{"product_id":"pololu-track-set-1","title":"Pololu Track Set","description":"\u003cp\u003eThis set contains components for adding a tracked drive system to a small robot or vehicle.\u003c\/p\u003e\n\u003cp\u003eThis track set includes a pair of silicone tracks, two coloured drive sprockets measuring 35 mm (1.4″) in diameter, and two matching idler sprockets along with mounting hardware.\u003c\/p\u003e\n\u003cp\u003eTo work properly with the track, the drive and idler sprockets should be set up approximately \u003cstrong\u003e48 mm (1.9″) apart for the 22T and 85 mm (3.35″) apart for the 30T\u003c\/strong\u003e. The drive sprockets are designed to work with 3mm D-shafts, such as those on our \u003ca href=\"\/en-eu\/products\/micro-metal-gearmotor-extended-back-shaft\" target=\"_blank\"\u003emicro metal gearmotors\u003c\/a\u003e. These are the same tracks and sprockets used on the \u003ca href=\"\/en-eu\/products\/zumo-chassis-kit-no-motors\" target=\"_blank\"\u003eZumo chassis\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eKit consists of:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eTwo silicone tracks\u003c\/li\u003e\n\u003cli\u003eTwo ABS drive sprockets\u003c\/li\u003e\n\u003cli\u003eTwo ABS idler sprockets\u003c\/li\u003e\n\u003cli\u003eTwo M3 shoulder bolts with a 5mm threaded portion\u003c\/li\u003e\n\u003cli\u003eTwo M3 shoulder bolts with a 12mm threaded portion\u003c\/li\u003e\n\u003cli\u003eTwo washers and M3 nuts\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe flexible one-piece silicone tracks are available in two lengths, with either 22 teeth or 30 teeth that are designed to mesh with the drive and idler sprockets. The 22T set, with an overall length under 90 mm, is short enough to be used as the drive system for a mini-sumo robot (for example, the \u003ca href=\"\/en-eu\/products\/zumo-chassis-kit-no-motors\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eZumo chassis\u003c\/a\u003e).\u003c\/p\u003e\n\u003cp\u003eThe drive sprockets are designed to press-fit securely on the output shafts of our \u003ca href=\"\/en-eu\/products\/micro-metal-gearmotor-extended-back-shaft\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emicro metal gearmotors\u003c\/a\u003e. On the Zumo robots, these gearmotors are intended to be mounted \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/0J6692.1200.png?14134903788622126424\" target=\"_blank\"\u003ewith the raised lip on one side of the drive sprocket facing away from the motor\u003c\/a\u003e, but if you are not using a Zumo chassis, you can insert the drive sprockets onto the 3mm D-shafts in either orientation.\u003c\/p\u003e\n\u003cp\u003eAlthough the drive sprockets are similar to the hubs used in the \u003ca href=\"\/en-eu\/products\/pololu-wheel-42x19mm-pair\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePololu 42×19mm wheels\u003c\/a\u003e, they are not as wide, so they do not physically support the whole tire.\u003c\/p\u003e\n\u003cp\u003eA pair of idler sprockets is also included in the set; these are very similar to the drive sprockets, with the main difference being that they are designed to spin freely instead of attaching to a motor shaft. They can be mounted with the provided shoulder bolts as shown in the diagram below. (The blue component labeled “ROBOT CHASSIS” represents a bracket or piece of a robot chassis that the sprocket is being mounted to, and is not a part included in the set.)\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/0J7941.1200_large.png?v=1509378124\"\u003e\u003c\/p\u003e\n\u003cp\u003eIncluded are two pairs of shoulder bolts, one with a 5mm threaded portion and one a 12mm threaded portion, so you can pick the pair that is appropriate for your application. You will only use two of the four included shoulder bolts.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA dimension diagram containing the sprockets, tracks, and bolts is available \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/pololu-track-set-dimensions.pdf?14134903788622126424\" target=\"_blank\"\u003ehere\u003c\/a\u003e (618k pdf). Several key dimensions are highlighted below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSprocket diameter: 35 mm (1.38″)\u003c\/li\u003e\n\u003cli\u003eDiameter with track: approx. 39 mm (1.54″)\u003c\/li\u003e\n\u003cli\u003eTrack width: 14.6 mm (0.57″)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe threaded portion of the shoulder bolts can be cut to the desired length.\u003c\/p\u003e\n\u003cp\u003eThe ideal spacing between the centers of the two sprockets is about 48 mm for the 22T tracks and 85 mm for the 30T tracks. Because the tracks are elastic, they will maintain tension even if you do not precisely match this distance. However, if the spacing is too short, they will be loose and more likely to slip off; if the spacing is too long, additional strain will be placed on the sprocket shafts, and the motor might not be able to turn as well.\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/0J7923.1200_large.jpg?v=1509378238\"\u003e\u003c\/p\u003e\n\u003cp\u003eThese track sets are similar to the original 22T and 30T track sets, except they replace the old sprockets with newer, spoked versions. This spoked design removes material from several areas near the central hub of the sprocket, which has the advantage of allowing the drive sprocket to be more easily removed from the D-shaft of the motor while still remaining firmly fixed after being press-fit into place.\u003c\/p\u003e","brand":"Pololu","offers":[{"title":"22T - Black","offer_id":933150982154,"sku":"POL-3030","price":12.95,"currency_code":"EUR","in_stock":false},{"title":"22T - Red","offer_id":39351805378643,"sku":"POL-3031","price":12.95,"currency_code":"EUR","in_stock":false},{"title":"22T - White","offer_id":39351807705171,"sku":"POL-3032","price":12.95,"currency_code":"EUR","in_stock":false},{"title":"30T - Black","offer_id":933151014922,"sku":"POL-3033","price":14.95,"currency_code":"EUR","in_stock":false},{"title":"30T - Red","offer_id":39351808852051,"sku":"POL-3034","price":14.95,"currency_code":"EUR","in_stock":false},{"title":"30T - White","offer_id":39351809212499,"sku":"POL-3035","price":14.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/0J7930.1200.jpg?v=1621952675","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/pololu-track-set-1","provider":"Pimoroni Ltd","version":"1.0","type":"link"}