{"product_id":"adafruit-monster-m4sk-diy-electronic-eyes-mask","title":"Adafruit MONSTER M4SK - DIY Electronic Eyes Mask","description":"\u003cp\u003e\u003cstrong\u003ePeep dis!\u003c\/strong\u003e Have you always wanted to have another pair of eyes on the back of your head? Or outfit your costume with big beautiful orbs?\u003c\/p\u003e\n\u003cp\u003eThe MONSTER M4SK \u003ca href=\"\/en-eu\/products\/adafruit-hallowing-m0-express\" target=\"_blank\"\u003eis like the Hallowing\u003c\/a\u003e but \u003cem\u003etwice\u003c\/em\u003e as good, with two gorgeous 240x240 pixel IPS TFT displays, driven by a 120MHZ Cortex M4 processor that can pump out those pixels super fast. \u003ca href=\"\/en-eu\/products\/adafruit-animated-eyes-bonnet-for-raspberry-pi-mini-kit-without-displays\" target=\"_blank\"\u003eYou'll get the same quality display as the Raspberry Pi Eyes kit but without needing to tote around a full Linux computer\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis unique design has the eyes at the same pupil-distance as a human (~63mm) but is designed so that the nose section can be broken apart with pliers\/cutters and then wired together with a 9-pin JST SH cable up to 100mm long so the eyes can be re-positioned or freely attached.\u003c\/p\u003e\n\u003cp\u003eAdafruit wanted to make audio-effects easier so in addition to a class D audio amp, there's also a stereo headphone jack that is connected to the two DACs on the chip. Use it when you want an externally sound amplifier box for big effects. For small portable effects, the built-in amp can drive 8 ohm speakers up to 1 Watt.\u003c\/p\u003e\n\u003cp\u003eOn each side are JST-PH plugs for connecting external devices. The 3-pin JSTs connect to analog\/timer pins on the SAMD51, so you can use them for sensors or GPIO devices. The 4-pin JST connector connects to the I2C port and you can fit Grove connectors in it for additional hardware support. For the PDM mic port, you can wire to a \u003ca href=\"\/en-eu\/products\/adafruit-pdm-mems-microphone-breakout\" target=\"_blank\"\u003ePDM mic\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThere's also plenty of sensors built in - light sensor, 3 tactile buttons, and a capacitive touch pad on the nose.\u003c\/p\u003e\n\u003cp\u003eSpeaking of that nose, \u003ca href=\"http:\/\/missmonster.com\/\" target=\"_blank\"\u003ethe silkscreen is by the skillful Miss Monster, check out those fangs!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThis is by far the cutest, creepiest and most incredible development board Adafruit have made so far! \u003cem\u003eGaze upon these features:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eATSAMD51G19 Cortex M4 microcontroller running at 120MHz with 512KB Flash, 192KB RAM\u003c\/li\u003e\n\u003cli\u003e8 MB QSPI flash for storing graphics and sound effects\u003c\/li\u003e\n\u003cli\u003eTwo 240x240 IPS TFT displays each on their own SPI bus\u003c\/li\u003e\n\u003cli\u003eBeautiful silkscreen with a boop-able nose that is a capacitive touch pad\u003c\/li\u003e\n\u003cli\u003eLipoly battery charge circuit for portable use\u003c\/li\u003e\n\u003cli\u003eStereo headphone jack out, for sound effects via an amplifier\u003c\/li\u003e\n\u003cli\u003eMono speaker driver for smaller 8 ohm 1W speakers\u003c\/li\u003e\n\u003cli\u003eOne 4 pin STEMMA JST connector for I2C connection (also Grove compatible)\u003c\/li\u003e\n\u003cli\u003eTwo 3 pin STEMMA JST connectors with digital\/analog\/PWM for servos, sensors, etc\u003c\/li\u003e\n\u003cli\u003eOne 4 pin JST SH port for connecting an optional PDM microphone\u003c\/li\u003e\n\u003cli\u003eBacklight controls\u003c\/li\u003e\n\u003cli\u003eThree tactile buttons\u003c\/li\u003e\n\u003cli\u003eLight sensor\u003c\/li\u003e\n\u003cli\u003eOn\/Off Switch and reset button\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAnd as you can expect, they've got some great new eyeball code, which does 2 eyes with user-configurable graphics. Right now their code support is only for Arduino - CircuitPython isn't quite fast enough to do the 3D animation techniques used to draw the eyeballs. \u003ca href=\"\/en-eu\/?q=lens%2040mm\" target=\"_blank\"\u003eThe eyes look \u003cem\u003eeven better\u003c\/em\u003e if you pair them with these 40mm glass or plastic lenses. (You'll need two of course)\u003c\/a\u003e You might also need \u003ca href=\"https:\/\/shop.pimoroni.com\/products\/clear-acrylics-and-hardware-kit-for-monster-m4sk\" target=\"_blank\"\u003ethis clear acrylic kit\u003c\/a\u003e to mount the convex lenses.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Dimensions: 118.3mm x 48.0mm x 9.7mm \/ 4.7\" x 1.9\" x 0.4\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLEARN\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-monster-m4sk-eyes\" target=\"_blank\"\u003ePrimary Guide: Adafruit MONSTER M4SK\u003c\/a\u003e - Our easiest animated eyes yet!\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/customeyesation-diy-monster-m4sk-graphics\" target=\"_blank\"\u003eCustomEyesation: DIY Monster M4SK Graphics\u003c\/a\u003e - How to create your own texture maps for the M4SK Eyes\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/add-monster-m4sk-to-your-costume-mask\" target=\"_blank\"\u003eAdd MONSTER M4SK to your Costume Mask\u003c\/a\u003e - Bring your costume mask to life with eyes that seem alive!\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/wide-set-monster-m4sk-creature-eyes\" target=\"_blank\"\u003eFish Head MONSTER M4SK Eyes\u003c\/a\u003e - Detatch the two halves of the MONSTER M4SK for flexible screen placement on wide set creature heads!\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/4343\/guides\" target=\"_blank\"\u003eSee all guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":30926383644755,"sku":"ADA4343","price":43.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/4343-07.jpg?v=1653319895","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/adafruit-monster-m4sk-diy-electronic-eyes-mask","provider":"Pimoroni Ltd","version":"1.0","type":"link"}