2x 8 pin headers, 1x 10 pin header (all not soldered)\u003c\/li\u003e\n\u003cli\u003eA pinout and functionality reference sheet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecs and Docs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/rp2040-stamp.solder.party\/carrier\" target=\"_blank\"\u003eDocumentation\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/solderparty\/rp2040_stamp_carrier_hw\" target=\"_blank\"\u003eDesign Files\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Solder Party","offers":[{"title":"Default Title","offer_id":39567569453139,"sku":"SP012","price":6.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/KAB_9442.jpg?v=1640105338","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/rp2040-stamp-carrier","provider":"Pimoroni Ltd","version":"1.0","type":"link"}