{"product_id":"adafruit-feather-m0-rfm69hcw-packet-radio-868-or-915-mhz-radiofruit","title":"Adafruit Feather M0 RFM69HCW Packet Radio - 868 or 915 MHz - RadioFruit","description":"\u003cp\u003eThis is the\u003cstrong\u003e Adafruit Feather M0 RFM69 Packet Radio (868 or 915 MHz)\u003c\/strong\u003e\u003cstrong\u003e.\u003c\/strong\u003e They're called \u003cem\u003eRadioFruits\u003cstrong\u003e,\u003c\/strong\u003e\u003c\/em\u003e Adafruits take on an microcontroller with a RFM69HCW packet radio transceiver plus built in USB and battery charging. Its an Adafruit Feather M0 with a 900MHz radio module cooked in!\u003c\/p\u003e\n\u003cp\u003eFeather is the new development board from Adafruit, and like its namesake it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. \u003ca target=\"_blank\" href=\"\/en-eu\/collections\/feather\" rel=\"noopener noreferrer\"\u003eWe have other boards in the Feather family, check'em out here.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the 900 MHz radio version, which can be used for either 868MHz or 915MHz transmission\/reception\u003c\/strong\u003e - the exact radio frequency is determined when you load the software since it can be tuned around dynamically. \u003ca target=\"_blank\" href=\"\/en-eu\/products\/adafruit-feather-m0-rfm69-packet-radio\" rel=\"noopener noreferrer\"\u003eWe also sell a 433 MHz version of the same radio chipset!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eAt the Feather M0's heart is an ATSAMD21G18 ARM Cortex M0 processor, clocked at 48 MHz and at 3.3V logic, the same one used in the new Arduino Zero. This chip has a whopping 256K of FLASH (8x more than the Atmega328 or 32u4) and 32K of RAM (16x as much)! This chip comes with built in USB so it has USB-to-Serial program \u0026amp; debug capability built in with no need for an FTDI-like chip.\u003c\/p\u003e\n\u003cp\u003eTo make it easy to use for portable projects, Adafruit added a connector for any of our 3.7V Lithium polymer batteries and built in battery charging. You don't need a battery, it will run just fine straight from the micro USB connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when its available. They also tied the battery thru a divider to an analog pin, so you can measure and monitor the battery voltage to detect when you need a recharge.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHere's some handy specs! Like all Feather M0's you get:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures 2.0\" x 0.9\" x 0.3\" (51mm x 23mm x 8mm) without headers soldered in\u003c\/li\u003e\n\u003cli\u003eLight as a (large?) feather - 5.8 grams\u003c\/li\u003e\n\u003cli\u003eATSAMD21G18 @ 48MHz with 3.3V logic\/power\u003c\/li\u003e\n\u003cli\u003eNo EEPROM\u003c\/li\u003e\n\u003cli\u003e3.3V regulator with 500mA peak current outpu0t\u003c\/li\u003e\n\u003cli\u003eUSB native support, comes with USB bootloader and serial port debugging\u003c\/li\u003e\n\u003cli\u003eYou also get tons of pins - 20 GPIO pins\u003c\/li\u003e\n\u003cli\u003eHardware Serial, hardware I2C, hardware SPI support\u003c\/li\u003e\n\u003cli\u003e8 x PWM pins\u003c\/li\u003e\n\u003cli\u003e10 x analog inputs\u003c\/li\u003e\n\u003cli\u003e1 x analog output\u003c\/li\u003e\n\u003cli\u003eBuilt in 100mA lipoly charger with charging status indicator LED\u003c\/li\u003e\n\u003cli\u003ePin #13 red LED for general purpose blinking\u003c\/li\u003e\n\u003cli\u003ePower\/enable pin\u003c\/li\u003e\n\u003cli\u003e4 mounting holes\u003c\/li\u003e\n\u003cli\u003eReset button\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe \u003cstrong\u003eFeather M0 Radio\u003c\/strong\u003e uses the extra space left over to add an RFM69HCW 433 or 900MHz radio module. These radios are not good for transmitting audio or video, but they do work quite well for small data packet transmission when you need more range than 2.4 GHz (BT, BLE, WiFi, ZigBee)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSX1231 based module with SPI interface\u003c\/li\u003e\n\u003cli\u003ePacket radio with ready-to-go Arduino libraries\u003c\/li\u003e\n\u003cli\u003eUses the license-free ISM band (\"European ISM\" @ 868MHz or \"American ISM\" @ 915MHz)\u003c\/li\u003e\n\u003cli\u003e+13 to +20 dBm up to 100 mW Power Output Capability (power output selectable in software)\u003c\/li\u003e\n\u003cli\u003e50mA (+13 dBm) to 150mA (+20dBm) current draw for transmissions\u003c\/li\u003e\n\u003cli\u003eRange of approx. 350 meters, depending on obstructions, frequency, antenna and power output\u003c\/li\u003e\n\u003cli\u003eCreate multipoint networks with individual node addresses\u003c\/li\u003e\n\u003cli\u003eEncrypted packet engine with AES-128\u003c\/li\u003e\n\u003cli\u003eSimple wire antenna or spot for uFL connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComes fully assembled and tested, with a USB bootloader that lets you quickly use it with the Arduino IDE. We also toss in some headers so you can solder it in and plug into a solderless breadboard. You will need to cut and solder on a small piece of wire (any solid or stranded core is fine) in order to create your antenna. Lipoly battery and USB cable not included but we do have lots of options in the shop if you'd like!\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-feather-m0-radio-with-rfm69-packet-radio\/downloads\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eEagleCAD, Fritzing and datasheet available in the product tutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e51mm x 23mm x 8mm \/ 2.0\" x 0.9\" x 0.28\"\u003c\/li\u003e\n\u003cli\u003eWeight: 5.6g\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":3076794089482,"sku":"ADA3176","price":24.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/3176-00.jpg?v=1524838590","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/adafruit-feather-m0-rfm69hcw-packet-radio-868-or-915-mhz-radiofruit","provider":"Pimoroni Ltd","version":"1.0","type":"link"}