{"product_id":"kitronik-simply-servos-board-for-raspberry-pi-pico","title":"Kitronik Simply Servos Board for Raspberry Pi Pico","description":"\u003cp\u003eMake the RiPi Pico the brains of your next robotics project with the Kitronik Simply Servos for Raspberry Pi Pico.\u003c\/p\u003e\n\u003cp\u003eThe compact Simply Servo board for Raspberry Pi Pico allows for up to 8 servos to be controlled simultaneously, making it ideal for advanced robotics projects with the RiPi Pico. The board should be used with a Pico that has soldered pin headers, the Pico can then slot straight into the board. A Pico with pin headers already attached can be obtained separately here. The board features standard 3-pin servo connectors which allow for servos to be plugged straight in without the need for adaptors or soldering.\u003c\/p\u003e\n\u003cp\u003eAs well as supporting 8 servos, the board also features 5 external connections to GPIO pins and a 3V and GND supply from the Pico. This IO breakout the 3 ADC pins and GP0 and GP1. This allows additional IO to be connected to the board and the state of these can then be read or controlled by the Pico.\u003c\/p\u003e\n\u003cp\u003ePower is provided via a terminal block connector, the supply is then controlled by an on\/off power switch to the board. There is a green power LED to indicate when the board is turned on. The board produces a regulated 3V supply that is fed into the 40-way connector to power the Pico, removing the need to power the Pico directly. The board's power connections are reverse polarity protected.\u003c\/p\u003e\n\u003cp\u003eTo support the board, Kitronik has developed a MicroPython module and sample code for controlling servos with the Pico. This code is available in the \u003ca href=\"https:\/\/github.com\/KitronikLtd\/Kitronik%20Pico%20Simply%20Servos%20MicroPython\" target=\"_blank\"\u003eGitHub repo here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis board is not supplied with a Raspberry Pi Pico, one can be obtained separately \u003ca href=\"\/en-eu\/products\/raspberry-pi-pico\" target=\"_blank\"\u003ehere.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThis board is capable of continuous use at high currents. During such use, it may become hot.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eControl up 8 servos simultaneously with the Raspberry Pi Pico.\u003c\/li\u003e\n\u003cli\u003eAmple IO for advanced robotics projects.\u003c\/li\u003e\n\u003cli\u003eThe board features standard 3 pin servo connectors.\u003c\/li\u003e\n\u003cli\u003eThe board also features 5 external connections to GPIO pins and a 3V and GND supply from the Pico. These IO breakout the 3 ADC pins and GP0 and GP1.\u003c\/li\u003e\n\u003cli\u003eThe board features a terminal block power input connector, with on\/off switch and power status LED.\u003c\/li\u003e\n\u003cli\u003eThe board will power all of the attached servos and provide the attached Pico with a regulated 3V supply.\u003c\/li\u003e\n\u003cli\u003eAdditionally, there is built-in reverse polarity protection.\u003c\/li\u003e\n\u003cli\u003eKitronik has developed a MicroPython module \u0026amp; sample code.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Simply Servos for Raspberry Pi Pico.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 65mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 36mm.\u003c\/li\u003e\n\u003cli\u003eHeight: 14mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/KitronikLtd\/Kitronik-Pico-Simply-Servos-MicroPython\" target=\"_blank\"\u003eMicroPython module and sample code GitHub Repo.\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/resources.kitronik.co.uk\/pdf\/5339-kitronik-simply-servos-raspberry-pi-pico-datashseet.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":39828277330003,"sku":"KIT-5339","price":8.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5339_press-1-kitronik-simply-servos-raspberry-pi-pico.jpg?v=1648828550","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/kitronik-simply-servos-board-for-raspberry-pi-pico","provider":"Pimoroni Ltd","version":"1.0","type":"link"}