{"product_id":"kitronik-tricolour-led-board","title":"Kitronik Tricolour LED Board","description":"\u003cp\u003eThe Kitronik TriColour LED board is a pre-built strip board designed for low-power lighting displays, such as edge-lit signs and illustrations.\u003c\/p\u003e\n\u003cp\u003eIt has been designed such that its power requirement is within the supply rating of a computer USB port (under 100mA).\u003c\/p\u003e\n\u003cp\u003eThe Tri-Colour board features 15 LEDs; 5 x green, 5 x blue, and 5 x Red running in three colour rows down the length of the board. This allows for edge-lit designs featuring three separately lit acrylic sign parts, making it a great platform for more ambitious and imaginative designs.\u003c\/p\u003e\n\u003cp\u003eThe PCB is approximately 75mm long, 17mm wide, and is provided with a pair of M3 mounting holes, and sets of alignment holes to align 3mm (nominal) acrylic with the LEDs. The side-mounted switch can be used to turn on\/off the LEDs. An additional switch can be connected in parallel with the PCB switch to allow remote mounting within an enclosure.\u003c\/p\u003e\n\u003cp\u003eWhen using a remote switch the PCB-mounted switch should be left switched to ‘Off’. The remote switch is wired across the pads marked +5V and Switched Voltage.\u003c\/p\u003e\n\u003cp\u003ePower is supplied to the tri-colour board via a Micro USB power connector. It is possible to connect a non-USB power supply to the board via the 5V and 0V pads. \u003cstrong\u003eCaution:\u003c\/strong\u003e voltages over 5.5V may cause damage to the board. Wire to +5V and 0V to use the onboard switch, or wire the 5V to a remote switch and then into the Switched Voltage and 0V pads to use a remote switch.\u003c\/p\u003e\n\u003cp\u003eIt is possible to wire one switch to control several boards simultaneously. \u003cstrong\u003eCaution:\u003c\/strong\u003e voltages over 5V may cause permanent damage to the board.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLevel up your edge-lit signs, static displays, and illustrations with the TriColour LED board.\u003c\/li\u003e\n\u003cli\u003e5 LEDs; 5 x green, 5 x blue, and 5 x Red running in three colour rows down the length of the board.\u003c\/li\u003e\n\u003cli\u003eIt has been designed such that it is within the supply rating of a computer USB port (under 100mA).\u003c\/li\u003e\n\u003cli\u003eThe PCB is approximately 75mm long, 17mm wide.\u003c\/li\u003e\n\u003cli\u003eThere are two M3 mounting holes.\u003c\/li\u003e\n\u003cli\u003eThe LEDs are controlled by an onboard on\/off switch, there are also pads to allow you to connect a remote switch.\u003c\/li\u003e\n\u003cli\u003ePower is supplied to the board via a Micro USB power connector.\u003c\/li\u003e\n\u003cli\u003eThe board also features power pads to allow for powering via a non-USB power source.\u003c\/li\u003e\n\u003cli\u003eOne remote on\/off switch can be used to multiple boards simultaneously.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Kitronik TriColour LED board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 75mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 17mm.\u003c\/li\u003e\n\u003cli\u003eMax Height: 7mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEither;\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e1 x USB Power Lead. Or;\u003c\/li\u003e\n\u003cli\u003e1 x USB Power Supply.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/resources.kitronik.co.uk\/pdf\/35164-kitronik-tricolour-led-strip-datsheet.pdf\" target=\"_blank\"\u003eDatasheet.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/resources.kitronik.co.uk\/zip\/3mm-persex-edge-template-dxf.zip\" target=\"_blank\"\u003e3mm Perspex\/Acrylic edge template.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/kitronik.co.uk\/blogs\/resources\/edge-lit-colour-mixing-diagram-kitronik-tricolour-led-board\" target=\"_blank\"\u003eMake an edge-lit-colour mixing diagram.\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":40484738760787,"sku":"KIT-35164","price":3.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/35164_large-kitronik-tri-colour-led-board-illuminated.jpg?v=1673430298","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/kitronik-tricolour-led-board","provider":"Pimoroni Ltd","version":"1.0","type":"link"}