{"title":"New Products","description":"The latest and greatest products from Pimoroni, Raspberry Pi, Adafruit, Sparkfun, and more - get the hottest new Maker products at Pimoroni!","products":[{"product_id":"adafruit-eink-breakout-friend-with-32kb-sram","title":"Adafruit eInk Breakout Friend with 32KB SRAM","description":"\u003cp\u003eAdd some bi-stability to your life with an \u003cstrong\u003eAdafruit EInk Breakout Friend\u003c\/strong\u003e - your fun pal who's happy to lend a hand when you want to work with EInk\/E-Paper displays.\u003c\/p\u003e\n\u003cp\u003eLuckily for us, just about every small-medium size EInk display made these days has a standard 24-pin connection. This breakout will add all the power supply support circuitry and level shifting so you can attach your favorite display (up to tri-color 4.2\") and wire it up to your favourite development board.\u003c\/p\u003e\n\u003cp\u003eUsing the CircuitPython or Arduino libraries, you can create a 'frame buffer' with what pixels you want to have activated and then write that out to the display. Most simple breakouts leave it at that. But...just about all EInk displays are write-only and many only let you update the full display (not partial update). That means you have to buffer the full image you want to display, taking up precious RAM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Eink Friend is much friendlier - it comes with  256 Kilobit (32 Kilobyte) SRAM chip. \u003c\/strong\u003eThat means you can control up to a 4.2\" 300x400 tri-color display (300*400 * 2 colors \/ 8 bits-per-byte = 30KB).  This chip shares the SPI port the eInk display uses, so you only need one extra pin. And, no more frame-buffering! \u003cstrong\u003eYou can use the SRAM to set up whatever you want to display, then shuffle data from SRAM to eInk when you're ready. \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eThe library Adafruit wrote does all the work for you\u003c\/a\u003e\u003c\/strong\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e, you can just interface with it as if it were an Adafruit_GFX compatible display\u003c\/a\u003e. If you prefer not to use the chip, the libraries will automatically use the microcontroller\/microcomputer internal RAM.\u003c\/p\u003e\n\u003cp\u003eFor ultra-low power usages, the onboard 3.3V regulator has the Enable pin brought out so you can shut down the power to the SRAM and display. By default the RESE resistor is set to 0.5 ohms, which is the most common value, but by cutting\/soldering the bottom solder jumper you can set the resistor to 3 ohms.\u003c\/p\u003e\n\u003cp\u003eComes assembled and tested, with some header. You'll need a soldering iron to attach the header for breadboarding or installing into your project. \u003cstrong\u003eDoes not come with an EInk display! \u003c\/strong\u003eFor use with just about any EInk display that has a 24-pin FPC connector. \u003ca href=\"https:\/\/learn.adafruit.com\/assets\/57645\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSee these schematics to verify that your display matches before purchasing\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRevision History:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAs of November 2022\u003c\/b\u003e – we've updated this PCB with \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_Pinguin\"\u003eAdafruit Pinguin\u003c\/a\u003e to make a lovely and legible silkscreen - you may get the new PCB or the older version with vector fonts - both are identical other than the fancy silkscreen.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 34.7mm x 21.5mm x 3.5mm \/ 1.4\" x 0.8\" x 0.1\"\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 3.4g \/ 0.1oz\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e \u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/bare-e-ink-displays-crash-course\"\u003eBare E-Ink Displays Crash Course\u003c\/a\u003e What's the deal with all of these eInk displays?\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/4224\/guides\" rel=\"noopener\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":27842420506707,"sku":"ADA4224","price":6.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/4224-08.jpg?v=1555417044"},{"product_id":"adafruit-eink-feather-friend-with-32kb-sram","title":"Adafruit eInk Feather Friend with 32KB SRAM","description":"\u003cp\u003eEasy e-paper finally comes to your Feather with this \u003cstrong\u003eAdafruit EInk Feather Friend\u003c\/strong\u003e that's designed to make it a breeze to add an eInk display.\u003c\/p\u003e\n\u003cp\u003eChances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\n\u003cp\u003eWe've liked these displays for a long time, and there are Arduino\/CircuitPython drivers for all Feathers, so wouldn't an e-paper Feather Friend make a ton of sense? Luckily for us, just about every small-medium size EInk display made these days has a standard 24-pin connection. This Friend will add all the power supply support circuitry and level shifting so you can attach your favorite display (up to tri-color 4.2\") and wire it up to your favorite development board.\u003c\/p\u003e\n\u003cp\u003eUsing our CircuitPython or Arduino libraries, you can create a 'frame buffer' with what pixels you want to have activated and then write that out to the display. Most simple breakouts leave it at that. But...just about all EInk displays are write-only and many only let you update the full display (not partial update). That means you have to buffer the full image you want to display, taking up precious RAM.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe Eink Feather Friend is much \u003c\/strong\u003e\u003cstrong\u003efriendlier - it comes with  256 Kilobit (32 Kilobyte) SRAM chip. \u003c\/strong\u003eThat means you can control up to a 4.2\" 300x400 tri-color display (300*400 * 2 colors \/ 8 bits-per-byte = 30KB).  This chip shares the SPI port the eInk display uses, so you only need one extra pin. And, no more frame-buffering! \u003cstrong\u003eYou can use the SRAM to set up whatever you want to display, then shuffle data from SRAM to eInk when you're ready. \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eThe library does all the work for you\u003c\/a\u003e\u003c\/strong\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_EPD\"\u003e, you can just interface with it as if it were an Adafruit_GFX compatible display\u003c\/a\u003e. If you prefer not to use the chip, the libraries will automatically use the microcontroller\/microcomputer internal RAM.\u003c\/p\u003e\n\u003cp\u003eAdafruit even tossed on a MicroSD socket so you can store images, text files, whatever you like to display. Comes assembled and tested, with some header. You'll need a soldering iron to attach the header for installing onto your Feather. Stacking headers will let you put another FeatherWing on top.\u003c\/p\u003e\n\u003cp\u003e\u003cmeta charset=\"utf-8\"\u003e\u003cstrong\u003eDoes not come with an EInk display or extension cable!\u003c\/strong\u003e For use with just about any EInk display that has a 24-pin FPC connector. \u003ca href=\"https:\/\/learn.adafruit.com\/assets\/57645\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eSee these schematics to verify that your display matches before purchasing\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003e\u003cb\u003eRevision History:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cb\u003eAs of October 2022\u003c\/b\u003e\u003cspan\u003e \u003c\/span\u003e– we've updated this PCB with \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_Pinguin\"\u003eAdafruit Pinguin\u003c\/a\u003e to make a lovely and legible silkscreen - you may get the new black PCB or the older blue PCB version with vector fonts, they are functionally the same\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/bare-e-ink-displays-crash-course\"\u003eBare E-Ink Displays Crash Course\u003c\/a\u003e\n\u003cdiv class=\"product-learn-guide-tagline\"\u003eWhat's the deal with all of these eInk displays?\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/4446\/guides\" target=\"_blank\" rel=\"noopener\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":31268612046931,"sku":"ADA4446","price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/4446-06.jpg?v=1787231001"},{"product_id":"yukon","title":"Pimoroni Yukon","description":"\u003cp\u003eA high-power modular robotics and engineering platform, built around RP2040 and designed to drive the most ambitious robots, props and devices.\u003c\/p\u003e\n\u003ch3\u003eThe Do-Everything Board 🦾\u003c\/h3\u003e\n\u003cp\u003eYukon is a standalone controller that can be equipped with up to six \u003cstrong\u003einterchangeable modules\u003c\/strong\u003e capable of driving high-powered hardware - this is made possible by the unique pin capabilities of Raspberry Pi's multitalented RP2040 chip. This flexibility means you can drive many unique combinations of \u003cstrong\u003emotors, servos, steppers, speakers, LED strips and more\u003c\/strong\u003e, all from a single Yukon host!*\u003c\/p\u003e\n\u003cp\u003eTo ensure Yukon creations are adventure proof, each module is screwed down to ensure a solid mechanical and electrical connection.\u003c\/p\u003e\n\u003ch3\u003eAssembling Yukon 🚧\u003c\/h3\u003e\n\u003cp\u003eBig electronic projects can often involve a lot of soldering, splicing and other complicated assembly techniques, but not with Yukon! The host board and modules use \u003cstrong\u003esolderless connectors\u003c\/strong\u003e wherever possible so it's fast and friction-free to get started, and simple to swap out components if you need to.\u003c\/p\u003e\n\u003ch3\u003ePowering Yukon ⚡\u003c\/h3\u003e\n\u003cp\u003eSupplying external power to Yukon is easy thanks to its chunky XT30 connector, which enables you to attach 2 to 4 cell Lithium Polymer (LiPo) batteries (or any other source from 5V to 17V) to deliver \u003cstrong\u003eup to 15A continuous\u003c\/strong\u003e for your high-power projects.\u003c\/p\u003e\n\u003cp\u003eAn e-Fuse with switchable output is included to protect from accidental overvoltage and overcurrent events, along with internal sensors for monitoring voltage, current, and temperature whilst your programs run.\u003c\/p\u003e\n\u003ch3\u003eProgramming Yukon 💾\u003c\/h3\u003e\n\u003cp\u003eYukon is supported by a \u003cstrong\u003ecomprehensive MicroPython library\u003c\/strong\u003e with a whopping 50 (!) examples showing how to use the individual features of the board and all of its modules. There are also fully fledged showcase examples to show you how Yukon can be used to build a remote-controlled rover, spider tank, and pen plotter.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePowered by RP2040 (Dual Arm Cortex M0+ running at up to 133MHz with 264kB of SRAM)\u003c\/li\u003e\n\u003cli\u003e16MB of QSPI flash supporting XiP\u003c\/li\u003e\n\u003cli\u003e6 x slots for high power modules\u003c\/li\u003e\n\u003cli\u003eE-Fuse with switchable output (40A overcurrent and 18V overvoltage protection)\u003c\/li\u003e\n\u003cli\u003eXT30 connector for V+ and logic power (5 to 17V, 15A continuous)\u003c\/li\u003e\n\u003cli\u003eUSB-C for programming and logic power\u003c\/li\u003e\n\u003cli\u003ePower on-off button\u003c\/li\u003e\n\u003cli\u003e3 x user buttons (one of which also acts as BOOTSEL for entering DFU mode)\u003c\/li\u003e\n\u003cli\u003e2 x power and 2 x user LEDs\u003c\/li\u003e\n\u003cli\u003e2 x Qw\/ST connectors for attaching breakouts\u003c\/li\u003e\n\u003cli\u003eInternal voltage in, voltage out, current, and temperature sensors\u003c\/li\u003e\n\u003cli\u003eUnpopulated header for attaching \u003ca href=\"https:\/\/shop.pimoroni.com\/collections\/breakout-garden\"\u003eBreakout Garden\u003c\/a\u003e boards\u003c\/li\u003e\n\u003cli\u003eUnpopulated expansion headers for wiring up external buttons and extra IO\u003c\/li\u003e\n\u003cli\u003eFully assembled\u003c\/li\u003e\n\u003cli\u003eNo soldering required (unless you want to use the Breakout Garden or expansion headers).\u003c\/li\u003e\n\u003cli\u003eM2 screws for attaching modules\u003c\/li\u003e\n\u003cli\u003eRubber feet 🐾\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/yukon\"\u003eMicroPython firmware and library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eYukon modules and other components are sold separately.\u003c\/strong\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eYukon Make Anything! Kit Includes\u003c\/h2\u003e\n\u003cp\u003eYou can buy a Yukon host (plus screws and feet) on its own, or as part of the fully-featured Yukon Make Anything! Kit, which sets you up with all the tools to make a bunch of cool stuff. It includes \u003cstrong\u003esix different modules\u003c\/strong\u003e for driving a diverse range of hardware, plus a \u003cstrong\u003eselection of useful cables\u003c\/strong\u003e for feeding your Yukon power and data.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eYukon Host (plus screws and feet)\u003c\/li\u003e\n\u003cli\u003eDual Motor \/ Bipolar Stepper Module\u003c\/li\u003e\n\u003cli\u003eQuad Servo [Regulated] Module \u003c\/li\u003e\n\u003cli\u003eLED Strip Module\u003c\/li\u003e\n\u003cli\u003eAudio Amp Module\u003c\/li\u003e\n\u003cli\u003eDual Switched Power Output Module\u003c\/li\u003e\n\u003cli\u003eProto Module\u003c\/li\u003e\n\u003cli\u003eUSB-A to USB-C cable for programming\u003c\/li\u003e\n\u003cli\u003eLoose wire to XT30 cable for power\u003c\/li\u003e\n\u003cli\u003eXT60 to XT30 cable for power\u003c\/li\u003e\n\u003cli\u003e...all packed up neatly in a reusable Pirate-brand Loot Box.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eYukon Modules\u003c\/h2\u003e\n\u003cp\u003eCustomise Yukon to suit almost any project with our range of addon modules. You can populate your Yukon with a full load-out right away, or start with a few modules and expand as your project grows. There's also a proto module, for if you want to add a custom module like a buzzer or a potentiometer.\u003c\/p\u003e\n\u003ctable width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch3\u003eMotors\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eServos\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/en-eu\/products\/big-motor-encoder-module-for-yukon\" target=\"_blank\"\u003eBig Motor + Encoder\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/en-eu\/products\/dual-motor-bipolar-stepper-module-for-yukon\" target=\"_blank\"\u003eDual Motor \/ Bipolar Stepper\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/en-eu\/products\/quad-servo-module-for-yukon?variant=41187321479251\" target=\"_blank\"\u003eQuad Servo [Regulated]\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/en-eu\/products\/quad-servo-module-for-yukon?variant=41187321446483\" target=\"_blank\"\u003eQuad Servo [Direct]\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/en-eu\/products\/serial-servo-module-for-yukon\" target=\"_blank\"\u003eSerial Bus Servo\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch3\u003eOutput\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eAudio\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/en-eu\/products\/bench-power-module-for-yukon\" data-mce-href=\"\/en-eu\/products\/bench-power-module-for-yukon\" target=\"_blank\"\u003eBench Power [Step-down DAC]\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/en-eu\/products\/dual-switched-power-output-module-for-yukon\" data-mce-href=\"\/en-eu\/products\/dual-switched-power-output-module-for-yukon\" target=\"_blank\"\u003eDual Switched Power Output\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e\u003ca href=\"\/en-eu\/products\/audio-amp-module-for-yukon\" target=\"_blank\" data-mce-href=\"\/en-eu\/products\/audio-amp-module-for-yukon\"\u003eAudio Amp [Mono]\u003c\/a\u003e\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch3\u003eLighting\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003eCommunication\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/led-strip-module-for-yukon\" target=\"_blank\"\u003e\u003cstrong\u003eLED Strip\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/rm2-wireless-module-for-yukon\" target=\"_blank\"\u003e\u003cstrong\u003eRM2 Wireless\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003ch3\u003ePrototyping\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003ch3\u003e\u003c\/h3\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/proto-module-for-yukon\" target=\"_blank\"\u003e\u003cstrong\u003eProto\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/td\u003e\n\u003ctd\u003e\n\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003ePinout and Schematic\u003c\/h2\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/yukon_pinout_diagram.png\" target=\"_blank\"\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/yukon_pinout_diagram_1024x1024.png?v=1700758442\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/yukon_pinout_diagram.pdf?v=1700758554\" target=\"_blank\"\u003eDownload a printable PDF version\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/yukon_host_schematic.pdf?v=1701869757\" target=\"_blank\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/grabcad.com\/library\/pimoroni-yukon-with-modules-1\" target=\"_blank\"\u003e3D model (community-contributed model, WIP)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cp\u003eYou can find Yukon documentation, code examples and MicroPython builds at the link below:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/yukon\"\u003eMicroPython firmware and library\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you'd like to program Yukon from an Android phone then you could try the \u003ca href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.smartphoneremote.androidscriptfree\" rel=\"noopener\" target=\"_blank\"\u003eDroidScript\u003c\/a\u003e app, available on Google Play.  You'll need a \u003ca href=\"\/en-eu\/products\/usb-c-to-usb-c-cable\" rel=\"noopener\" target=\"_blank\"\u003eUSB-C cable\u003c\/a\u003e and a recent version of MicroPython firmware installed on the board.\u003c\/p\u003e\n\u003ch2\u003eConnecting Breakouts\u003c\/h2\u003e\n\u003cp\u003eThe Qw\/ST connectors on Yukon make it super easy to connect up \u003ca href=\"https:\/\/pimoroni-2.myshopify.com\/collections\/qwiic\"\u003eQwiic\u003c\/a\u003e or \u003ca href=\"https:\/\/pimoroni-2.myshopify.com\/collections\/stemma-qt\"\u003eSTEMMA QT\u003c\/a\u003e breakouts. If your breakout has a QW\/ST connector on board, you can plug it straight in with a \u003ca href=\"https:\/\/pimoroni-2.myshopify.com\/products\/jst-sh-cable-qwiic-stemma-qt-compatible\"\u003eJST-SH to JST-SH cable\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eBreakout Garden breakouts that don't have a Qw\/ST connector can be connected using a \u003ca href=\"https:\/\/pimoroni-2.myshopify.com\/products\/jst-sh-cable-qwiic-stemma-qt-compatible\"\u003eJST-SH to JST-SH cable\u003c\/a\u003e plus a \u003ca href=\"https:\/\/pimoroni-2.myshopify.com\/products\/stemma-qt-qwiic-to-breakout-garden-adapter\"\u003eQw\/ST to Breakout Garden adaptor\u003c\/a\u003e. Want to use multiple Qw\/ST breakouts at the same time? Try \u003ca href=\"https:\/\/pimoroni-2.myshopify.com\/products\/sparkfun-qwiic-multiport\"\u003ethis adaptor\u003c\/a\u003e!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/pimoroni\/pimoroni-pico\"\u003eList of breakouts\u003c\/a\u003e currently compatible with our MicroPython build.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMeasurements: 84mm x 67mm x 14mm (L x W x H). The mounting holes are M2.5 and 3mm in from each edge.\u003c\/li\u003e\n\u003cli\u003eYukon has some extra broken out headers that adventurous makers might find useful (note that these are unpopulated and so will require soldering):\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eControl\u003c\/strong\u003e header for connecting up external on-off and user\/boot buttons, as well as an external power LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExpansion\u003c\/strong\u003e header for connecting up external A and B user buttons, an LCD display (or use as GPIO), and SWD debugging\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe board's \u003cstrong\u003ecurrent draw\u003c\/strong\u003e when off is 2.05mA @ 5V and 3.25mA @ 17V. As such it is recommended to disconnect any battery pack if the project is not going to be used for a while, to avoid unnecessary draining.\u003c\/li\u003e\n\u003cli\u003eYukon comes with kapton tape on top of its 8 mounting posts. Remove these before installing any modules.\u003c\/li\u003e\n\u003cli\u003e* Some slot placement and combinations of modules may not be compatible due to shared pin functions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout RP2040\u003c\/h2\u003e\n\u003cp\u003eRaspberry Pi's RP2040 microcontroller is a dual core ARM Cortex M0+ running at up to 133Mhz. It bundles in 264kB of SRAM, 30 multifunction GPIO pins (including a four channel 12-bit ADC), a heap of standard peripherals (I2C, SPI, UART, PWM, clocks, etc), and USB support.\u003c\/p\u003e\n\u003cp\u003eOne very exciting feature of RP2040 is the programmable IOs which allow you to execute custom programs that can manipulate GPIO pins and transfer data between peripherals - they can offload tasks that require high data transfer rates or precise timing that traditionally would have required a lot of heavy lifting from the CPU.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Yukon Host Only","offer_id":41185258111059,"sku":"PIM687","price":20.0,"currency_code":"GBP","in_stock":true},{"title":"Yukon Starter Kit","offer_id":41185258143827,"sku":"PIM688","price":75.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/yukon-host-front.jpg?v=1701770369"},{"product_id":"infrared-receiver-remote","title":"Infrared Receiver Stick + Remote Kit","description":"\u003cp\u003eControl your project remotely with this infrared receiver and matching 21 button remote.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis compact receiver detects infrared signals (like the ones zapped out by the included remote) and converts them into simple digital signals that can be read by any microcontroller with a spare GPIO pin. This makes it easy to switch effects, adjust settings, or trigger actions at the press of a button.\u003c\/p\u003e\n\u003cp\u003eWe've written a nice \u003ca href=\"https:\/\/github.com\/pimoroni\/aye_arr\" rel=\"noopener\" target=\"_blank\"\u003eMicroPython library\u003c\/a\u003e that's compatible with any Pico\/RP2040\/RP2350 project. It supports advanced features like long presses and it has all the button codes for our remote built in so you don't need to figure them out yourself (scroll down for a handy cheat sheet!)\u003c\/p\u003e\n\u003cp\u003eIt works great with Tiny FX - our tiny lights-n-sound controller for models, dioramas and brick-based constructions. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-eu\/collections\/tiny-fx\" rel=\"noopener\" target=\"_blank\"\u003eClick here to view everything Tiny FX!\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eKit contains\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIR Receiver Stick\u003c\/li\u003e\n\u003cli\u003e3-Pin JST-SH cable (150mm, approx)\u003c\/li\u003e\n\u003cli\u003e21 button IR remote (includes CR2025 battery)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIR Receiver Stick comes with a cable that will let you plug it straight in to the three pin connector on Tiny FX. If you're planning on using it with another microcontroller, you'll probably want to pick up a \u003ca rel=\"noopener\" href=\"\/en-eu\/products\/pimoroni-pico-debug-cable\" target=\"_blank\"\u003eJST-SH to DuPont cable\u003c\/a\u003e to connect it up. We also stock longer \u003ca rel=\"noopener\" href=\"\/en-eu\/products\/grow-moisture-sensor-cables\" target=\"_blank\"\u003eJST-SH to JST-SH cables\u003c\/a\u003e if you want to position your IR Receiver Stick further away from your project.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eVishay VSOP38338 Remote Receiver Module (\u003ca href=\"https:\/\/4donline.ihs.com\/images\/VipMasterIC\/IC\/VISH\/VISH-S-A0004680289\/VISH-S-A0004680289-1.pdf?hkey=CECEF36DEECDED6468708AAF2E19C0C6\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e)\n\u003cul\u003e\n\u003cli\u003eInput voltage: 2.5 V – 5.5 V\u003c\/li\u003e\n\u003cli\u003eCurrent (max): 3mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003ePinout:\n\u003cul\u003e\n\u003cli\u003e'\u003cstrong\u003e+\u003c\/strong\u003e': Power In (5.5 V max)\u003c\/li\u003e\n\u003cli\u003e'\u003cstrong\u003eOUT\u003c\/strong\u003e': Data\u003c\/li\u003e\n\u003cli\u003e'\u003cstrong\u003e-\u003c\/strong\u003e': Ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/aye_arr\" rel=\"noopener\" target=\"_blank\"\u003eAye Arr MicroPython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/IR_Receiver_Stick_Schematic.pdf?v=1775578886\" rel=\"noopener\" target=\"_blank\"\u003eSchematic\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/ayearr_remote_diagram.png?v=1775661618\"\u003e\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe sensor on the IR Stick is \u003cstrong\u003edownwards facing\u003c\/strong\u003e (the hole on the underside of the breakout)\u003c\/li\u003e\n\u003cli\u003eThe remote has a see-through protective film on top of the buttons that can be removed, if you wish.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe remote comes with a clear plastic tab at the bottom to prevent the battery from draining whilst in transit. Remove this to power the remote up.\u003c\/li\u003e\n\u003cli\u003eThe 'Tales of the Space Age' demo is powered by \u003ca href=\"\/en-eu\/products\/tinyfx\" target=\"_blank\" rel=\"noopener\"\u003eTiny FX\u003c\/a\u003e, so we were able to plug the IR receiver straight in with the included cable. Hoorah!\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe \u003ca href=\"\/en-eu\/products\/wireless-plasma-kit?variant=40362173399123\" target=\"_blank\" rel=\"noopener\"\u003eSkully (Wireless Plasma Kit)\u003c\/a\u003e demo uses Plasma 2350 W as the controller, which doesn't have a 3-pin sensor connector. We connected the IR receiver via a custom 4-pin to 3-pin JST-SH cable into the Qw\/ST port (note that it’s not I2C, so the data pin used can’t be shared). Alternatively, you could connect it by soldering wires to the unpopulated headers.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":56197651104123,"sku":"PIM750","price":6.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/ir-receiver-3.jpg?v=1775576408"},{"product_id":"assembled-adafruit-featherwing-oled-128x64-oled-add-on-stemma-qt-qwiic","title":"Assembled Adafruit FeatherWing OLED - 128x64 OLED Add-on - STEMMA QT \/ Qwiic","description":"\u003cp\u003eAdd a gorgeous 128x64 monochrome OLED plus 3 user buttons to any Feather main board.\u003c\/p\u003e\n\u003cp\u003eA Feather board without ambition is a Feather board without FeatherWings! This is the \u003cstrong\u003eFeatherWing 128x64 OLED\u003c\/strong\u003e: it adds a gorgeous 128x64 monochrome OLED plus 3 user buttons to \u003cem\u003eany\u003c\/em\u003e Feather main board. Comes fully assembled so you can connect the FeatherWing on top of your Feather board and let the board take flight,\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eno soldering required!\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThese displays are small, only about 1.3\" diagonal, but very readable due to the high contrast of an OLED display. This screen is made of 128x64 individual white OLED pixels, and because the display makes its own light, no backlight is required. This reduces the power required to run the OLED, and is why the display has such high contrast; we really like this miniature display for its crispness! We also toss on a reset button and three mini tactile buttons called A B and C, so you can add a mini user interface to your feather.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/adafruit-featherwing-oled-128x32\" target=\"_blank\" rel=\"noopener\"\u003eIf you've used our 128x32 OLED FeatherWing\u003c\/a\u003e, you'll be happy to know that this FeatherWing is pin-compatible for a quick and easy upgrade. Note that you will need new code since the OLED driver is SH1107, not SSD1306.\u003c\/p\u003e\n\u003cp\u003eThe display uses only I2C, so you can easily connect it up with just two pins (plus reset, power, and ground!). There's a reset button on the top. We've even included a \u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eSparkFun qwiic\u003c\/a\u003e-compatible\u003cstrong\u003e \u003ca href=\"https:\/\/learn.adafruit.com\/introducing-adafruit-stemma-qt\" rel=\"noopener\" target=\"_blank\"\u003eSTEMMA QT\u003c\/a\u003e\u003c\/strong\u003e connector for the I2C bus so that you can plug and play\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eany\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003eof our STEMMA QT, qwiic, or\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4528\"\u003eGrove \u003c\/a\u003e\u003ca href=\"\/en-eu\/products\/grove-to-stemma-qt-qwiic-jst-sh-cable-100mm-long\" target=\"_blank\" rel=\"noopener\"\u003eI\u003c\/a\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/4528\"\u003e2C sensors\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand device peripherals!\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003ePlease note that you cannot use this Wing itself as a STEMMA peripheral with only a STEMMA cable connected; it is meant only to be used as a FeatherWing, with all pins soldered \u0026amp; plugged\/connected to the Feather driver.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eTested working with \u003cstrong\u003eall Feather boards.\u003c\/strong\u003e The OLED uses only the two I2C pins on the Feather plus reset, and you can pretty much stack it with any other FeatherWing, even ones that use I2C since that is a shared bus. This display is an SH1107, which has both Arduino library and CircuitPython support. To use it,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-128x64-oled-featherwing\"\u003echeck out the tutorial! It has schematics, datasheets, files, and code examples.\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003eProduct Dimensions: 52.0mm x 23.0mm x 11.8mm \/ 2.0\" x 0.9\" x 0.5\"\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 8.1g \/ 0.3oz\u003c\/p\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-128x64-oled-featherwing\"\u003ePrimary Guide: Adafruit 128x64 OLED FeatherWing\u003c\/a\u003e\u003cbr\u003eEasily add a gorgeous 128x64 OLED to your Feather project!\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6313\/guides\" target=\"_blank\" rel=\"noopener\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56205716390267,"sku":"ADA6313","price":12.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6313-00.jpg?v=1776174440"},{"product_id":"adafruit-esp32-s2-reverse-tft-feather-with-wfl-stemma-qt-qwiic","title":"Adafruit ESP32-S2 Reverse TFT Feather with w.FL - STEMMA QT \/ Qwiic","description":"\u003cp\u003eA super slim ESP32-S2 Feather with 240x135 colour TFT mounted on the back.\u003c\/p\u003e\n\u003cp\u003eLike Missy Elliot, we like to \u003ca href=\"https:\/\/www.youtube.com\/watch?v=cjIvu7e6Wq8\"\u003e\"put our [Feather] down, flip it and reverse it\"\u003c\/a\u003e and that's exactly what we've done with this new development board. It's basically our \u003cstrong\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/5300\"\u003eESP32-S2 TFT Feather\u003c\/a\u003e\u003c\/strong\u003e but with the 240x135 color TFT display on the back-side not the front-side. That makes it great for panel-mounted projects, particularly since we've also got some space for 3 buttons to go along. It's like an all-in-one display interface dev board, powered by the fantastic ESP32-S2 WIFI module.\u003c\/p\u003e\n\u003cp\u003eThis feather comes with native USB and \u003cstrong\u003e4 MB flash + 2 MB of PSRAM\u003c\/strong\u003e, so it is perfect for use with CircuitPython or Arduino with low-cost WiFi. Native USB means it can act like a keyboard or a disk drive. WiFi means it's awesome for IoT projects. And Feather means it works with the large community of Feather Wings for expandability.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis version has a wFL connector\u003c\/strong\u003e, which means you can connect an external antenna - great for mounting outside an enclosure. Please note a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/wifi-antenna-with-w-fl-mhf3-ipex3-connector\" target=\"_blank\" rel=\"noopener\"\u003ew.FL antenna\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eor\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/rp-sma-to-w-fl-mhf3-ipex3-adapter\" target=\"_blank\" rel=\"noopener\"\u003eadapter\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eis NOT included!\u003c\/p\u003e\n\u003cp\u003eThe ESP32-S2 is a highly-integrated, low-power, 2.4 GHz Wi-Fi System-on-Chip (SoC) solution that now has \u003cstrong\u003ebuilt-in native USB\u003c\/strong\u003e as well as some other interesting new technologies like Time of Flight distance measurements. With its state-of-the-art power and RF performance, this SoC is an ideal choice for a wide variety of application scenarios relating to the Internet of Things (IoT), wearable electronics, and smart homes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note \u003c\/strong\u003ethe Feather ESP32-S2 has a single-core 240 MHz chip so that it won't be as fast as ESP32's with dual-core. Also, there is no Bluetooth® support. However, we are super excited about the ESP32-S2's native USB which unlocks a lot of capabilities for advanced interfacing! This ESP32-S2 mini-module we are using on the Feather comes with 4 MB flash and 2 MB PSRAM so you can buffer massive JSON files for parsing!\u003c\/p\u003e\n\u003cp\u003eThe color TFT is connected to the SPI pins, and uses additional pins for control that are not exposed to the breakout pads. \u003ca href=\"\/en-eu\/products\/adafruit-1-14-240x135-color-tft-display-microsd-card-breakout-st7789\" target=\"_blank\" rel=\"noopener\"\u003eIt's the same display as you see here, with 240x135 pixels and is IPS\u003c\/a\u003e so you get bright color at any angle. The backlight is also connected to a separate pin so you can PWM the backlight up and down as desired.\u003c\/p\u003e\n\u003cp\u003eFor low power usage, the Feather has a \u003cem\u003esecond\u003c\/em\u003e RT9080 regulator. The regulator is controlled with a GPIO pin on the enable line and can shut off power to the Stemma QT port and TFT. There is also a separate power pin for the NeoPixel that can be used to disable it for even lower quiescent power. With everything off and in deep sleep mode, the TFT feather uses about 40uA of current.\u003c\/p\u003e\n\u003cp style=\"padding: 0.5em; border: 2px solid orange;\"\u003e\u003ca href=\"\/en-eu\/products\/wifi-antenna-with-w-fl-mhf3-ipex3-connector\" target=\"_blank\" rel=\"noopener\"\u003ew.FL antennae\u003c\/a\u003e and \u003ca href=\"\/en-eu\/products\/rp-sma-to-w-fl-mhf3-ipex3-adapter\" target=\"_blank\" rel=\"noopener\"\u003eadapters\u003c\/a\u003e are sold separately.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32-S2 240MHz Tensilica processor \u003c\/strong\u003e- the next generation of ESP32, now with native USB so it can act like a keyboard\/mouse, MIDI device, disk drive, etc!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMini module\u003c\/strong\u003e has FCC\/CE certification and comes with 4 MByte of Flash and 2 MByte of PSRAM - you can have huge data buffers\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e\u003ca href=\"\/en-eu\/products\/adafruit-1-14-240x135-color-tft-display-microsd-card-breakout-st7789\" target=\"_blank\" rel=\"noopener\"\u003eColor 1.14\" IPS TFT with 240x135 pixels\u003c\/a\u003e \u003c\/strong\u003e- bright and colorful display with ST7789 chipset that can be viewed at any angle.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ew.FL antenna connector\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor connecting external antennas. Note this is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eNOT\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eu.FL! \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree User Tactile buttons \u003c\/strong\u003e- D0, D1, and D2. D0\/BOOT0 is also used for entering ROM bootloader mode if necessary.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower options\u003c\/strong\u003e - USB type C \u003cstrong\u003eor\u003c\/strong\u003e Lipoly battery\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in battery charging\u003c\/strong\u003e when powered over USB-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLiPoly battery monitor\u003c\/strong\u003e - MAX17048 chip actively monitors your battery for voltage and state of charge \/ percentage reporting over I2C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReset and DFU\u003c\/strong\u003e (BOOT0) buttons to get into the ROM bootloader (which is a USB serial port so you don't need a separate cable!)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSerial debug output pin\u003c\/strong\u003e (optional, for checking the hardware serial debug console)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSTEMMA QT\u003c\/strong\u003e connector for I2C devices, with switchable power, so you can go into low power mode.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOn\/Charge\/User\u003c\/strong\u003e LEDs + status \u003cstrong\u003eNeoPixel \u003c\/strong\u003ewith pin-controlled power for low power usage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow Power friendly\u003c\/strong\u003e! In deep sleep mode, we can get down to 40~50uA of current draw from the Lipoly connection. Quiescent current is from the power regulator, ESP32-S2 chip, and Lipoly monitor. Turn off the NeoPixel and external I2C\/TFT power for the lowest quiescent current draw.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eWorks with Arduino or CircuitPython\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/esp32-s2-reverse-tft-feather\"\u003ePrimary Guide: Adafruit ESP32-S2 Reverse TFT Feather\u003c\/a\u003e\u003cbr\u003eThe same Feather you know and love, with the TFT on the backside!\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6312\/guides\" target=\"_blank\" rel=\"noopener\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56205788643707,"sku":"ADA6312","price":19.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6312-00.jpg?v=1776178227"},{"product_id":"spoke-capacitive-touch-controller-board","title":"SPOKE - Capacitive Touch Controller Board","description":"\u003cp\u003e\u003cspan\u003eTurn almost any conductive material or object into a computer input. \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eSPOKE is a plug-and-play capacitive touch board built around the Raspberry Pi RP2040. Plug it into any computer and it immediately shows up as a MIDI controller or re-code it to have it as a keyboard\/mouse emulator or serial device - no drivers, no setup, no faff. It can control music software, video, lighting, games, or pretty much any application that accepts MIDI, HID, or OSC input, straight out of the box.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eBut you don't need a DAW, an IDE, or any specialist software to use it! The SPOKE website has web-based tools for playing and recording music, editing your code, and building new interactions, all running in a browser. Just plug in, open a tab, and start making things. The barrier to entry is about as low as it gets.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eIf you do want to go deeper, the firmware is CircuitPython and lives on the board as a plain \u003ccode\u003ecode.py\u003c\/code\u003e file. Tweak it in any text editor, IDE, or right there in the browser tool, to remap inputs, change modes, or build something entirely new.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePowered by Raspberry Pi RP2040\u003c\/li\u003e\n\u003cli\u003e27 capacitive touch inputs\u003c\/li\u003e\n\u003cli\u003eNeoPixel RGB LEDs\u003c\/li\u003e\n\u003cli\u003eJST-SH connectors for extended wiring\u003c\/li\u003e\n\u003cli\u003eUSB-C, plug-and-play — no drivers needed\u003c\/li\u003e\n\u003cli\u003eUSB-MIDI by default; also supports HID keyboard\/mouse, OSC, and Serial\u003c\/li\u003e\n\u003cli\u003eWeb-based tools for music making, sound recording, and code editing — no DAW or IDE required\u003c\/li\u003e\n\u003cli\u003eRuns CircuitPython — just edit \u003ccode\u003ecode.py\u003c\/code\u003e\n\u003c\/li\u003e\n\u003cli\u003eOpen-source hardware and firmware\u003c\/li\u003e\n\u003cli\u003ePolyphonic MIDI with configurable notes, scales, and modes\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cp\u003eFind full firmware instructions and code examples at \u003ca href=\"https:\/\/www.spokeboard.com\/\" rel=\"noopener\" target=\"_blank\"\u003espokeboard.com\u003c\/a\u003e.\u003cbr\u003e\u003c\/p\u003e","brand":"VulpesLabs","offers":[{"title":"Default Title","offer_id":56217676382587,"sku":"SPOKE","price":33.33,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/spoke.png?v=1777647498"},{"product_id":"spoke-mini-diy-capacitive-touch-kit","title":"SPOKE-mini - DIY Capacitive Touch Kit","description":"\u003cp\u003eAll the touch-sensing magic of SPOKE, in a small, embeddable board that you solder yourself.\u003c\/p\u003e\n\u003cp\u003eSPOKE-mini turns a Raspberry Pi Pico into a 26-input capacitive touch controller. It's designed to be embedded inside projects, tucked behind an instrument, hidden in an installation, sewn into a costume, anywhere you want the sensing but not the visible PCB.\u003c\/p\u003e\n\u003cp\u003eThe kit is a great beginner soldering project: pop the 26 resistors into their labelled spots, solder in the Pico, flash CircuitPython, drop in the example code, and you're away. From kit to working controller in an afternoon.\u003c\/p\u003e\n\u003cp\u003eLike \u003ca rel=\"noopener\" href=\"\/en-eu\/products\/spoke-capacitive-touch-controller-board\" target=\"_blank\"\u003eSPOKE\u003c\/a\u003e, it connects to any computer as a USB device and can control music, video, games, or any application via MIDI, keyboard mappings, or serial.\u003c\/p\u003e\n\u003ch2\u003eKit includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSPOKE-mini PCB\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi Pico H\u003c\/li\u003e\n\u003cli\u003e26 × 1MΩ resistors (plus a few spares)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA micro-USB cable is \u003cstrong\u003enot included\u003c\/strong\u003e in the kit, but if you need one then we \u003ca href=\"\/en-eu\/products\/usb-a-to-microb-cable-black\" target=\"_blank\"\u003esell them separately\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePowered by Raspberry Pi Pico\u003c\/li\u003e\n\u003cli\u003e26 capacitive touch inputs\u003c\/li\u003e\n\u003cli\u003eRuns CircuitPython\u003c\/li\u003e\n\u003cli\u003eUSB-MIDI by default; also supports HID keyboard\/mouse, OSC, and Serial\u003c\/li\u003e\n\u003cli\u003eOpen-source hardware and firmware\u003c\/li\u003e\n\u003cli\u003eCompact footprint — designed for embedding\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cp\u003eFind assembly instructions, firmware and code examples \u003cspan\u003eat \u003c\/span\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.spokeboard.com\/\" target=\"_blank\"\u003espokeboard.com\u003c\/a\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e","brand":"VulpesLabs","offers":[{"title":"Default Title","offer_id":56217846448507,"sku":"SPOKE-MINI-KIT","price":20.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/spoke-mini-kit-1.jpg?v=1779898595"},{"product_id":"generic-microsd-card-with-raspberry-pi-os","title":"microSD Card with Raspberry Pi OS - 64GB","description":"\u003cp\u003eThese microSD cards have Raspberry Pi OS pre-installed and come with a full size SD adapter.\u003c\/p\u003e\n\u003cp\u003eThese A1 cards are a great lower-cost option for installs that see lighter use cases than the \u003ca rel=\"noopener\" href=\"\/en-eu\/products\/microsd-card-with-raspberry-pi-os\" target=\"_blank\"\u003eofficial A2-rated cards\u003c\/a\u003e. They pass the built-in 'agnostic' test suite in Raspberry Pi OS.\u003c\/p\u003e\n\u003cp\u003eThey're pre-programmed with the latest version of Raspberry Pi OS, so you can pop one in to your Pi and get going in a flash. Perfect for Raspberry Pi beginners and convenient for those with more experience!\u003c\/p\u003e\n\u003cp\u003e⚠ Note that \u003cstrong\u003ethe microSD cards come with a full size SD adaptor\u003c\/strong\u003e. Insert your thumbnail in the indentation along the bottom edge. You should then be able to slide out the microSD card.\u003c\/p\u003e\n\u003ch2\u003e32 bit or 64 bit?\u003c\/h2\u003e\n\u003cp\u003eThese SD cards contain the \u003cstrong\u003e64 bit version of Raspberry Pi OS\u003c\/strong\u003e. This will work out of the box with all recent Raspberry Pi computers. If you have a Raspberry Pi 1, 2 or an original Zero\/Zero W you will need to \u003ca rel=\"noopener\" href=\"https:\/\/www.raspberrypi.com\/software\/\" target=\"_blank\"\u003ereflash the card\u003c\/a\u003e with the 32 bit version of Pi OS before use.\u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMemory Card Capacity - 64GB\u003c\/li\u003e\n\u003cli\u003eMemory Type - Micro SD , Micro SDXC\u003c\/li\u003e\n\u003cli\u003eModel\/Series\/Type - Kingston Canvas Select Plus\u003c\/li\u003e\n\u003cli\u003eSequential Read Speed - Up To 100MB\/s\u003c\/li\u003e\n\u003cli\u003eSequential Write Speed - Minimum 10MB\/s\u003c\/li\u003e\n\u003cli\u003eClass Rating - Class 10 (10MB\/s)\u003c\/li\u003e\n\u003cli\u003eUHS Speed Class - U1\u003c\/li\u003e\n\u003cli\u003eUHS Interface - UHS-I\u003c\/li\u003e\n\u003cli\u003ePre-programmed with Raspberry Pi OS.\u003c\/li\u003e\n\u003cli\u003eComes with a microSD-to-SD adapter\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"64GB","offer_id":56248705810811,"sku":"COM4200","price":16.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/211179.jpg?v=1778681625"},{"product_id":"flat-usb-c-to-usb-c-cable","title":"Flat USB-C to USB-C Cable","description":"\u003cp\u003eQuality flat USB-C cables with metal connectors. Available in 0.2m and 1m lengths.\u003c\/p\u003e\n\u003cp\u003eThese flat, flexible USB-C cables support super-fast data transfer and are speedy enough to use as display cables. They also work great with our \u003ca href=\"\/en-eu\/collections\/pico\" rel=\"noopener\" target=\"_blank\"\u003egrowing range\u003c\/a\u003e of USB-C RP2040\/RP2350 based microcontrollers!\u003c\/p\u003e\n\u003cp\u003eThis straight cable has \u003cstrong\u003eregular USB-C plugs on both ends\u003c\/strong\u003e and is available in two lengths - 0.2m for if you want to plug something directly into your laptop, or 1m for more general uses.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"5uf6r0\" data-start=\"805\" data-end=\"863\"\u003eHigh speed USB4 cable with 80Gbps data transfer speeds\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"8pp8hw\" data-start=\"864\" data-end=\"944\"\u003eSupports 240W (48V 5A) Power Delivery\u003c\/li\u003e\n\u003cli data-section-id=\"1bvi25u\" data-start=\"945\" data-end=\"1004\"\u003eSupports display resolutions up to 8K@60Hz, 4K@240Hz, or 2K@360Hz.\u003c\/li\u003e\n\u003cli data-section-id=\"1xsfun0\" data-start=\"1005\" data-end=\"1069\"\u003eThunderbolt 3 and 4 compatible.\u003c\/li\u003e\n\u003cli data-section-id=\"yh6bd2\" data-start=\"1070\" data-end=\"1126\"\u003eFlat, flexible design that resists tangles and rolls up neatly.\u003c\/li\u003e\n\u003cli data-section-id=\"1p2n5f\" data-start=\"1127\" data-end=\"1204\" data-is-last-node=\"\"\u003eDurable aluminium connectors.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"0.2m","offer_id":56263243530619,"sku":"UB8-013375","price":5.0,"currency_code":"GBP","in_stock":true},{"title":"1m","offer_id":56263353762171,"sku":"UB8-013377","price":6.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/ub8-general_pics_4_2.png?v=1779374309"},{"product_id":"flat-usb-c-to-usb-c-extension-cable","title":"Flat USB-C to USB-C Extension Cable","description":"\u003cp\u003eQuality flat USB-C plug to socket extension cables with metal connectors. Available in 0.2m and 0.5m lengths.\u003c\/p\u003e\n\u003cp\u003eThese flat, flexible USB-C cables support fast data transfer and are speedy enough to use as display cables. They also work great with our \u003ca rel=\"noopener\" href=\"\/en-eu\/collections\/pico\" target=\"_blank\"\u003egrowing range\u003c\/a\u003e of USB-C RP2040\/RP2350 based microcontrollers!\u003c\/p\u003e\n\u003cp\u003eThis cable has \u003cstrong\u003ea regular USB-C plug on one end, and a USB-C socket on the other\u003c\/strong\u003e. It's available in two lengths - 0.2m and 0.5m.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-end=\"863\" data-start=\"805\" data-section-id=\"5uf6r0\"\u003eHigh speed USB4 cable with 40Gbps data transfer speeds\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-end=\"944\" data-start=\"864\" data-section-id=\"8pp8hw\"\u003eSupports 240W (48V 5A) Power Delivery\u003c\/li\u003e\n\u003cli data-end=\"1004\" data-start=\"945\" data-section-id=\"1bvi25u\"\u003eSupports display resolutions up to 8K@60Hz, 4K@240Hz, or 2K@360Hz.\u003c\/li\u003e\n\u003cli data-end=\"1069\" data-start=\"1005\" data-section-id=\"1xsfun0\"\u003eThunderbolt 3 and 4 compatible.\u003c\/li\u003e\n\u003cli data-end=\"1126\" data-start=\"1070\" data-section-id=\"yh6bd2\"\u003eFlat, flexible design that resists tangles and rolls up neatly.\u003c\/li\u003e\n\u003cli data-is-last-node=\"\" data-end=\"1204\" data-start=\"1127\" data-section-id=\"1p2n5f\"\u003eDurable aluminium connectors.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"0.2m","offer_id":56263459111291,"sku":"UB8-013384","price":5.0,"currency_code":"GBP","in_stock":true},{"title":"0.5m","offer_id":56263459144059,"sku":"UB8-013385","price":5.83,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/ub8-013384_combined_1.png?v=1779378680"},{"product_id":"flat-usb-c-to-usb-c-right-angle-cable","title":"Flat USB-C to USB-C Right Angle Cable","description":"\u003cp\u003eQuality flat USB-C cables with metal connectors and a upwards-pointing right angle plug on one end. Available in 0.2m and 1m lengths.\u003c\/p\u003e\n\u003cp\u003eThese flat, flexible USB-C cables support super-fast data transfer and are speedy enough to use as display cables. They also work great with our \u003ca href=\"\/en-eu\/collections\/pico\" rel=\"noopener\" target=\"_blank\"\u003egrowing range\u003c\/a\u003e of USB-C RP2040\/RP2350 based microcontrollers! This right-angle cable works particularly nicely with \u003ca href=\"\/en-eu\/products\/presto\" target=\"_blank\"\u003ePimoroni Presto\u003c\/a\u003e, if you want to avoid having a regular USB-C connector poking out of the side.\u003c\/p\u003e\n\u003cp\u003eThis cable has \u003cstrong\u003ea regular USB-C plug on one end and an upwards-pointing right-angle USB-C plug on the other.\u003c\/strong\u003e\u003cb\u003e \u003c\/b\u003eIt's available in two lengths - 0.2m for if you want to plug something directly into your laptop, or 1m for more general uses.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"5uf6r0\" data-start=\"805\" data-end=\"863\"\u003eHigh speed USB4 cable with 80Gbps data transfer speeds\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"8pp8hw\" data-start=\"864\" data-end=\"944\"\u003eSupports 240W (48V 5A) Power Delivery\u003c\/li\u003e\n\u003cli data-section-id=\"1bvi25u\" data-start=\"945\" data-end=\"1004\"\u003eSupports display resolutions up to 8K@60Hz, 4K@240Hz, or 2K@360Hz.\u003c\/li\u003e\n\u003cli data-section-id=\"1xsfun0\" data-start=\"1005\" data-end=\"1069\"\u003eThunderbolt 3 and 4 compatible.\u003c\/li\u003e\n\u003cli data-section-id=\"yh6bd2\" data-start=\"1070\" data-end=\"1126\"\u003eFlat, flexible design that resists tangles and rolls up neatly.\u003c\/li\u003e\n\u003cli data-section-id=\"1p2n5f\" data-start=\"1127\" data-end=\"1204\" data-is-last-node=\"\"\u003eDurable aluminium connectors.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"0.2m","offer_id":56263536345467,"sku":"UB8-013378","price":5.0,"currency_code":"GBP","in_stock":true},{"title":"1m","offer_id":56263536378235,"sku":"UB8-013380","price":6.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/comboooo_abababbb.png?v=1779380168"},{"product_id":"flat-usb-c-to-usb-c-sideways-right-angle-cable","title":"Flat USB-C to USB-C Sideways Right Angle Cable","description":"\u003cp\u003eQuality flat USB-C cables with metal connectors and a sideways-pointing right angle plug on one end. Available in 0.2m and 1m lengths.\u003c\/p\u003e\n\u003cp\u003eThese flat, flexible USB-C cables support super-fast data transfer and are speedy enough to use as display cables. They also work great with our \u003ca href=\"\/en-eu\/collections\/pico\" rel=\"noopener\" target=\"_blank\"\u003egrowing range\u003c\/a\u003e of USB-C RP2040\/RP2350 based microcontrollers!\u003c\/p\u003e\n\u003cp\u003eThis cable has a \u003cstrong\u003eregular USB-C plug on one end and a sideways-pointing right-angle USB-C plug on the other.\u003c\/strong\u003e\u003cb\u003e \u003c\/b\u003eIt's available in two lengths - 0.2m for if you want to plug something directly into your laptop, or 1m for more general uses.\u003c\/p\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli data-section-id=\"5uf6r0\" data-start=\"805\" data-end=\"863\"\u003eHigh speed USB4 cable with 80Gbps data transfer speeds\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli data-section-id=\"8pp8hw\" data-start=\"864\" data-end=\"944\"\u003eSupports 240W (48V 5A) Power Delivery\u003c\/li\u003e\n\u003cli data-section-id=\"1bvi25u\" data-start=\"945\" data-end=\"1004\"\u003eSupports display resolutions up to 8K@60Hz, 4K@240Hz, or 2K@360Hz.\u003c\/li\u003e\n\u003cli data-section-id=\"1xsfun0\" data-start=\"1005\" data-end=\"1069\"\u003eThunderbolt 3 and 4 compatible.\u003c\/li\u003e\n\u003cli data-section-id=\"yh6bd2\" data-start=\"1070\" data-end=\"1126\"\u003eFlat, flexible design that resists tangles and rolls up neatly.\u003c\/li\u003e\n\u003cli data-section-id=\"1p2n5f\" data-start=\"1127\" data-end=\"1204\" data-is-last-node=\"\"\u003eDurable aluminium connectors.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"0.2m","offer_id":56264985739643,"sku":"UB8-013381","price":5.0,"currency_code":"GBP","in_stock":true},{"title":"1m","offer_id":56264985772411,"sku":"UB8-013383","price":6.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/ub8-general_pics_9_1.png?v=1779452038"},{"product_id":"sonoff-smart-dimmer-wall-switch-matter","title":"Sonoff Smart Dimmer Wall Switch (Matter)","description":"\u003cp\u003eThis state-of-the-art dimmer wall switch uses Matter over Wi-Fi and will work with many smart home ecosystems.\u003c\/p\u003e\n\u003cp\u003eUpgrading your wall switches to smart switches means you can still engage muscle memory and poke at the physical buttons like you're used to. However, they also make it possible to \u003cstrong\u003econtrol your lights using an app\u003c\/strong\u003e, \u003cstrong\u003ehook them up to your voice assistant and even set up automations\u003c\/strong\u003e to adjust the lighting automatically.\u003c\/p\u003e\n\u003cp\u003eThanks to Matter support, you can use it with Home Assistant or with Alexa, Google Assistant, or Siri—making your lighting easier, smarter, and more connected than ever.\u003c\/p\u003e\n\u003cp\u003eThis product is designed to be wired into a \u003cstrong\u003e86 type or EU switch \u003c\/strong\u003ebox with neutral wiring. You should only use it with \u003cstrong\u003evoltages between 220 and 240V\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: This product requires mains wiring. Please ensure you have the skills and knowledge to install it safely or consult a qualified electrician!\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Bulb Compatibility:\u003c\/strong\u003e Works seamlessly with many common bulb types, including dimmable LEDs up to 200VA, incandescent and halogen lamps up to 400W, and dimmable electronic transformers up to 200W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatter Certified:\u003c\/strong\u003e Compatible with Matter-enabled hubs and gateways. We're big fans of \u003ca rel=\"noopener\" href=\"https:\/\/www.home-assistant.io\/\" target=\"_blank\"\u003eHome Assistant\u003c\/a\u003e!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Control: \u003c\/strong\u003eHook up Alexa, Google Assistant, or Siri for hands-free operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Access:\u003c\/strong\u003e Control your lighting remotely via Home Assistant or Sonoff's eWeLink app, allowing for scheduling and automation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTech Specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRating: 220-240V~ 50Hz 400W Max Resistive load\u003c\/li\u003e\n\u003cli\u003eLED: 200VA\u003c\/li\u003e\n\u003cli\u003eCompatible with dimmable LEDs, incandescent, and halogen bulbs and dimmable electronic transformers (for ELV systems)*\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecommended wiring: 0.75mm² to 1.5mm² \/ 18AWG to 16AWG SOL\/STR copper conductor onl\u003c\/li\u003e\n\u003cli\u003eMCU: ESP32-C3\u003c\/li\u003e\n\u003cli\u003eWi-Fi: IEEE 802.11b\/g\/n 2.4GHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCertification: \u003cspan\u003eCE\/RoHS\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 86x86x33.7mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e* Note that this switch is \u003cstrong\u003enot compatible\u003c\/strong\u003e with fluorescent lamps, CFLs, LED strips, and inductive loads (e.g., motors, fans). \u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cp\u003eCheck out the \u003ca href=\"https:\/\/help.sonoff.tech\/docs\/Orb-DIM\" rel=\"noopener\" target=\"_blank\"\u003eSonoff knowledge centre\u003c\/a\u003e for technical details, compatibility, troubleshooting and setup tips.\u003c\/p\u003e\n\u003ch2\u003eWhat is Matter?\u003c\/h2\u003e\n\u003cp\u003eMatter is a modern smart home standard that makes it\u003cstrong\u003e easier for devices from different brands to work together reliably\u003c\/strong\u003e. Matter-certified devices like this one can be used across multiple platforms, including Home Assistant, Apple Home, Google Home and Alexa.\u003c\/p\u003e\n\u003cp\u003eMatter devices are \u003cstrong\u003edesigned to work locally\u003c\/strong\u003e on your home network, so they do not rely on the internet or a cloud service to function. This means faster response times, improved reliability and better privacy.\u003c\/p\u003e\n\u003cp\u003eInstead of using its own special radio tech like Zigbee or Z-Wave,\u003cstrong\u003e \u003c\/strong\u003eMatter \u003cstrong\u003eruns over standard home networking technologies\u003c\/strong\u003e like Wi-Fi, Ethernet, or Thread. This helps ensure long-term compatibility and makes it easier to mix and match smart home products from different manufacturers.\u003c\/p\u003e\n\u003cp\u003eWant to learn more? Check out the \u003ca href=\"https:\/\/buildwithmatter.com\"\u003eofficial Matter website\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sonoff","offers":[{"title":"Default Title","offer_id":56278650159483,"sku":"MINI-DIM-E","price":22.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/MINI-DIM-E_MAIN.png?v=1780487721"},{"product_id":"sonoff-smart-dimmer-switch-matter","title":"Sonoff Smart Dimmer Switch (Matter)","description":"\u003cp\u003eThis state-of-the-art smart dimmer module uses Matter over Wi-Fi and will work with many smart home ecosystems.\u003c\/p\u003e\n\u003cp\u003eWiring a smart module like this behind your existing light switch means you can \u003cstrong\u003econtrol your lights using an app\u003c\/strong\u003e, \u003cstrong\u003ehook them up to your voice assistant and even set up automations\u003c\/strong\u003e to adjust the lighting automatically.\u003c\/p\u003e\n\u003cp\u003eThanks to Matter support, you can use it with Home Assistant or with Alexa, Google Assistant, or Siri—making your lighting easier, smarter, and more connected than ever.\u003c\/p\u003e\n\u003cp\u003eThis product \u003cstrong\u003erequires neutral wiring\u003c\/strong\u003e. You should only use it with \u003cstrong\u003evoltages between 220 and 240V\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: This product requires mains wiring. Please ensure you have the skills and knowledge to install it safely or consult a qualified electrician!\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Bulb Compatibility:\u003c\/strong\u003e Works seamlessly with many common bulb types, including dimmable LEDs up to 200VA, incandescent and halogen lamps up to 400W, and dimmable electronic transformers up to 200W.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMatter Certified:\u003c\/strong\u003e Compatible with Matter-enabled hubs and gateways. We're big fans of \u003ca href=\"https:\/\/www.home-assistant.io\/\" rel=\"noopener\" target=\"_blank\"\u003eHome Assistant\u003c\/a\u003e!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoice Control: \u003c\/strong\u003eHook up Alexa, Google Assistant, or Siri for hands-free operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Access:\u003c\/strong\u003e Control your lighting remotely via Home Assistant or Sonoff's eWeLink app, allowing for scheduling and automation.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTech Specs\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRating: 220-240V~ 50Hz 400W Max Resistive load\u003c\/li\u003e\n\u003cli\u003eLED: 200VA\u003c\/li\u003e\n\u003cli\u003eCompatible with dimmable LEDs, incandescent, and halogen bulbs and dimmable electronic transformers (for ELV systems)*\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRecommended wiring: 18AWG to 16AWG SOL\/STR copper conductor only\u003c\/li\u003e\n\u003cli\u003eMCU: ESP32-C3\u003c\/li\u003e\n\u003cli\u003eWi-Fi: IEEE 802.11b\/g\/n 2.4GHz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCertification: \u003cspan\u003eCE\/RoHS\u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 45x39.4x16.8mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e* Note that this switch is \u003cstrong\u003enot compatible\u003c\/strong\u003e with fluorescent lamps, CFLs, LED strips, and inductive loads (e.g., motors, fans). \u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cp\u003eCheck out the \u003ca rel=\"noopener\" href=\"https:\/\/help.sonoff.tech\/docs\/MINIDIM\" target=\"_blank\"\u003eSonoff knowledge centre\u003c\/a\u003e for technical details, compatibility, troubleshooting and setup tips.\u003c\/p\u003e\n\u003ch2\u003eWhat is Matter?\u003c\/h2\u003e\n\u003cp\u003eMatter is a modern smart home standard that makes it\u003cstrong\u003e easier for devices from different brands to work together reliably\u003c\/strong\u003e. Matter-certified devices like this one can be used across multiple platforms, including Home Assistant, Apple Home, Google Home and Alexa.\u003c\/p\u003e\n\u003cp\u003eMatter devices are \u003cstrong\u003edesigned to work locally\u003c\/strong\u003e on your home network, so they do not rely on the internet or a cloud service to function. This means faster response times, improved reliability and better privacy.\u003c\/p\u003e\n\u003cp\u003eInstead of using its own special radio tech like Zigbee or Z-Wave,\u003cstrong\u003e \u003c\/strong\u003eMatter \u003cstrong\u003eruns over standard home networking technologies\u003c\/strong\u003e like Wi-Fi, Ethernet, or Thread. This helps ensure long-term compatibility and makes it easier to mix and match smart home products from different manufacturers.\u003c\/p\u003e\n\u003cp\u003eWant to learn more? Check out the \u003ca href=\"https:\/\/buildwithmatter.com\"\u003eofficial Matter website\u003c\/a\u003e.\u003c\/p\u003e","brand":"Sonoff","offers":[{"title":"Default Title","offer_id":56279212228987,"sku":"MINI-DIM","price":20.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/MINI-DIM_Main_2286352d-286c-480d-a98c-7e858a9c30ae.png?v=1780494772"},{"product_id":"emf-explorer-badge","title":"EMF Explorer Badge Soldering Kit","description":"\u003cp\u003eThe world is full of invisible signals. This badge lets you hear them.\u003c\/p\u003e\n\u003cp\u003eHidden electromagnetic frequencies are all around us, and so much can be discovered through listening to these waves. The way that Bluetooth hardware sounds when it’s operating. How cell phones sound when they are transmitting data. What a laptop touchpad sounds like when it detects touch. The electronics world is invisibly emitting sounds around us all the time that we are mostly unaware of.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe beautifully detailed art on the completed PCB glows with the onboard LED, making it a great wearable badge even when you're not actively scanning\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eNo previous electronics experience is required to appreciate and use this badge, and it’s a great way to learn more about your world by exploring the different properties of our surroundings.\u003c\/p\u003e\n\u003cp style=\"padding: 0.5em; border: 2px solid orange;\"\u003ePlease note: Requires the use of a soldering iron and runs on two AAA batteries (not included). Suitable for ages 14 and up. Adult supervision recommended for younger builders.\u003c\/p\u003e\n\u003ch2\u003eKit includes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEMF Explorer PCB Board x1\u003c\/li\u003e\n\u003cli\u003e100pF Capacitor (Tan) x2\u003c\/li\u003e\n\u003cli\u003e10uF Capacitor (Blue) x2\u003c\/li\u003e\n\u003cli\u003e4.7uF Capacitor (Sm. Black) x2\u003c\/li\u003e\n\u003cli\u003e100mH Inductors (Lg. Black) x2\u003c\/li\u003e\n\u003cli\u003eLED x1\u003c\/li\u003e\n\u003cli\u003eIC Chip 2115D x1\u003c\/li\u003e\n\u003cli\u003e100k Resistors (Tan) x2\u003c\/li\u003e\n\u003cli\u003e100ohm Resistors (Blue) x3\u003c\/li\u003e\n\u003cli\u003eDPDT Slide Switch x1\u003c\/li\u003e\n\u003cli\u003e1\/8\" Stereo Jack x1\u003c\/li\u003e\n\u003cli\u003eAAA Battery Holders x2 (batteries are not included)\u003c\/li\u003e\n\u003cli\u003ePrinted assembly guide with component placement diagram and QR code linking to additional assembly resources\u003c\/li\u003e\n\u003cli\u003e... and a shiny sticker!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo build the kit you will need a soldering iron, \u003ca href=\"\/en-eu\/products\/ifixit-lead-free-solder\" target=\"_blank\"\u003esolder\u003c\/a\u003e, and \u003ca href=\"\/en-eu\/products\/precision-micro-nippers\" target=\"_blank\"\u003eclippers\u003c\/a\u003e. You'll also need 2 x AAA batteries and headphones (or something else with a 1\/8\" \/ 3.5mm audio plug) to listen to the sounds.\u003c\/p\u003e\n\u003ch2\u003eResources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cspan\u003e\u003ca href=\"https:\/\/www.youtube.com\/watch?v=gYrNhlrcNV4\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e\u003c\/span\u003e\u003ca href=\"https:\/\/sporklogic.com\/emfguide\/\" rel=\"noopener\" target=\"_blank\"\u003eAssembly guide (and more details about how the board works)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/sporklogic.com\/frequency-monitor\/\" rel=\"noopener\" target=\"_blank\"\u003eInteractive frequency monitor\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/heyzine.com\/flip-book\/0d224e911a.html\" rel=\"noopener\" target=\"_blank\"\u003eEMF Explorer Zine\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eExplore the Kicad files at the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/drc3p0\/emf-explorer-badge\"\u003eEMF Explorer Badge Github Repository\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/makezine.com\/projects\/electromagnetic-symphony-explore-the-emf-universe\/\" rel=\"noreferrer noopener\" target=\"_blank\"\u003eRead about the EMF Explorer badge in Make: Volume 90!\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SporkLogic","offers":[{"title":"Default Title","offer_id":56292226728315,"sku":"EMF-EXPLORER-KIT","price":23.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/emfbadgeinhand.png?v=1782210013"},{"product_id":"raspberry-pi-touch-display-2-10","title":"Raspberry Pi Touch Display 2 - 10.1\"","description":"\u003cp\u003eA large 10.1\" (1200 x 1920 pixel) multi-touch display for Raspberry Pi 5, ideal for interactive projects like tablets, entertainment systems and information dashboards.\u003c\/p\u003e\n\u003cp\u003eOn the 10\" display, Raspberry Pi OS provides built-in touchscreen drivers with support for ten-finger touch and an on-screen keyboard, giving you full functionality without the need to connect a keyboard or mouse.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOnly two connections are required to connect the display to your Raspberry Pi: a power cable for the GPIO header and a ribbon cable for the DSI port. The 10-inch variant is supplied with a power cable, a mini-mini ribbon cable, and eight M2.5 mounting screws.\u003c\/p\u003e\n\u003cp style=\"padding: 0.5em; border: 2px solid orange;\"\u003e\u003cmeta charset=\"utf-8\"\u003eThis display is \u003cstrong\u003ecompatible with Raspberry Pi 5 and Compute Modules only.\u003c\/strong\u003e It won't work with Raspberry Pi 1-4 or the Raspberry Pi Zero series.\u003c\/p\u003e\n\u003ch2\u003eContents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eTouch display\u003c\/li\u003e\n\u003cli\u003ePower cable\u003c\/li\u003e\n\u003cli\u003eMini-mini ribbon cable (for use with Raspberry Pi 5)\u003c\/li\u003e\n\u003cli\u003eM2.5 screws to attach your Raspberry Pi to back of the display\u003cmeta charset=\"utf-8\"\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRaspberry Pi 5 is not included\u003c\/strong\u003e (but you can buy one \u003ca rel=\"noopener\" href=\"\/en-eu\/products\/raspberry-pi-5\" target=\"_blank\"\u003ehere\u003c\/a\u003e)\u003c\/p\u003e\n\u003cp\u003eNote \u003ca rel=\"noopener\" href=\"\/en-eu\/products\/raspberry-pi-compute-module-5\" target=\"_blank\"\u003eRaspberry Pi Compute Modules\u003c\/a\u003e do not include a physical DSI port or GPIO header. To connect the display, pair them with a \u003ca rel=\"noopener\" href=\"\/en-eu\/products\/raspberry-pi-compute-module-5-io-board\" target=\"_blank\"\u003eRaspberry Pi Compute Module IO Board\u003c\/a\u003e or another compatible carrier board.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDisplay size (diagonal): 10.1 inches\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution: 1200 x 1920 pixels (portrait-native)\u003c\/li\u003e\n\u003cli\u003e85-degree viewing angle\u003c\/li\u003e\n\u003cli\u003eDisplay format: 24-bit RGB, \u003cmeta charset=\"utf-8\"\u003e1200 x 1920 pixels\u003c\/li\u003e\n\u003cli\u003eDisplay active area: 135.4mm x 216.6mm\u003c\/li\u003e\n\u003cli\u003eUnit size: 161.8 mm × 247.3 mm\u003c\/li\u003e\n\u003cli\u003eTouch panel: True multi-touch capacitive panel, supporting ten-finger touch\u003c\/li\u003e\n\u003cli\u003eCompatible with Raspberry Pi 5 and Compute Modules only.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.raspberrypi.com\/documentation\/accessories\/touch-display-2.html#connect-to-raspberry-pi\" target=\"_blank\"\u003eInstall guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/pip.raspberrypi.com\/documents\/RP-010276-MM-touch-display-2-10-inch-product-brief.pdf\" target=\"_blank\"\u003eProduct brief\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/www.raspberrypi.com\/news\/a-new-10-raspberry-pi-touch-display-2-available-now-at-80\/\" target=\"_blank\"\u003eLaunch blog post\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003cp\u003eNote that you will need the latest Raspberry Pi OS and bootloader for the screen to be autodetected. First, make sure your Pi OS is up to date by opening up a terminal (Ctrl-Alt-T) and running:\u003c\/p\u003e\n\u003cp\u003e\u003ccode\u003esudo apt update \u0026amp;\u0026amp; sudo apt full-upgrade\u003c\/code\u003e\u003c\/p\u003e\n\u003cp\u003eThen run the following to update your Pi 5's bootloader:\u003c\/p\u003e\n\u003cp\u003e\u003ccode\u003esudo rpi-eeprom-update -a\u003c\/code\u003e\u003c\/p\u003e","brand":"Raspberry Pi","offers":[{"title":"Default Title","offer_id":56334597325179,"sku":"SC2005","price":64.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/touchdisplay2-10.1.png?v=1784037899"},{"product_id":"pibow-frame-for-raspberry-pi-touch-display-2-10","title":"Pibow Frame for Raspberry Pi Touch Display 2 - 10.1\"","description":"\u003cp\u003eProtect your Raspberry Pi Touch Display 2 (10.1\") with this tidy desktop display frame!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3 layers provide support and protection to the back of the screen\u003c\/li\u003e\n\u003cli\u003e2 legs let you position the screen at a variety of viewing angles - landscape, portrait, standing up or reclining!\u003c\/li\u003e\n\u003cli\u003eTouchscreen left entirely unimpeded.\u003c\/li\u003e\n\u003cli\u003eAll Raspberry Pi ports accessible.\u003c\/li\u003e\n\u003cli\u003eLayers screw directly into the back of the screen with the stock fixings.\u003c\/li\u003e\n\u003cli\u003eAvailable in classic Noir Black or sporty Coupe Red colour ways.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003e\u003ca href=\"\/en-eu\/products\/raspberry-pi-touch-display-2-10\" rel=\"noopener\" target=\"_blank\"\u003eTouch Display 2\u003c\/a\u003e and \u003ca rel=\"noopener\" href=\"\/en-eu\/products\/raspberry-pi-5\" target=\"_blank\"\u003eRaspberry Pi\u003c\/a\u003e are \u003cstrong\u003enot\u003c\/strong\u003e included. This is the display mount only.\u003c\/p\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.pimoroni.com\/article\/assembling-pibow-frame-10\" target=\"_blank\" rel=\"noopener\"\u003eAssembling Pibow Frame for Touch Display 2 - 10.1\"\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNote that the 10.1\" Touch Display will only work with \u003ca href=\"\/en-eu\/products\/raspberry-pi-5\" rel=\"noopener\" target=\"_blank\"\u003eRaspberry Pi 5\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Coupé Red","offer_id":56363812258171,"sku":"PIM792","price":14.5,"currency_code":"GBP","in_stock":true},{"title":"Noir Black","offer_id":56363812290939,"sku":"PIM793","price":14.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/pibow-frame-10-lifestyle-1.jpg?v=1787316444"},{"product_id":"adafruit-rp2040-feather-thinkink-for-24-pin-e-paper-displays-stemma-qt","title":"Adafruit RP2040 Feather ThinkInk for 24-pin E-Paper Displays - STEMMA QT","description":"\u003cp\u003eEasy e-paper\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eand\u003cspan\u003e \u003c\/span\u003e\u003c\/em\u003eRP2040 finally come to your Feather with this \u003cstrong\u003eAdafruit RP2040 Feather Think Ink\u003c\/strong\u003e that's designed to make it a breeze to add almost any common e-Ink\/e-Paper display.\u003c\/p\u003e\n\u003cp\u003eChances are you've seen one of those new-fangled 'e-readers' like the Kindle or Nook. They have gigantic electronic paper 'static' displays - that means the image stays on the display even when power is completely disconnected. The image is also high contrast and very daylight readable. It really does look just like printed paper!\u003c\/p\u003e\n\u003cp\u003eWe've liked these displays for a long time, and we've got Arduino\/CircuitPython drivers for tons of the various display chipsets, so wouldn't an e-paper RP2040 Feather make a ton of sense? Luckily for us, just about every small-medium size EInk display made these days has a standard 24-pin connection. This Feather will add all the power supply support circuitry and level shifting so you can attach your favorite display - we've tested it with up to 5.6\" sized 7-color ACeP displays.\u003c\/p\u003e\n\u003cp\u003eSince all ePaper displays with the 24-pin interface require you to buffer the layers of data and write them all out at once over SPI, the RP2040 chip is an excellent driver. It has 264K of internal SRAM so even with the largest displays, there's plenty of memory to store all the image data plus run your own code. We also put the display on it's own SPI port so that the Feather's main SPI port can be used for other peripheral devices.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes not come with an EInk display or extension cable!\u003c\/strong\u003e For use with just about any EInk display with a 24-pin FPC connector. \u003ca href=\"https:\/\/learn.adafruit.com\/assets\/57645\"\u003eSee these schematics to verify that your display matches before purchasing\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eFeather is the development board specification from Adafruit, and like its namesake, it is thin, light, and lets you fly! We designed Feather to be a new standard for portable microcontroller cores. \u003ca href=\"\/en-eu\/collections\/feather\" target=\"_blank\"\u003eWe have other boards in the Feather family, check'em out here\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eAt the Feather's heart is an RP2040 chip, clocked at 133 MHz and at 3.3V logic, the same one used in the \u003ca href=\"\/en-eu\/products\/raspberry-pi-pico\" target=\"_blank\"\u003eRaspberry Pi Pico\u003c\/a\u003e. This chip has a whopping MB of onboard QSPI FLASH and 264K of RAM!  There's even room left over for a STEMMA QT connector for plug-and-play of I2C devices.\u003c\/p\u003e\n\u003cp\u003eTo make it easy to use for portable projects, we added a connector for any of our 3.7V Lithium polymer batteries and built-in battery charging. You don't need a battery, it will run just fine straight from the USB Type C connector. But, if you do have a battery, you can take it on the go, then plug in the USB to recharge. The Feather will automatically switch over to USB power when it's available. While the RP2040 is not designed for low power usage - you can get down to about 1.5mA of power draw in sleep mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHere're some handy specs! You get:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMeasures 2.0\" x 0.9\" x 0.28\" (50.8mm x 22.8mm x 7mm) without headers soldered in\u003c\/li\u003e\n\u003cli\u003eLight as a (large?) feather - 6.3 grams\u003c\/li\u003e\n\u003cli\u003eRP2040 32-bit Cortex M0+ dual core running at ~133 MHz @ 3.3V logic and power\u003c\/li\u003e\n\u003cli\u003e264 KB RAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e8 MB SPI FLASH\u003c\/strong\u003e chip for storing files, images and CircuitPython\/MicroPython code storage. No EEPROM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTons of GPIO! 21 x GPIO pins with following capabilities:\u003c\/strong\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFour \u003c\/strong\u003e12-bit ADCs (one more than Pico)\u003c\/li\u003e\n\u003cli\u003eTwo I2C, Two SPI, and two UART peripherals, we label one for the 'main' interface in standard Feather locations\u003c\/li\u003e\n\u003cli\u003e16 x PWM outputs - for servos, LEDs, etc\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in 200mA+ lipoly charger\u003c\/strong\u003e with charging status indicator LED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePin #13 red LED \u003c\/strong\u003efor general purpose blinking\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRGB NeoPixel\u003c\/strong\u003e for full-color indication.\u003c\/li\u003e\n\u003cli\u003eOn-board \u003cstrong\u003eSTEMMA QT connector\u003c\/strong\u003e that lets you quickly connect any Qwiic, STEMMA QT or Grove I2C devices with no soldering!\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBoth Reset button and Bootloader select button for quick restarts \u003c\/strong\u003e(no unplugging-replugging to relaunch code)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB Type C connector \u003c\/strong\u003elets you access built-in ROM USB bootloader and serial port debugging\u003c\/li\u003e\n\u003cli\u003e3.3V regulator with 500mA peak current output and power enable pin\u003c\/li\u003e\n\u003cli\u003e4 mounting holes\u003c\/li\u003e\n\u003cli\u003e12 MHz crystal for perfect timing.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupport circuitry for common 24-pin e-Paper\/e-Ink displays\u003c\/strong\u003e. These tend to be 1.54\" to 7\" diagonal and designed for 'smart labels'. No soldering required, simply plug in the display to the FPC connector on the end and load up your code. Not for use with the larger resolution displays on e-Readers like Kindles. Those use a different interface!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eComes assembled and tested, with some header. You'll need a soldering iron to attach the header for installing onto your Feather. Stacking headers will let you put another FeatherWing on top.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-rp2040-feather-thinkink\"\u003ePrimary Guide: Adafruit Feather RP2040 ThinkInk\u003c\/a\u003e\nBuild e-Ink projects in a blink with the Feather RP2040 ThinkInk\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/bare-e-ink-displays-crash-course\"\u003eBare E-Ink Displays Crash Course\u003c\/a\u003e\nWhat's the deal with all of these eInk displays?\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/5727\/guides\" target=\"_blank\" rel=\"noopener\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56387107291515,"sku":"ADA5727","price":13.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/5727-00.jpg?v=1787234397"},{"product_id":"adabox-022-fruit-jam-mini-computer-kit","title":"ADABOX 022 - Fruit Jam Mini-Computer Kit","description":"\u003cp\u003eThis ADABOX takes its inspiration from our childhoods-weekends spent with computers like the Apple ] [, 286 PC, ZX Spectrum, Commodore 64, Mac Plus, and TRS-80. \u003c\/p\u003e\n\u003cp\u003eThese machines plugged into TVs and blazed our eyes with 8-bit glory as we played games, typed in programs from magazines, and patiently waited our turn while siblings loaded the latest software from cartridges or floppies. We didn't mind the limited memory, chunky graphics, or bleepy tunes-it was a self-contained electronic wonderland that could do almost anything.\u003c\/p\u003e\n\u003cp\u003eWe turned those memories into a new design we call\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/adafruit-fruit-jam-mini-rp2350-computer\" target=\"_blank\" rel=\"noopener\"\u003eFruit Jam\u003c\/a\u003e. Inspired by IchigoJam DIY computer kit, this credit-card-sized computer drives an HDMI monitor and mini speaker, with USB keyboard and mouse input. But instead of running macOS, Windows, or Linux, it's programmable directly-like a microcontroller. That means you can write your own games and apps using interpreted Python scripts that live on the built-in 16MB flash disk-no complex APIs or compilers required.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAs always, we thank\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.digikey.com\/en\/resources\/about-digikey\"\u003eDigiKey\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003efor their unending support. This year has been a rollercoaster managing tariffs and inventory, and DigiKey has been a rock-solid partner in sourcing and logistics.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWho is this for?\u003c\/strong\u003e\u003cbr\u003eAnyone who is interested in learning how to program and build interactive projects, and with access to a modern web browser. That's pretty much the minimum. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eYou don't need to know a lot of physics or math\u003c\/strong\u003e, and just like an Art Degree isn't required for making art and being creative, \u003cstrong\u003eyou \u003cem\u003edon't\u003c\/em\u003e need to have a computer science or mechanical engineering degree\u003c\/strong\u003e. It helps if you're comfortable using computers but that's a skill most people pick up through life.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIf you know how to program already - great! If not, don't worry, we'll teach you enough to be dangerous, yet effective!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIncludes:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/adafruit-fruit-jam-mini-rp2350-computer\" target=\"_blank\" rel=\"noopener\"\u003eAdafruit Fruit Jam\u003c\/a\u003e, Fruit Jam Protective Top Plate \u0026amp; Hardware Kit and\u003cspan\u003e \u003c\/span\u003eMini 8 Ohm Speaker\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/1736\"\u003eUSB Keyboard\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/2025\"\u003eUSB Mouse\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/6285\"\u003eUSB Gamepad\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eVisit\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adabox022\"\u003elearn.adafruit.com\/adabox022\u003c\/a\u003e for AdaBox tutorials.\u003c\/p\u003e\n\u003cp\u003eVisit \u003ca rel=\"noopener noreferrer\" href=\"http:\/\/forums.adafruit.com\/adabox\" target=\"_blank\"\u003eforums.adafruit.com\/adabox\u003c\/a\u003e to discuss your projects.\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adabox022\"\u003ePrimary Guide: AdaBox 022\u003c\/a\u003e Explore and use the contents of your AdaBox 022\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6429\/guides\" target=\"_blank\" rel=\"noopener\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56387153133947,"sku":"ADA6429","price":46.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6429-02.png?v=1787235660"},{"product_id":"adafruit-eyespi-pi-beret-buttons-eyespi-and-stemma-qt","title":"Adafruit EYESPI Pi Beret - Buttons, EYESPI and STEMMA QT","description":"\u003cp\u003eThis slim Raspberry Pi HAT gives you lots of hardware connection options.\u003c\/p\u003e\n\u003cp\u003eRaspberry Pi's make for handy lil computers, but they're really wonderful when you can connect all sorts of nifty hardware to them: color TFT or E-Ink displays, and sensors are our go-to favorites. Even better is when we make it fast and effortless to wire these up. With this new EYESPI Pi Beret there's no more counting pins or noodling with a breakout board.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.raspberrypi.com\/news\/introducing-raspberry-pi-hats\/\"\u003eThis slim HAT\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eplugs in and gives you lots of hardware connection options so that many projects become plug-and-play.\u003c\/p\u003e\n\u003cp\u003eOur most recent \u003ca href=\"\/en-eu\/collections\/eyespi\" target=\"_blank\" rel=\"noopener\"\u003edisplay breakouts have come with a new feature: an 18-pin \"EYE SPI\" standard FPC connector with flip-top connector\u003c\/a\u003e. This is intended to be a sort-of \"\u003ca href=\"https:\/\/learn.adafruit.com\/introducing-adafruit-stemma-qt\"\u003eSTEMMA QT\u003c\/a\u003e for displays\" - a way to quickly connect and extend display wiring that uses a lot of SPI pins. In this case we need a lot of SPI and accessory pins, and we want to be able to use long distances, so we go with an 18-pin 0.5mm pitch FPC.\u003c\/p\u003e\n\u003cp\u003eWith such a slim and flexible cable, it's easy to have displays anywhere\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/adafruit-pitft-plus-320x240-2-8-tft-capacitive-touchscreen\" target=\"_blank\" rel=\"noopener\"\u003ewithout them physically attached to the Pi like in our PiTFTs\u003c\/a\u003e. Accessorize with big bold colorful displays or power-sipping E-Ink. \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDon't forget you'll also want an \u003ca href=\"\/en-eu\/products\/eyespi-cable-18-pin-flex-pcb-fpc-a-b-type\" target=\"_blank\" rel=\"noopener\"\u003e18-pin EYESPI FPC cable\u003c\/a\u003e. And of course \u003ca href=\"\/en-eu\/collections\/eyespi\" target=\"_blank\" rel=\"noopener\"\u003eone of our EYESPI displays\u003c\/a\u003e too -\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003elook for the EYESPI logo on the back to know you've got one that can clip in.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMOSI\/MISO\/SCK\u003c\/strong\u003e SPI pins are connected to the default\u003cstrong\u003e SPI \u003c\/strong\u003eport on the Raspberry Pi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSDA\/SCL\u003c\/strong\u003e I2C pins are connected to the default \u003cstrong\u003eI2C\u003c\/strong\u003e port on the Pi\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay CS \u003c\/strong\u003eon Raspberry Pi \u003cb\u003eCE 0\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay DC \u003c\/strong\u003eon Raspberry Pi\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eGPIO #25\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDisplay Reset \u003c\/b\u003eon Raspberry Pi\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eGPIO #27\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDisplay Busy \u003c\/b\u003eon Raspberry Pi\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eGPIO #17 \u003c\/b\u003e(used for E-Inks)\u003c\/li\u003e\n\u003cli\u003e\n\u003cb\u003eDisplay Backlight \u003c\/b\u003eon Raspberry Pi\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eGPIO #18 \u003c\/b\u003e(there's a jumper to cut\/disable this if you want to use the PWM output for other uses like NeoPixels)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch CS \u003c\/strong\u003eon Raspberry Pi \u003cb\u003eCE 1\u003c\/b\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch IRQ \u003c\/strong\u003eon Raspberry Pi\u003cspan\u003e \u003c\/span\u003e\u003cb\u003eGPIO #24\u003c\/b\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe remaining EYESPI pins are not connected, leaving you with plenty of GPIO for other accessory boards.\u003c\/p\u003e\n\u003cp\u003eWe also have a Stemma QT connector for the I2C port, to make connecting all sorts of Qwiic\/Stemma QT devices super easy, two tactile switches on GPIO #5 and #6 and a slide switch on GPIO #13 which you can use for any sort of interface project or configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDisplay and EYESPI cable are not included\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003eProduct Dimensions: 64.8mm x 15.0mm x 9.7mm \/ 2.6\" x 0.6\" x 0.4\"\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 5.4g \/ 0.2oz\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/eyespi-pi-beret\"\u003ePrimary Guide: Adafruit EYESPI Pi Beret\u003c\/a\u003e\n\u003cdiv class=\"product-learn-guide-tagline\"\u003eAdd an EYESPI display to your Pi with this jaunty Beret!\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-1-28-240x240-round-tft-lcd\"\u003eAdafruit 1.28\" 240x240 Round TFT LCD\u003c\/a\u003e\n'Round and 'round and 'round...\n\u003c\/li\u003e\n\u003cli\u003e\n\n\u003ca href=\"https:\/\/learn.adafruit.com\/raspberry-pi-thermal-camera\"\u003eRaspberry Pi Thermal Camera\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/5783\/guides\" rel=\"noopener\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56390657180027,"sku":"ADA5783","price":4.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/5783-04.jpg?v=1787581721"},{"product_id":"adafruit-1-28-240x240-round-tft-lcd-display-with-microsd-gc9a01a-with-eyespi-connector","title":"Adafruit 1.28\" 240x240 Round TFT LCD Display with MicroSD - GC9A01A with EYESPI Connector","description":"\u003cp\u003e'Round these parts we enjoy unusually-shaped displays. And this one certainly fits the description - it's a 1.28\" diagonal TFT that comes in a round shape and contains a high density 220 ppi, 240x240 pixel RGB display with full-angle viewing.\u003c\/p\u003e\n\u003cp\u003eIt\u003cspan\u003e \u003c\/span\u003e\u003cem\u003elooks\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ea lot like our\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/adafruit-1-54-240x240-wide-angle-tft-lcd-display-with-microsd-st7789\" rel=\"noopener\" target=\"_blank\"\u003e1.54\" 240x240 square display\u003c\/a\u003e, but with the edges beveled off.  We've seen displays like this often used in smartwatches and small electronic devices but they've always been MIPI interface. Finally, we found one that is SPI and has a friendly display driver, so it works with any and all microcontrollers or microcomputers!\u003c\/p\u003e\n\u003cp\u003eThis lovely little display breakout is the best way to add a small, round, colorful and very bright display to any project. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller. Even a very small one with low memory and few pins available! The 1.28\" display has 240x240 16-bit full color pixels and is an\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eIPS\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003edisplay, so the color looks great up to 80 degrees off axis in any direction. The TFT driver (GC9A01A) is very similar to the popular ST7789,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_GC9A01A\"\u003eand our Arduino library supports it well\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThe breakout has the TFT display soldered on (it uses a delicate flex-circuit connector) as well as an ultra-low-dropout 3.3V regulator, auto-reset circuitry, and a 3\/5V level shifter so you can use it with 3.3V or 5V power and logic. We also had a little extra space, so we placed a microSD card holder so you can easily load full color bitmaps from a FAT16\/FAT32 formatted microSD card. The microSD card is not included, \u003ca href=\"\/en-eu\/products\/generic-microsd-card-with-raspberry-pi-os\" rel=\"noopener\" target=\"_blank\"\u003ebut you can pick one up here\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eOf course, we wouldn't just leave you with a datasheet and a \"good luck!\" - \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_GC9A01A\"\u003ewe've written a full open-source graphics Arduino library that can draw pixels, lines, rectangles, circles, text, and bitmaps as well as example code\u003c\/a\u003e. The code is written for Arduino but can be easily ported to your favorite microcontroller! Wiring is easy, we strongly encourage using the hardware SPI pins of your Arduino as software SPI is noticeably slower when dealing with this size display.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_CircuitPython_RGB_Display\"\u003eFor Raspberry Pi or other Single Board Computer Python users, we have a user-space Pillow-compatible library\u003c\/a\u003e. For\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/tylercrumpton\/CircuitPython_GC9A01\"\u003eCircuitPython there's a contributed displayio driver for native support\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eThis display breakout also features a\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/collections\/eyespi\" rel=\"noopener\" target=\"_blank\"\u003e18-pin \"EYESPI\" standard FPC connector\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ewith flip-top connector.\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/eyespi-cable-18-pin-flex-pcb-fpc-a-b-type\" rel=\"noopener\" target=\"_blank\"\u003eYou can use a 18-pin 0.5mm pitch FPC cable\u003c\/a\u003e\u003cstrong\u003e (not included!) \u003c\/strong\u003eto connect to all the GPIO pins, for when you want to skip the soldering.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1.28\" LCD TFT display\u003c\/li\u003e\n\u003cli\u003eBuilt-in microSD slot \u003c\/li\u003e\n\u003cli\u003e1x16 header for easy breadboarding\u003c\/li\u003e\n\u003cli\u003e2 x 0.1\" \/ 2.5mm mounting holes\u003c\/li\u003e\n\u003cli\u003eLCD screen dimensions: 38.1mm x 35.6mm\u003c\/li\u003e\n\u003cli\u003eOverall dimensions: 42.4mm x 36.2mm x 5.4mm\u003c\/li\u003e\n\u003cli\u003eMounting hole distance: 22.8mm  \/ 0.9\"\u003c\/li\u003e\n\u003cli\u003eWeight (assembled): 8.3g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6178\/round+TFT+1.28in+GC9A01.png\"\u003eTFT Display Datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e \u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-1-28-240x240-round-tft-lcd\"\u003ePrimary Guide: Adafruit 1.28\" 240x240 Round TFT LCD\u003c\/a\u003e 'Round and 'round and 'round...\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/learn.adafruit.com\/cartoon-character-clock\"\u003eCartoon Character Clock\u003c\/a\u003e Keep track of the time with graphics and jingles from an iconic cartoon.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/qt-py-s2-round-display-compass\"\u003eQT Py S2 Round Display Compass\u003c\/a\u003e Figure out which way you're heading with CircuitPython this compass.\u003c\/li\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/learn.adafruit.com\/asteroid-tracker\"\u003eAsteroid Tracker\u003c\/a\u003e Keep track asteroids with a lovely round display\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6178\/guides\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56390702793083,"sku":"ADA6178","price":13.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6178-05.png?v=1787583390"},{"product_id":"adafruit-ads7128-8-channel-adc-and-gpio-expander","title":"Adafruit ADS7128 8-Channel ADC and GPIO Expander - STEMMA QT \/ Qwiic","description":"\u003cp\u003eThe \u003cstrong\u003eAdafruit ADS7128 8-Channel ADC and GPIO Expander\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eis a bit of a Platypus of the I2C expander world: hard to categorize as just an ADC or a GPIO expander since it combines the capabilities of both with great capabilites! Usually, you only get ADC or I\/O so it's nice to see this combo product.\u003c\/p\u003e\n\u003cp\u003eFeaturing the aforementioned ADS7128, it can run on 3.3 or 5V logic and power, and all 8 I\/O pins can individually configured to perform either 12-bit SAR analog input, push-pull or open drain digital output, or digital input. This makes it great as a general-purpose glue chip when you want to add more pins or analog\/open-drain outputs to a microcontroller or microcomputer.\u003c\/p\u003e\n\u003cp\u003eThe ADS7128 also has a lot of fancy extras that make it a good ADC companion even if your main core already has analog inputs. It can run in standalone mode with zero-crossing detection or RMS computation. Not only can it count and track threshold crossings, but it also has an alert trigger output. \u003c\/p\u003e\n\u003cp\u003eUnlike many ADC\/expanders, it has two power supplies: the DVDD digital supply and AVDD analog supply are separate so you can use 3V logic for the digital I\/O and I2C communications while the analog inputs and digital outputs can be as high as 5V. Or vice versa!\u003c\/p\u003e\n\u003cp\u003eInterfacing is easy - this sensor uses plain, universal I2C. We put this sensor on a breakout board with all the extras needed so you can use it with 3.3V or 5V power\/logic microcontrollers. \u003ca href=\"https:\/\/github.com\/adafruit\/?q=ads7128\u0026amp;type=all\u0026amp;language=\u0026amp;sort=\"\u003eWe have written libraries for Arduino (C\/C++) as well as CircuitPython (Python 3) \u003c\/a\u003eso you can use this sensor with just about any kind of device, even a Raspberry Pi!\u003c\/p\u003e\n\u003cp\u003eAs if that weren't enough, we've also added\u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003e SparkFun qwiic\u003c\/a\u003e compatible \u003cstrong\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/introducing-adafruit-stemma-qt\"\u003eSTEMMA QT\u003c\/a\u003e\u003c\/strong\u003e connectors for the I2C bus \u003cstrong\u003eso you don't even need to solder.\u003c\/strong\u003e Just wire up to your favorite micro with a plug-and-play cable to get analog inputs and digital I\/Os ASAP. For a no-solder experience, \u003ca href=\"\/en-eu\/products\/adafruit-esp32-feather-v2-8mb-flash-2-mb-psram-stemma-qt\" target=\"_blank\" rel=\"noopener\"\u003ejust wire up to your favorite micro, like the ESP32 V2  Feather\u003c\/a\u003e using a \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible\" target=\"_blank\" rel=\"noopener\"\u003eSTEMMA QT adapter cable.\u003c\/a\u003e The Stemma QT connectors also mean the ADS7128 can be used with our \u003ca href=\"\/en-eu\/collections\/qw-st\" target=\"_blank\" rel=\"noopener\"\u003evarious associated accessories.\u003c\/a\u003e \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible\" target=\"_blank\" rel=\"noopener\"\u003eQT Cable is not included, but we have a variety in the shop\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eADS7128 Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.ti.com\/product\/ADS7128\"\u003eDatasheet \u0026amp; Product Info\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e8 channels configurable as any combination of:\u003cbr\u003eUp to 8 analog inputs, digital inputs, or digital outputs\u003c\/li\u003e\n\u003cli\u003eGPIOs for I\/O expansion:\u003cbr\u003eOpen-drain, push-pull digital outputs\u003c\/li\u003e\n\u003cli\u003eAnalog watchdog:\u003cbr\u003eProgrammable thresholds per channel\u003cbr\u003eEvent counter for transient rejection\u003c\/li\u003e\n\u003cli\u003eWide operating ranges:\u003cbr\u003eAVDD: 2.35 V to 5.5 V\u003cbr\u003eDVDD: 1.65 V to 5.5 V\u003cbr\u003e-40°C to +85°C temperature range\u003c\/li\u003e\n\u003cli\u003eCRC for read\/write operations:\u003cbr\u003eCRC on data read\/write\u003cbr\u003eCRC on power-up configuration\u003c\/li\u003e\n\u003cli\u003eI2C interface:\u003cbr\u003eUp to 3.4 MHz (high-speed mode)\u003cbr\u003e8 configurable I2C addresses\u003c\/li\u003e\n\u003cli\u003eProgrammable averaging filters\u003c\/li\u003e\n\u003cli\u003eRoot-mean-square module:\u003cbr\u003e16-bit true RMS output\u003cbr\u003eProgrammable RMS time window\u003c\/li\u003e\n\u003cli\u003eZero-crossing-detect module:\u003cbr\u003eZCD output corresponding to any analog input\u003cbr\u003eBuilt-in transient rejection and hysteresis\u003cbr\u003eDigitally adjustable detection threshold\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 30.5mm x 17.8mm x 4.7mm \/ 1.2\" x 0.7\" x 0.2\"\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 2.1g \/ 0.1oz\u003c\/p\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-ads7128-8-channel-adc-and-gpio-expander\"\u003ePrimary Guide: Adafruit ADS7128 8-Channel ADC and GPIO Expander\u003c\/a\u003e\nA Platypus of the I2C expander world\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6494\/guides\" target=\"_blank\" rel=\"noopener\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56390751814011,"sku":"ADA6494","price":11.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6494-00.png?v=1787585917"},{"product_id":"adafruit-max44009-wide-range-lux-light-sensor-188-000-lux-max-stemma-qt-qwiic","title":"Adafruit MAX44009 Wide-range Lux Light Sensor - 188,000 Lux Max - STEMMA QT \/ Qwiic","description":"\u003cp\u003eThis is an easy to use lux sensor, and features an ultra-wide 22-bit dynamic range from 0.045 lux to 188,000 lux.\u003c\/p\u003e\n\u003cp\u003eThat means you can use the\u003cstrong\u003e Adafruit MAX44009 Wide-range Lux Sensor \u003c\/strong\u003ein darkness or in bright outdoors sun, without having to tweak the integration time or gain: the sensor will auto-range for you so you get smooth readings no matter the light level.\u003c\/p\u003e\n\u003cp\u003eMost light sensors just give you a number for brighter\/darker ambient lighting. The MAX44009 makes your life easier by calculating the lux, which is an SI unit for light. You'll get more consistent readings between multiple sensors because you aren't dealing with some unit-less values.\u003c\/p\u003e\n\u003cp\u003eThe sensor has 22-bit dynamic range for ambient light detection from 0.045 lux to about 188 klux with resolution down to  0.045 per least-significant-bit. It does come with software-adjustable integration times, or you can have it auto-range for you.\u003c\/p\u003e\n\u003cp\u003eInterfacing is easy - this sensor uses plain, universal I2C. We put this sensor on a breakout board with a 3.3V regulator and logic level shifter so you can use it with 3.3V or 5V power\/logic microcontrollers. \u003ca href=\"https:\/\/github.com\/adafruit\/?q=max44009\u0026amp;type=all\u0026amp;language=\u0026amp;sort=\"\u003eWe have written libraries for Arduino (C\/C++) as well as CircuitPython (Python 3) \u003c\/a\u003eso you can use this sensor with just about any kind of device, even a Raspberry Pi!\u003c\/p\u003e\n\u003cp\u003eAs if that weren't enough, we've also added\u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003e SparkFun qwiic\u003c\/a\u003e compatible \u003cstrong\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/introducing-adafruit-stemma-qt\"\u003eSTEMMA QT\u003c\/a\u003e\u003c\/strong\u003e connectors for the I2C bus \u003cstrong\u003eso you don't even need to solder.\u003c\/strong\u003e Just wire up to your favorite micro with a plug-and-play cable to get lux data ASAP. For a no-solder experience, \u003ca href=\"\/en-eu\/products\/adafruit-esp32-feather-v2-8mb-flash-2-mb-psram-stemma-qt\" target=\"_blank\" rel=\"noopener\"\u003ejust wire up to your favorite micro, like the ESP32 V2  Feather\u003c\/a\u003e using a \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible\" target=\"_blank\" rel=\"noopener\"\u003eSTEMMA QT adapter cable.\u003c\/a\u003e The Stemma QT connectors also mean the MAX44009 can be used with our \u003ca href=\"\/en-eu\/collections\/qw-st\" target=\"_blank\" rel=\"noopener\"\u003evarious associated accessories.\u003c\/a\u003e \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible\" target=\"_blank\" rel=\"noopener\"\u003eQT Cable is not included, but we have a variety in the shop\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-max44009-lux-light-sensor\"\u003ePrimary Guide: Adafruit MAX44009 Lux Light Sensor\u003c\/a\u003e\nEasily measure light levels with the MAX44009 lux sensor.\n\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/sensor-locked-secrets-with-circuitpython\"\u003eSensor-Locked Secrets with CircuitPython\u003c\/a\u003e\nEncrypt a secret message using environmental sensor readings as the key.\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6498\/guides\" target=\"_blank\" rel=\"noopener\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56394827137403,"sku":"ADA6498","price":9.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6498-00.png?v=1788525642"},{"product_id":"adafruit-apds9999-proximity-lux-light-color-sensor-stemma-qt-qwiic","title":"Adafruit APDS9999 Proximity, Lux Light \u0026 Color Sensor - STEMMA QT \/ Qwiic","description":"\u003cp\u003eIf you want a sensor that's a 3-in-1, the \u003cstrong\u003eAdafruit APDS9999 Proximity, Lux Light, and Color Sensor\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ehas RGB color, lux light level as well as infrared proximity all built into one device.\u003c\/p\u003e\n\u003cp\u003eWhen connected to your microcontroller (running our library code), it can detect the amount of red, blue, green, and clear light, as well as how close an object is to the front of the sensor. This device uses an I2C interface, so it's easy to wire up and use.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ethat this chip is considered by Broadcom to be the 'successor'\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/adafruit-apds9960-proximity-light-rgb-and-gesture-sensor\" target=\"_blank\" rel=\"noopener\"\u003eto the APDS-9960\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ewhich has technically been discontinued, but it does\u003cspan\u003e \u003c\/span\u003e\u003cem\u003enot\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003ehave gesture sensing! It does have true Lux sensing though, not just light counts.\u003c\/p\u003e\n\u003cdiv class=\"row-fluid build-text\"\u003e\n\u003cp\u003eThe proximity sensing bounces IR light, it isn't a time-of-flight sensor, so it doesn't give you exact distances, just how much light has reflected. It's best for short distances, 2 inches \/ 50mm or less, but can detect objects up to 150mm away. The APDS9999 also has a configurable interrupt pin that can trigger when a specified proximity threshold is crossed or when a color sensor threshold is exceeded.\u003c\/p\u003e\n\u003cdiv class=\"row-fluid build-text\"\u003e\n\u003cp\u003eFor your convenience, we've pick-and-placed the sensor on a PCB with a 3.3V regulator and some level shifting so it can be easily used with your favorite 3.3V\u003cspan\u003e \u003c\/span\u003e\u003cem\u003eor\u003c\/em\u003e\u003cspan\u003e \u003c\/span\u003e5V microcontroller. We've included\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eSparkFun qwiic\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ecompatible\u003cstrong\u003e \u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/introducing-adafruit-stemma-qt\" target=\"_blank\"\u003eSTEMMA QT\u003c\/a\u003e\u003c\/strong\u003e connectors for the I2C bus, so\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eyou don't even need to solder!\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/collections\/qw-st\" target=\"_blank\" rel=\"noopener\"\u003eJust wire up to your favorite microcontroller or computer with a plug-and-play QT cable\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto light\/color\/proximity data ASAP. \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eQT Cable is not included\u003c\/strong\u003e, but we have a variety in the shop\u003c\/a\u003e. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_APDS9999\"\u003eWe've also prepared a guide and software library to get you up and running in Arduino IDE with just a few lines of code!\u003c\/a\u003e\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eAPDS-9999 Specifications\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRGB and ambient light sensing (RGB and ALS)\u003cbr\u003e– Accuracy of correlated color temperature (CCT)\u003cbr\u003e– Individual channels for red, green, blue, and infrared\u003cbr\u003e– Approximates human eye response with green channel\u003cbr\u003e– Uses optical coating technology to emulate human eye spectral response\u003cbr\u003e– Works well under different light source conditions\u003cbr\u003e– Low-light sensitivity; operates behind darkened glass\u003cbr\u003e– 50 Hz\/60 Hz light flicker immunity\u003cbr\u003e– Fluorescent light flicker immunity\u003cbr\u003e– Programmable interrupt function with upper, lower thresholds and persists function\u003cbr\u003e– Programmable ALS integration time\u003cbr\u003e– Programmable ALS gain setting\u003c\/li\u003e\n\u003cli\u003eProximity detection (PS)\u003cbr\u003e– 940-nm vertical cavity surface emitting laser (VCSEL)\u003cbr\u003e– Programmable VCSEL drive current\u003cbr\u003e– Cancellation of crosstalk\u003cbr\u003e– Ambient light suppression\u003cbr\u003e– Programmable interrupt function with upper and lower thresholds and persists function\u003cbr\u003e– Programmable persists function\u003c\/li\u003e\n\u003cli\u003eIEC 60825-1 Class 1 Laser Eye Safety\u003c\/li\u003e\n\u003cli\u003ePower management\u003cbr\u003e– Low active current\u003cbr\u003e– Low standby current\u003c\/li\u003e\n\u003cli\u003eI2C interface compatible\u003cbr\u003e– Up to 400 kHz (I2C fast-mode)\u003cbr\u003e– Dedicated interrupt pin\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-max44009-lux-light-sensor\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"product-learn-guide-title\"\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-max44009-lux-light-sensor\"\u003e\u003c\/a\u003e\n\u003cdiv\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-max44009-lux-light-sensor\"\u003e\u003c\/a\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-apds9999-proximity-lux-light-color-sensor\"\u003ePrimary Guide: Adafruit APDS9999 Proximity, Lux Light \u0026amp; Color Sensor\u003c\/a\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"product-learn-guide-tagline\"\u003eAdafruit APDS9999 Proximity, Lux Light, and Color Sensor has RGB color, lux light level as well as infrared proximity.\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6461\/guides\" rel=\"noopener\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56404820132219,"sku":"ADA6461","price":5.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6461-00.png?v=1788527238"},{"product_id":"adafruit-as7343-14-channel-light-color-sensor-breakout-stemma-qt-qwiic","title":"Adafruit AS7343 14-Channel Light \/ Color Sensor Breakout - STEMMA QT \/ Qwiic","description":"\u003cp\u003eThe\u003cstrong\u003e Adafruit AS7343 14-Channel Light \/ Color Sensor Breakout\u003c\/strong\u003e is a multi-channel spectrometer, which is a special type of light sensor that is able to detect not only the amount of light present but also the amounts of light within different wavelengths.\u003c\/p\u003e\n\u003cp\u003eThis means that you can use it to detect much better than the human eye is capable of, what color or colors of light is present.\u003c\/p\u003e\n\u003cp\u003eThe AS7343 packs within its 3x2mm footprint 25 photodiodes that can detect 11 separate, overlapping bands of visible light, plus one near infrared, one clear and a flicker channel for 14 channels total. Compared to the AS7341, this sensor has 4 more light channels - but you'll need to use a new firmware driver since its not back-compatible.\u003c\/p\u003e\n\u003cp\u003eThe multi-spectral color measuring capabilities of the AS7343 can be used to quantify the specific makeup of light, either emitted or reflective. It's kind of like a mini spectroscopy sensor. This is possible thanks to the impressive collection of sensors in the AS7343 being routed through a 16-bit 6-channel ADC that takes the raw measurements and converts them to digital values that can be read out over I2C.\u003c\/p\u003e\n\u003cp\u003e14 readable individual sensor elements (13 light channels plus flicker detection) don’t exactly fit through a 6-channel ADC all at once, so the chip includes a so-called Super MUX (SMUX) that allows you to route the signal from any sensor to any ADC channel. The sensor also has GPIO and interrupt pins that can allow it to communicate directly with other sensors, or the microcontroller itself.\u003c\/p\u003e\n\u003cp\u003eAll of this capability is made accessible by mounting the sensor on a STEMMA QT form factor breakout board, complete with level shifting circuitry and \u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eSparkFun Qwiic\u003c\/a\u003e compatible \u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/introducing-adafruit-stemma-qt\" target=\"_blank\"\u003eStemma QT\u003c\/a\u003e connectors. This means that you can, without needing to solder, connect our AS7343 breakout into your 3.3V or 5V microcontroller of choice be it an Arduino Uno, Raspberry Pi, or one of the many \u003ca rel=\"noopener\" href=\"https:\/\/circuitpython.org\/downloads\" target=\"_blank\"\u003eCircuitPython-compatible boards\u003c\/a\u003e. While it certainly takes a bit of work to make all those different light sensors share their measurements, our Arduino and CircuitPython libraries take care of all of that hard work for you and even include example code to help get you started. \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eQT Cable is not included\u003c\/strong\u003e, but we have a variety in the shop\u003c\/a\u003e.\u003c\/p\u003e\n\u003cdiv class=\"row-fluid build-text\"\u003e\n\u003cdiv class=\"row-fluid build-text\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eTechnical Details\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-max44009-lux-light-sensor\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"product-learn-guide-title\"\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-max44009-lux-light-sensor\"\u003e\u003c\/a\u003e\n\u003cdiv\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-max44009-lux-light-sensor\"\u003e\u003c\/a\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv class=\"product-learn-guide-title\"\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-as7343-14-channel-light-color-sensor-breakout\"\u003ePrimary Guide: Adafruit AS7343 14-Channel Light \/ Color Sensor Breakout\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-learn-guide-tagline\"\u003eDetect and measure light in many different wavelengths\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6477\/guides\" rel=\"noopener\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56404830847355,"sku":"ADA6477","price":15.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6477-01.png?v=1788528305"},{"product_id":"adafruit-tcs3430-tcs34303-ambient-tri-stimulus-color-sensor","title":"Adafruit TCS3430 \/ TCS34303 Ambient Tri-Stimulus Color Sensor","description":"\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAdafruit TCS3430 \/  TCS34303 (both names are used) Ambient Light Tri-Stimulus Color Sensor\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eis a modern take on the common 'RGB' color sensor: this time with CIE XYZ plus IR diode sensors rather than RGB, so you can match it to your existing color space.\u003c\/p\u003e\n\u003cp\u003eIt acts a bit differently than the color sensors folks are used to, where there are sensors at wavelengths 437nm (X1), 574nm (X2), 537nm (Y) and 434nm (Z) and then the user is expected to calibrate it against a known color space analyzer for their application. For folks that want something that just spits out CIE and Lux data, the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/6335\"\u003eOPT4048 is more complete\u003c\/a\u003e however, there may be some use cases for people who want the raw count data only!\u003c\/p\u003e\n\u003cp\u003eTo make the sensor easy to use, we've taken the TCS34303 and put it onto a breakout PCB along with support circuitry to let you use this little wonder with 3.3V (Feather\/Raspberry Pi) or 5V (Arduino\/ Metro328) logic levels. Additionally since it speaks I2C you can easily connect it up with two wires (plus power and ground!).  We've even included \u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eSparkFun qwiic\u003c\/a\u003e compatible\u003cstrong\u003e \u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/introducing-adafruit-stemma-qt\" target=\"_blank\"\u003eSTEMMA QT\u003c\/a\u003e\u003c\/strong\u003e connectors for the I2C bus so \u003cstrong\u003eyou don't even need to solder!\u003c\/strong\u003e \u003c\/p\u003e\n\u003cp\u003eJust wire up to your favorite micro and you can use our CircuitPython\/Python or\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_TCS3430\"\u003eArduino drivers\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eto easily interface with the TCS34303 and get XYZ+IR color readings in a minute! \u003cstrong\u003eQT Cable is not included\u003c\/strong\u003e,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible\" target=\"_blank\" rel=\"noopener\"\u003ebut we have a variety in the shop\u003c\/a\u003e. \u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003cstrong\u003e\u003c\/strong\u003e\n\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-max44009-lux-light-sensor\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"product-learn-guide-title\"\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-max44009-lux-light-sensor\"\u003e\u003c\/a\u003e\n\u003cdiv\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-max44009-lux-light-sensor\"\u003e\u003c\/a\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv class=\"product-learn-guide-title\"\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv class=\"product-learn-guide-title\"\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-tcs3430-tcs34303-ambient-tri-stimulus-color-sensor\"\u003ePrimary Guide: Adafruit TCS3430 \/ TCS34303 Ambient Tri-Stimulus Color Sensor\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-learn-guide-tagline\"\u003eThe Adafruit TCS3430 \/ TCS34303 (both names are used) Ambient Light Tri-Stimulus Color Sensor is a modern take on the common RGB color sensor: this time with CIE XYZ plus IR diode sensors rather than RGB, so you can match it to your existing color space.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6479\/guides\" rel=\"noopener\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56404841300347,"sku":"ADA6479","price":7.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6479-00.png?v=1788529576"},{"product_id":"adafruit-tmp119-high-precision-i2c-temperature-sensor-stemma-qt","title":"Adafruit TMP119 High-Precision ±0.03°C I2C Temperature Sensor - STEMMA QT \/ Qwiic","description":"\u003cp\u003eThe \u003cstrong\u003eTMP119 High-Precision Temperature Sensor\u003c\/strong\u003e is an I2C temperature sensor that will help you easily add super-precise temperature measurement and adjustment to your project.\u003c\/p\u003e\n\u003cp\u003eIn addition to the obvious support for reading the temperature, the TMP119 can also monitor the temperature and alert you when corrective action needs to be taken.\u003c\/p\u003e\n\u003cp\u003eThe TMP119 has\u003cstrong\u003e 16-bit\u003c\/strong\u003e \/ \u003cstrong\u003e0.0078°C\u003c\/strong\u003e measurement resolution, wide operating range of -55 to 155°C, and up to \u003cstrong\u003e±0.03°C\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(typical) accuracy from 0°C to 45°C. The chip also has high and low \u003cstrong\u003etemperature alerts\u003c\/strong\u003e and interrupt support, and hardware support required for NIST traceability (\u003ca href=\"https:\/\/www.ti.com\/drr\/opn\/NIST-TEMPERATURE\"\u003econtact TI for the NIST documents\u003c\/a\u003e), this temperature sensor is perfect for applications where you need to keep a close eye on temperature. The manufacturer, Texas Instruments, suggests it for use in sensitive applications like thermostats and cold chain asset tracking, or even gas and heat meters!\u003c\/p\u003e\n\u003cp\u003eTMP119 temperature sensor has different accuracy for different ranges, here's what you can expect as the typical \u0026amp; \u003cem\u003emaximum\u003c\/em\u003e variation for popular temperature ranges:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e±0.03°C (typical) from 0°C to 45°C\u003c\/li\u003e\n\u003cli\u003e±0.08°C (maximum) from 0°C to 45°C\u003c\/li\u003e\n\u003cli\u003e±0.09°C (maximum) from –25°C to 85°C\u003c\/li\u003e\n\u003cli\u003e±0.12°C (maximum) from –40°C to 85°C\u003c\/li\u003e\n\u003cli\u003e±0.15°C (maximum) from –55°C to 125°C\u003c\/li\u003e\n\u003cli\u003e±0.2°C (maximum) from –55°C to 150°C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompared to the TMP117, the TMP119 has better accuracy but has the same firmware interface (other than the Chip Identifier being different so you can tell which one you have)\u003c\/p\u003e\n\u003cp\u003eTo make using it as easy as possible, we’ve put the TMP119 on a breakout PCB  in our \u003ca href=\"https:\/\/www.adafruit.com\/?q=Stemma+QT+Sensor\"\u003eStemma QT form factor\u003c\/a\u003e with a sprinkle of support circuitry to give you options when testing. You can either use a breadboard or the\u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003e\u003cstrong\u003e SparkFun qwiic\u003c\/strong\u003e\u003c\/a\u003e compatible \u003ca href=\"https:\/\/learn.adafruit.com\/introducing-adafruit-stemma-qt\"\u003e\u003cstrong\u003eSTEMMA QT\u003c\/strong\u003e\u003c\/a\u003e connectors, and compatibility with 5V voltage levels as commonly found on \u003ca href=\"https:\/\/www.adafruit.com\/category\/17\"\u003eArduinos\u003c\/a\u003e, as well as 3.3V logic used by many other boards like the Raspberry Pi or our Feathers.\u003cstrong\u003e \u003c\/strong\u003e\u003ca href=\"https:\/\/shop.pimoroni.com\/products\/jst-sh-cable-qwiic-stemma-qt-compatible\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eQT Cable is not included\u003c\/strong\u003e, but we have a variety in the shop\u003c\/a\u003e for quick plug-and-play support.\u003c\/p\u003e\n\u003cp\u003eTo get started, all you need to do is look over the \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-tmp117-high-accuracy-i2c-temperature-monitor\/pinouts\"\u003ePinouts\u003c\/a\u003e page to familiarize yourself with the board, and then \u003cstrong\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-tmp117-high-accuracy-i2c-temperature-monitor\"\u003euse the TMP117\/TMP119 Arduino or Python \u0026amp; CircuitPython pages for instructions on how to wire up the TMP119 to your board, as well as libraries and example code to get you started.\u003c\/a\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003e\u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2011 65 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\"\u003e \u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2015 863 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-tmp119-high-precision-temperature-sensor\"\u003ePrimary Guide: Adafruit TMP119 High-Precision Temperature Sensor\u003c\/a\u003e\n16-bit \/ 0.0078°C measurement resolution over I2C\n\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/products\/6482\/guides\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56404853981563,"sku":"ADA6482","price":11.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6482-01.png?v=1788530692"},{"product_id":"adafruit-tmag5273-3d-hall-effect-magnetometer-breakout-stemma-qt","title":"Adafruit TMAG5273 3D Hall Effect Magnetometer Breakout - STEMMA QT","description":"\u003cp\u003eA low-power linear 3D Hall-effect sensor designed for a wide range of industrial and personal electronics applications.\u003c\/p\u003e\n\u003cp\u003eIt integrates three independent Hall-effect magnetometer sensors in the X, Y, and Z axes for full 3D orientation detection. The built-in 12-bit ADC can read the signal from each axis for read-out over I2C, it even has a thermometer built in for basic temperature reading!\u003c\/p\u003e\n\u003cp\u003eAn integrated angle calculation engine (CORDIC) provides full 360° angular position information for both on-axis and off-axis angle measurements. The angle calculation is performed using two user-selected magnetic axes over I2C. The TMAG also features magnetic gain and offset correction - note you'll have to manage the values and write them into the chip on boot-up.\u003c\/p\u003e\n\u003cp\u003e3D Hall effect sensors are great for sensing rotation or motion of an object nearby with a magnet embedded inside: often used for magnetic rotary encoders or joysticks that don't have mechanical switches and thus are more reliable and don't fail from wear.\u003c\/p\u003e\n\u003cp\u003eThis sensor comes in two flavors, the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eA1\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003etype is ±40mT \/ ±80mT range (you can pick either range), and the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eA2\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ehas a wider ±133mT \/ ±266mT range. Both use the exact same firmware and pinout - the firmware we've written can detect which one you have plugged in and automatically scale the readings as necessary. This isn't a great sensor for measuring the magnetic field of the earth, much better for magnets of the ferric or rare-earth persuasion.\u003c\/p\u003e\n\u003cp\u003eTo make life easier so you can focus on your important work, we've taken the TMAG5723 and put it onto a breakout PCB along with support circuitry to let you use this little wonder with 3.3V (Feather\/Raspberry Pi) or 5V (Arduino\/ Metro328) logic levels. Additionally, since it speaks I2C you can easily connect it up with two wires (plus power and ground!).  We've even included \u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eSparkFun qwiic\u003c\/a\u003e compatible\u003cstrong\u003e \u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/introducing-adafruit-stemma-qt\" target=\"_blank\"\u003eSTEMMA QT\u003c\/a\u003e\u003c\/strong\u003e connectors for the I2C bus so \u003cstrong\u003eyou don't even need to solder!\u003c\/strong\u003e Just wire up to your favorite micro and you can use our CircuitPython\/Python or \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_TMAG5273\"\u003eArduino drivers to easily interface with the TMAG\u003c\/a\u003e and get magnetic measurements ASAP.\u003c\/p\u003e\n\u003cp\u003eIt's fully assembled and tested.  Comes with a bit of 0.1\" standard header in case you want to use it with a breadboard or perfboard.  Four 2.5mm (0.1\") mounting holes for easy attachment.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConfigurable power modes including:\u003cbr\u003e2.3mA active mode current\u003cbr\u003e1µA wake-up and sleep mode current\u003cbr\u003e5nA sleep mode current\u003c\/li\u003e\n\u003cli\u003eSelectable linear magnetic range at X, Y, or Z axis:\u003cbr\u003eTMAG5273x1: ±40mT, ±80mT\u003cbr\u003eTMAG5273x2: ±133mT, ±266mT\u003c\/li\u003e\n\u003cli\u003eInterrupt signal from user-defined magnetic and temperature threshold cross\u003c\/li\u003e\n\u003cli\u003e5% (typical) sensitivity drift\u003c\/li\u003e\n\u003cli\u003eIntegrated angle CORDIC calculation with gain and offset adjustment\u003c\/li\u003e\n\u003cli\u003e20kSPS single axis conversion rate\u003c\/li\u003e\n\u003cli\u003eConfigurable averaging up to 32x for noise reduction\u003c\/li\u003e\n\u003cli\u003eConversion trigger by I2C or dedicated INT pin\u003c\/li\u003e\n\u003cli\u003eOptimized I2C interface with cyclic redundancy check (CRC):\u003cbr\u003eMaximum 1-MHz I2C clock speed\u003cbr\u003eSpecial I2C frame reads for improved throughput\u003cbr\u003eFactory-programmed and user-configurable I2C addresses (must be re-written on every reset)\u003c\/li\u003e\n\u003cli\u003eIntegrated temperature compensation for multiple magnet types\u003c\/li\u003e\n\u003cli\u003eBuilt-in temperature sensor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eProduct Dimensions: 25.3mm x 17.7mm x 4.6mm \/ 1.0\" x 0.7\" x 0.2\"\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 1.7g \/ 0.1oz\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2011 65 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\"\u003e \u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2015 863 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-tmag5273-3d-hall-effect-magnetometer-breakout\"\u003ePrimary Guide: Adafruit TMAG5273 3D Hall Effect Magnetometer Breakout\u003c\/a\u003e 3D orientation detection over I2C\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/products\/6489\/guides\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"A1 (±40mT \/ ±80mT)","offer_id":56404941537659,"sku":"ADA6489","price":4.75,"currency_code":"GBP","in_stock":true},{"title":"A2 (±133mT \/ 266mT)","offer_id":56404941570427,"sku":"ADA6490","price":4.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6489-00.png?v=1788531782"},{"product_id":"adafruit-vcnl4030-proximity-and-lux-sensor-stemma-qt-qwiic","title":"Adafruit VCNL4030 Proximity and Lux Sensor - STEMMA QT \/ Qwiic","description":"\u003cp\u003eThe VCNL4030 is a handy two-in-one sensor, with a proximity sensor that works from\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e0 to 300mm\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e(about 12 inches) and light sensor with range of\u003cstrong\u003e\u003cspan\u003e \u003c\/span\u003e0.004 to 16,768 lux\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWe've all been there. That thing is \u003cem\u003eclose\u003c\/em\u003e but \u003cem\u003ehow close?\u003c\/em\u003e When you need to measure a small distance with reasonable accuracy, such as the rough height of particularly calm bumble bee, the VCNL4030 Proximity Sensor from Vishay can do that for you. If perchance you also needed to measure the amount of light at the same time, perhaps to let the bee to know if it's time for bed, you're in luck! The VCNL4030 can do that too (bumble bee not included, we tried putting it in the anti-static bag but it started buzzing in a threatening manner)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote there's quite a few chips in the VCNL4xxx series, with varying ranges and prices.\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eWhile the sensors look and sound similar, the firmware for these chips is not identical, so you cannot swap the VCNL4030 for VCNL4040 or others without recompiling with the respective libraries!\u003c\/p\u003e\n\u003cp\u003eThe VCNL4030 has a nice set of configuration knobs that let you tweak both the proximity sensor (PS) and light sensor (ALS) - for example integration time, dynamic range and sensitivity. Higher integration times mean slower conversion but you can measure dimmer light more precisely. Conversely shorter times mean fast conversion, and can measure brighter lights without oversaturating the sensor. For proximity you can also set up the duty cycle and built-in IR LED current. This lets you balance conversion speed, measurement range, precision and power usage as necessary.\u003c\/p\u003e\n\u003cp\u003eTo make life easier so you can focus on your important work, we've taken the VCNL4030 and put it onto a breakout PCB along with support circuitry to let you use this little wonder with 3.3V (Feather\/Raspberry Pi) or 5V (Arduino\/ Metro328) logic levels. Additionally since it speaks I2C you can easily connect it up with two wires (plus power and ground!).  We've even included \u003ca href=\"https:\/\/www.sparkfun.com\/qwiic\"\u003eSparkFun qwiic\u003c\/a\u003e compatible\u003cstrong\u003e \u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/introducing-adafruit-stemma-qt\" target=\"_blank\"\u003eSTEMMA QT\u003c\/a\u003e\u003c\/strong\u003e connectors for the I2C bus so \u003cstrong\u003eyou don't even need to solder!\u003c\/strong\u003e \u003ca href=\"https:\/\/github.com\/adafruit\/?q=vcnl4030\u0026amp;type=all\u0026amp;language=\u0026amp;sort=\"\u003eJust wire up to your favorite micro and you can use our CircuitPython\/Python or Arduino drivers to easily interface with the VCNL4030\u003cspan\u003e \u003c\/span\u003e\u003c\/a\u003eand make approximate approximations of proximity in no time! \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible\" target=\"_blank\" rel=\"noopener\"\u003e\u003cstrong\u003eQT Cable is not included\u003c\/strong\u003e, but we have a variety in the shop\u003c\/a\u003e. \u003c\/p\u003e\n\u003cdiv class=\"row-fluid build-text\"\u003e\n\u003cdiv class=\"row-fluid build-text\"\u003e\u003c\/div\u003e\n\u003c\/div\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003eProduct Dimensions: 25.5mm x 17.7mm x 4.7mm \/ 1.0\" x 0.7\" x 0.2\"\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 1.7g \/ 0.1oz\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\n\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cmeta charset=\"utf-8\"\u003e \u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-max44009-lux-light-sensor\"\u003e\u003c\/a\u003e\n\u003cdiv class=\"product-learn-guide-title\"\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-max44009-lux-light-sensor\"\u003e\u003c\/a\u003e\n\u003cdiv\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-max44009-lux-light-sensor\"\u003e\u003c\/a\u003e\u003cmeta charset=\"utf-8\"\u003e\n\u003cdiv class=\"product-learn-guide-title\"\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-vcnl4030-proximity-and-lux-sensor\"\u003ePrimary Guide: Adafruit VCNL4030 Proximity and Lux Sensor\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-learn-guide-tagline\"\u003eThe VCNL4030 is a handy two-in-one sensor, with a proximity sensor that works from 0 to 300mm (about 12 inches) and light sensor with range of 0.004 to 16,768 lux.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6491\/guides\" rel=\"noopener\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56404950581627,"sku":"ADA6491","price":4.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6491-00.png?v=1788533574"}],"url":"https:\/\/shop.pimoroni.com\/en-eu\/collections\/new-products.oembed","provider":"Pimoroni Ltd","version":"1.0","type":"link"}