{"product_id":"adafruit-16-channel-pwm-servo-hat-for-raspberry-pi-mini-kit","title":"Adafruit 16-Channel PWM \/ Servo HAT for Raspberry Pi - Mini Kit","description":"\u003cp\u003eThe Raspberry Pi is a wonderful little computer, but one thing it isn't very good at is controlling DC Servo Motors - these motors need very specific and repetitive timing pulses to set the position. Instead of asking the Pi Linux kernel to send these signals, pop on this handy HAT!\u003c\/p\u003e\n\u003cp\u003eIt adds the capability to control 16 Servos with perfect timing. It can also do PWM up to 1.6 KHz with 12 bit precision, all completely free-running.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFor use with Raspberry Pi Model Zero, A+, B+, Pi 2, Pi 3, or Pi 4 (any Pi with 2x20 header)\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Adafruit 16-Channel 12-bit PWM\/Servo HAT will drive up to 16 servos or PWM outputs over I2C with only 2 pins. The on-board PWM controller will drive all 16 channels simultaneously with no additional Raspberry Pi processing overhead. What's more, you can stack up to 62 of them to control up to 992 servos - all with the same 2 pins!\u003c\/p\u003e\n\u003cp\u003eWorks with any servo that can be powered by 5V and take 3.3V logic level signals.\u003c\/p\u003e\n\u003cp\u003eBest of all, Adafruit even have a Python library you can use, so you'll be up and running instantly, to make your robotic creation come to life. The Adafruit PWM\/Servo HAT is the perfect solution for any project that requires a lot of servos or PWM outputs! \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-16-channel-pwm-servo-hat-for-raspberry-pi\/\" target=\"_blank\"\u003ePlease check out the detailed tutorial for lots more information including diagrams, schematics, installation instructions and more\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eEach order comes with a Servo HAT, a 2-pin terminal block, four 3x4 headers and a 2x20 socket header. You'll need to do some light through-hole soldering to attach the headers onto the HAT circuit board, but its easy to do with basic soldering tools like a soldering iron and rosin core electronics solder. If you would like to stack multiple HATs onto one Pi, you can also pick up a 2x20 stacking header and a set of right-angle 3x4 headers that should be soldered on instead.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note!\u003c\/strong\u003e \u003cstrong\u003eThis kit does not come with Raspberry Pi, servos, or required 5V power supply.\u003c\/strong\u003e Also, the terminal blocks included with your product may be blue or black.\u003c\/p\u003e\n\u003ch2\u003eTECHNICAL DETAILS\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDimensions w\/ components: 65mm x 56mm x 13mm \/ 2.6\" x 2.2\" x 0.5\"\u003c\/li\u003e\n\u003cli\u003eWeight (unsoldered HAT only): 14g \/ 0.03 lbs.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-16-channel-pwm-servo-hat-for-raspberry-pi\/downloads\" target=\"_blank\"\u003eDatasheet, schematic, PCB files, and Fritzing object available from the product tutorial\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRevision History:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of December 14, 2022\u003c\/strong\u003e – Adafruit have updated this PCB with \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_Pinguin\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eAdafruit Pinguin\u003c\/a\u003e to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eLEARN\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-16-channel-pwm-servo-hat-for-raspberry-pi\" target=\"_blank\"\u003eAdafruit 16-Channel PWM\/Servo HAT \u0026amp; Bonnet for Raspberry Pi\u003c\/a\u003e - 16 channels of servo-bustin' power for your Pi\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":1038409565,"sku":"ADA2327","price":17.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/2327-13_db412664-c561-4f24-9159-2b18f3dd45e4.jpg?v=1646663750","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/adafruit-16-channel-pwm-servo-hat-for-raspberry-pi-mini-kit","provider":"Pimoroni Ltd","version":"1.0","type":"link"}