{"product_id":"adafruit-voice-bonnet-for-raspberry-pi-two-speakers-two-mics","title":"Adafruit Voice Bonnet for Raspberry Pi - Two Speakers + Two Mics","description":"\u003cp\u003eYour Raspberry Pi computer is like an electronic brain - and with the Adafruit Voice Bonnet you can give it a mouth and ears as well!\u003c\/p\u003e\n\u003cp\u003eFeaturing two built in microphones and two 1 Watt speaker outputs using a high quality I2S codec, this Pi add-on will work with any Raspberry Pi with a 2x20 connector - from the Pi Zero up to the Pi 4 and beyond (basically all but the very first ones made).\u003c\/p\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/www.cirrus.com\/products\/wm8960\/\" data-mce-href=\"https:\/\/www.cirrus.com\/products\/wm8960\/\" target=\"_blank\"\u003eon-board WM8960 codec uses I2S digital audio for great quality recording and playback\u003c\/a\u003e - so it sounds a lot better than the headphone jack on the Pi (or the no-headphone jack on a Pi Zero). Adafruit put ferrite beads and filter capacitors on every input and output to get the best possible performance, and all at a great price.\u003c\/p\u003e\n\u003cp\u003eThey specifically designed this bonnet for use with making machine learning projects such as DIY voice assistants - \u003ca href=\"https:\/\/learn.adafruit.com\/using-google-assistant-on-the-braincraft-hat\" data-mce-href=\"https:\/\/learn.adafruit.com\/using-google-assistant-on-the-braincraft-hat\" target=\"_blank\"\u003efor example see this guide on creating a DIY Google Assistant.\u003c\/a\u003e But you could do various voice activated or voice recognition projects. With two microphones, basic voice position can be detected as well.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.cirrus.com\/products\/wm8960\/\" data-mce-href=\"https:\/\/www.cirrus.com\/products\/wm8960\/\" target=\"_blank\"\u003e\u003cstrong\u003eWM8960 codec\u003c\/strong\u003e uses I2S digital audio for both input and output\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn\/Off privacy switch to deactivate audio\u003c\/strong\u003e so you know it can't be recording.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo built in analog microphone inputs\u003c\/strong\u003e (left and right)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eTwo 1W speaker outputs (speakers not included)\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e3.5mm stereo headphone or line-out audio\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlugs into any Raspberry Pi\u003c\/strong\u003e with 2x20 headers\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWith the extra space on the PCB they also added some bonus extras!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePush button\u003c\/strong\u003e - Use to change modes, activate the voice assistant, anything you like!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree DotStar RGB LEDs\u003c\/strong\u003e - add LED feedback or make a rainbow light show\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTEMMA QT connector\u003c\/strong\u003e - \u003ca href=\"\/en-eu\/collections\/stemma-qt\" target=\"_blank\" data-mce-href=\"\/en-eu\/collections\/stemma-qt\"\u003eplug in any of our STEMMA QT I2C sensors, OLEDs, or accessories.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e3 Pin JST STEMMA connector\u003c\/strong\u003e - for larger accessories, like NeoPixels, a relay or servo\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eNo assembly required! Simply pop it onto your Pi and install the microphone\/speaker card using the installer script. Your Pi will then have stereo input and output for use in any software - they appear as any other speaker\/mic would. Play music or record audio with ease. For audio input, the two microphones are built into the Bonnet. For audio output, you can either use the Line-out\/Headphone 3.5mm stereo jack or you can plug in one or two speakers. For DIY speakers, solder any 1W+ speaker to a \u003ca href=\"https:\/\/shop.pimoroni.com\/products\/jst-2-wire-assembly\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eJST 2-PH cable\u003c\/a\u003e. If you'd like to stack another HAT or bonnet on top, use a 2x20 stacking header to feed through the 2x20 connector.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cp\u003eProduct Dimensions: 65.2mm x 33.3mm x 11.0mm \/ 2.6\" x 1.3\" x 0.4\"\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 6.0g \/ 0.2oz\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":32283951104083,"sku":"ADA4757","price":24.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/4757-03.jpg?v=1603362913","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/adafruit-voice-bonnet-for-raspberry-pi-two-speakers-two-mics","provider":"Pimoroni Ltd","version":"1.0","type":"link"}