{"product_id":"adafruit-esp32-s3-tft-feather-4mb-flash-2mb-psram-stemma-qt","title":"Adafruit ESP32-S3 TFT Feather (4MB Flash\/2MB PSRAM)","description":"\u003cp\u003eAn ESP32-\u003cem\u003eS3\u003c\/em\u003e Feather board with a built in IPS TFT color display. It's got all the features of a Feather main board, the comforting warmth of an ESP32-S3 WiFi+BLE microcontroller, and the crispness of a 240x135 pixel color TFT display.\u003c\/p\u003e\n\u003cp\u003eAll that and it will even plug in nicely into a breadboard, \u003ca href=\"\/en-eu\/products\/terminal-block-breakout-featherwing-kit-for-all-feather-boards\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eterminal block wing\u003c\/a\u003e, or \u003ca href=\"\/en-eu\/products\/featherwing-doubler-prototyping-add-on-for-all-feather-boards\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eFeather Doubler\u003c\/a\u003e or even just stack on top of another wing.\u003c\/p\u003e\n\u003cp\u003eThis Feather comes with native USB and \u003cstrong\u003e4 MB Flash + 2 MB of PSRAM\u003c\/strong\u003e, so it is perfect for use with CircuitPython or Arduino with low-cost WiFi. Native USB means it can act like a keyboard or a disk drive. WiFi means it's awesome for IoT projects. And Feather means it works with the large community of Feather Wings for expandability.\u003c\/p\u003e\n\u003cp\u003eThe ESP32-S3 is a highly-integrated, low-power, 2.4 GHz Wi-Fi\/BLE System-on-Chip (SoC) solution that has built-in native USB as well as some other interesting new technologies like Time of Flight distance measurements and AI acceleration. With its state-of-the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the Internet of Things (IoT), wearable electronics, and smart homes.\u003c\/p\u003e\n\u003cp\u003eThe Feather ESP32-S3 has a dual-core 240 MHz chip, so it is comparable to ESP32's dual-core. However, there is no Bluetooth Classic support, only Bluetooth LE. This chip is a great step up from the earlier ESP32-S2! This ESP32-S3 mini-module used on the Feather comes with 4 MB flash and 2 MB PSRAM, as well as lots of 512KB of SRAM so it's perfect for use with CircuitPython support or any time massive buffers are needed: for fast memory access use SRAM, for slower-but-roomier access use PSRAM. It's also great for use in ESP-IDF or with Arduino support.\u003c\/p\u003e\n\u003cp\u003eThe color TFT is connected to the SPI pins and uses additional pins for control that are not exposed to the breakout pads. \u003ca href=\"\/en-eu\/products\/adafruit-1-14-240x135-color-tft-display-microsd-card-breakout-st7789\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eIt's the same display as you see here\u003c\/a\u003e, with 240x135 pixels and is IPS so you get bright color at any angle. The backlight is also connected to a separate pin so you can PWM the backlight up and down as desired.\u003c\/p\u003e\n\u003cp\u003eFor low power usages, the Feather has a \u003cem\u003esecond\u003c\/em\u003e low-dropout 3.3V regulator. The regulator is controlled with a GPIO pin on the enable line and can shut off power to the Stemma QT port and TFT. There is also a separate power pin for the NeoPixel that can be used to disable it for even lower quiescent power. With everything off and in deep sleep mode, the TFT feather uses about 100uA of current.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S3 Dual Core 240MHz Tensilica processor\u003c\/strong\u003e - the next generation of ESP32-Sx, with native USB so it can act like a keyboard\/mouse, MIDI device, disk drive, etc!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini module\u003c\/strong\u003e has FCC\/CE certification and comes with 4 MByte of Flash and 2 MByte of PSRAM - you can have huge data buffers\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/adafruit-1-14-240x135-color-tft-display-microsd-card-breakout-st7789\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eColor 1.14\" IPS TFT with 240x135 pixels\u003c\/a\u003e - bright and colorful display with ST7789 chipset that can be viewed at any angle angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower options\u003c\/strong\u003e - USB type C \u003cstrong\u003eor\u003c\/strong\u003e Lipoly battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in battery charging\u003c\/strong\u003e when powered over USB-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiPoly battery monitor\u003c\/strong\u003e - LC709203 chip actively monitors your battery for voltage and state of charge \/ percentage reporting over I2C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReset and DFU\u003c\/strong\u003e (BOOT0) buttons to get into the ROM bootloader (which is a USB serial port so you don't need a separate cable!)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial debug output pin\u003c\/strong\u003e (optional, for checking the hardware serial debug console)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/collections\/stemma-qt\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eSTEMMA QT\u003c\/a\u003e connector for I2C devices, with switchable power, so you can go into low power mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn\/Charge\/User\u003c\/strong\u003e LEDs + status \u003cstrong\u003eNeoPixel\u003c\/strong\u003e with pin-controlled power for low power usage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Power friendly!\u003c\/strong\u003e In deep sleep mode, we can get down to 80~100uA of current draw from the Lipoly connection. Quiescent current is from the power regulator, ESP32-S2 chip, and Lipoly monitor. Turn off the NeoPixel and external I2C\/TFT power for the lowest quiescent current draw.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWorks with Arduino or CircuitPython\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003eProduct Dimensions: 52.5mm x 22.8mm x 9.5mm \/ 2.1\" x 0.9\" x 0.4\"\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 8.2g \/ 0.3oz\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/5483\/esp32-s3_datasheet_en.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eESP32-S3 Series Datasheet\u003c\/a\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":40032190857299,"sku":"ADA5483","price":24.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5483-06.jpg?v=1655302176","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/adafruit-esp32-s3-tft-feather-4mb-flash-2mb-psram-stemma-qt","provider":"Pimoroni Ltd","version":"1.0","type":"link"}