{"product_id":"adafruit-funhouse-wifi-home-automation-development-board","title":"Adafruit FunHouse - WiFi Home Automation Development Board","description":"\u003cp\u003eHome is where the heart is...it's also where we keep all our electronic bits. So why not wire it up with sensors and actuators to turn our house into an electronic wonderland.\u003c\/p\u003e\n\u003cp\u003eWhether it's tracking the environmental temperature and humidity in your laundry room, or notifying you when someone is detected in the kitchen, to sensing when a window was left open, or logging when your cat leaves through the pet door, this board is designed to make it way easy to make WiFi-connected home automation projects.\u003c\/p\u003e\n\u003cp\u003eThe main processor is the ESP32-S2, which has the advantage of the low cost and power of the ESP32 with the flexibility of CircuitPython support thanks to native USB support. There's also Arduino support for this chip, and many existing ESP32 projects seem to run as-is. Note this chip does not have BLE support, but for WiFi projects its great. You can use it to connect to IoT services or just the Internet in general, with SSL support and this module has plenty of PSRAM for any kind of data processing.\u003c\/p\u003e\n\u003cp\u003eThe board is designed to make it easy to wire up sensors with little or no soldering. There are built in sensors for light, pressure, humidity and temperature sensors. Three JST PH plugs allow for quick connection of STEMMA boards that use digital or analog I\/O, and there's a \u003ca href=\"\/en-eu\/collections\/stemma-qt\" target=\"_blank\"\u003eSTEMMA QT port for any I2C devices.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eHere's what is included on this development board:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S2 240MHz Tensilica processor\u003c\/strong\u003e - the next generation of ESP32, now with native USB so it can act like a keyboard\/mouse, MIDI device, disk drive, etc!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWROVER module\u003c\/strong\u003e has FCC\/CE certification and comes with 4 MByte of Flash and 2 MByte of PSRAM - you can have huge data buffers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1.54\" Color TFT display with 240x240 pixels.\u003c\/strong\u003e This petite display is one of our favorites, with SPI interface and a controllable backlight.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB C\u003c\/strong\u003e power and data connector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFive mini RGB DotStar LEDs\u003c\/strong\u003e on the top, for animations or easily-visible notification\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree buttons\u003c\/strong\u003e can be used to wake up the ESP32 from deep-sleep, or select different modes\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/adafruit-dps310-precision-barometric-pressure-altitude-sensor-stemma-qt-qwiic\" target=\"_blank\"\u003eDPS310\u003c\/a\u003e barometric pressure and temperature sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/adafruit-aht20-temperature-humidity-sensor-breakout-board-stemma-qt-qwiic\" target=\"_blank\"\u003eAHT20\u003c\/a\u003e relative humidity and temperature sensor\u003c\/li\u003e\n\u003cli\u003ePlug in socket for \u003cstrong\u003eMini PIR sensor\u003c\/strong\u003e (not included)\u003c\/li\u003e\n\u003cli\u003eFront facing \u003cstrong\u003elight sensor\u003c\/strong\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSpeaker\/Buzzer\u003c\/strong\u003e can play tones and beeps for audible notification.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTEMMA QT\u003c\/strong\u003e port for attaching \u003ca href=\"\/en-eu\/collections\/stemma-qt\" target=\"_blank\"\u003eall sorts of I2C devices\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eThree \u003cstrong\u003eSTEMMA 3 pin JST\u003c\/strong\u003e connectors for attaching NeoPixels, speakers, servos or relays.\u003c\/li\u003e\n\u003cli\u003eThree \u003cstrong\u003ecapacitive touch pads\u003c\/strong\u003e and one\u003cstrong\u003e capacitive touch slider\u003c\/strong\u003e with 5 elements.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eOn\/Off switch\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoot\u003c\/strong\u003e and \u003cstrong\u003eReset buttons\u003c\/strong\u003e for re-programming\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eOverall length: 85mm\u003c\/li\u003e\n\u003cli\u003eWidth: 56mm\u003c\/li\u003e\n\u003cli\u003eHeight: 10.8mm\u003c\/li\u003e\n\u003cli\u003eWeight: 26.6g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLEARN\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-funhouse\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePrimary Guide: Adafruit FunHouse\u003c\/a\u003e - WiFi connected home automation projects made easy!\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/using-the-adafruit-funhouse-with-home-assistant\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUsing the Adafruit FunHouse with Home Assistant\u003c\/a\u003e - Use the full power of the FunHouse with Home assistant\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/funhouse-door-alert-email-notification\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFunhouse Door Alert with Email Notification\u003c\/a\u003e - Build a WiFi home automation system that sends a message when your door is ajar!\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/creating-funhouse-projects-with-circuitpython\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eCreating FunHouse Projects with CircuitPython\u003c\/a\u003e - The FunHouse library makes it very easy to create connected, home automation projects with a display and plenty of inputs\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/4985\/guides\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSee all Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":39374760804435,"sku":"ADA4985","price":34.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/4985-06.jpg?v=1624006232","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/adafruit-funhouse-wifi-home-automation-development-board","provider":"Pimoroni Ltd","version":"1.0","type":"link"}