{"product_id":"5m-flexible-rgb-led-wire-50-rgb-leds-aka-neopixel-ws2812-sk6812","title":"5m Flexible RGB LED Wire (50 lights)","description":"\u003cp\u003eThis attractive, individually-addressable (NeoPixel compatible) RGB LED wire is perfect for making your own programmable fairy lights. 🌈\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5 metres long with 50 individually addressable LEDs\u003c\/li\u003e\n\u003cli\u003eWS2812B\/NeoPixel-compatible\u003c\/li\u003e\n\u003cli\u003eSnazzy silver coloured wire\u003c\/li\u003e\n\u003cli\u003eSuper-flexible and thin, ideal for tight spaces\u003c\/li\u003e\n\u003cli\u003eTinned wires on one end for attaching to screw terminals\u003c\/li\u003e\n\u003cli\u003eDust\/water resistant*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAddressable LEDs let you individually set each LED in the chain to a specific RGB colour by sending signals from a microcontroller. If you're looking for an easy, plug and play LED controller check out \u003ca href=\"\/en-eu\/products\/plasma-2040\" target=\"_blank\"\u003ePlasma 2040\u003c\/a\u003e or \u003ca href=\"\/en-eu\/products\/plasma-stick-2040-w\" target=\"_blank\"\u003ePlasma Stick\u003c\/a\u003e - just connect up the tinned wires to the screw terminals, apply USB power and you're ready to start making rainbows!\u003c\/p\u003e\n\u003cp\u003eAlternatively, you could use a Raspberry Pi, Arduino, micro:bit, or other microcontroller to drive them - there are loads of different code libraries available (Python, MicroPython, CircuitPython, Arduino, and more).\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLED model: WS2812B-4040\u003c\/li\u003e\n\u003cli\u003eWire: 3P flexible wire (7×0.16mm tinned copper\/transparent PVC\/OD1.1×3.7)\u003c\/li\u003e\n\u003cli\u003eDiffuser: LEDs and solder joints set in epoxy resin\u003c\/li\u003e\n\u003cli\u003eIP67 dust\/water resistant*\u003c\/li\u003e\n\u003cli\u003eData-in end: 30cm tail ending in tinned wires\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eData-out end: sealed with a blob of glue**\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 3.7-5.3 VDD\u003c\/li\u003e\n\u003cli\u003eMaximum Output Power: 0.24W\/LED (at 5V)\u003c\/li\u003e\n\u003cli\u003eCable length: 5m (plus a 30cm tail)\u003c\/li\u003e\n\u003cli\u003eEmitted Color: RGB\u003c\/li\u003e\n\u003cli\u003eLED Quantity: 10 LEDs\/m (50 LEDs total)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePinout\u003c\/h2\u003e\n\u003cp\u003eThe 5V \/ + \/ VCC wire on these LEDs is the one marked with dots. The DATA \/ PIXELS wire is the one in the middle, and the GROUND \/ - wire is the one on the other edge (that doesn't have dots).\u003c\/p\u003e\n\u003cp\u003eNote that the colour order of these LEDs is RGB, you may need to specify this in your code.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e* The LED wire is IP67 rated, which means it should stand up to modest outdoor use. Make sure your controller is kept inside or suitably protected from the elements!\u003c\/li\u003e\n\u003cli\u003e** There's no connector on the data-out end of this strip, but you could snip the end and solder multiple sets together if you wanted.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"50 LEDs (100mm LED spacing)","offer_id":40384556171347,"sku":"COM3214","price":11.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/ledwire.jpg?v=1669656866","url":"https:\/\/shop.pimoroni.com\/en-eu\/products\/5m-flexible-rgb-led-wire-50-rgb-leds-aka-neopixel-ws2812-sk6812","provider":"Pimoroni Ltd","version":"1.0","type":"link"}