{"title":"micro:bit Kits, Add-ons, and Accessories","description":"\u003cp\u003eA pocket-sized, codeable computer, with sensors, an LED matrix, buttons, and Bluetooth. Using micro:bit is just plain fun; a great way to get kids enthusiastic about code.\u003c\/p\u003e\n\u003cp\u003eJust plug micro:bit into your computer or tablet and start coding, either with the block-based code that's great for learners, or MicroPython for more advanced coders.\u003c\/p\u003e\n\u003cp\u003eWe've got \u003ca href=\"\/en-eu\/products\/micro-bit-complete-starter-kit\"\u003estarter kits\u003c\/a\u003e that have everything you need to get going. Our micro:bit add-ons extend your micro:bit by adding functions like \u003ca href=\"\/en-eu\/products\/enviro-bit\"\u003eweather-sensing\u003c\/a\u003e, \u003ca href=\"https:\/\/shop.pimoroni.com\/products\/scroll-bit\"\u003emore LEDs\u003c\/a\u003e, or \u003ca href=\"https:\/\/shop.pimoroni.com\/products\/noise-bit\"\u003ea speaker\u003c\/a\u003e. And we've got project kits to build everything from \u003ca href=\"\/en-eu\/collections\/micro-bit-uk\/robotics\"\u003erobots\u003c\/a\u003e to \u003ca href=\"\/en-eu\/products\/binarys-ufo\"\u003eUFOs\u003c\/a\u003e.\u003c\/p\u003e","products":[{"product_id":"edge-connector-breakout-board-for-bbc-micro-bit","title":"Edge Connector Breakout Board for micro:bit","description":"\u003cp\u003eThis pre-built Edge Connector Breakout Board for the micro:bit gives access to all the important pins on the bottom edge of the micro:bit.\u003c\/p\u003e\n\u003cp\u003eLooking to do more with your micro:bit? Unlock its potential with this pre-built version of our Edge Connector Breakout Board! This breakout board has been designed to offer an easy way to connect additional circuits and hardware to the pins on the edge of the micro:bit. It provides access to all of the micro:bit processor pins allowing a lot of extra functionality to be added. The datasheet (below) includes a helpful diagram explaining the function of every pin on the micro:bit.\u003c\/p\u003e\n\u003cp\u003eThis Edge Connector Breakout Board for the micro:bit gives access to all of the important pins on the bottom edge of the micro:bit. 21 pins are broken out in total; providing additional I\/O lines, direct access to buttons A and B, the LED matrix outputs and the I2C bus. Please refer to the datasheet below for more details.\u003c\/p\u003e\n\u003cp\u003eThe micro:bit pins are broken out to a row of pin headers. These provide an easy way of connecting circuits using jumper wires. The SCL and SDA pins are separated at the edge of the board (solder pads) providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows the easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required.\u003c\/p\u003e\n\u003cp\u003eTo use the breakout board the micro:bit should be inserted firmly into the connector as shown below:\u003c\/p\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/5601b_edge_connector_breakout_board_connecting_large.jpg?225716761978738442\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: \u003c\/strong\u003eThis product is supplied with straight double row PCB pin headers already soldered to the breakout board\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFeatures a dedicated pin strip for quick and easy prototyping\u003c\/li\u003e\n\u003cli\u003eBreaks out 21 pins from the edge of the micro:bit\u003c\/li\u003e\n\u003cli\u003eDedicated prototyping area with 3V and 0V rows\u003c\/li\u003e\n\u003cli\u003eLabelled pins and clear, straightforward documentation\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Edge Connector Breakout Board for the micro:bit, pre-built\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 60mm\u003c\/li\u003e\n\u003cli\u003eWidth: 40mm\u003c\/li\u003e\n\u003cli\u003eHeight: 11.8mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emicro:bit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/5601b_built_edge_connector_breakout_board_for_the_bbc_microbit_datasheet_v1_1.pdf?12490662077898489497\" target=\"_blank\"\u003eClick here to download the datasheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":19642210119,"sku":"KIT-5601B","price":4.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5601b_large_edge_connector_breakout_board_c103e232-79f5-4492-a4c0-5f67800206ac.jpg?v=1461074493"},{"product_id":"prototyping-system-for-the-bbc-micro-bit","title":"Prototyping system for the micro:bit","description":"\u003cp\u003eThis Prototyping System for the BBC micro:bit is a great way to start making circuits and making experiments without the need to solder.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease Note: BBC micro:bit, 2 x AAA Battery Cage and 2 x AAA Batteries are NOT included. If you also require a BBC micro:bit, you can order one \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003ehere\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis prototyping system uses our specially designed \u003ca title=\"Edge Connector Breakout Board for BBC micro:bit - Pre-built\" href=\"\/en-eu\/products\/edge-connector-breakout-board-for-bbc-micro-bit\" target=\"_blank\"\u003eEdge Connector Breakout Board for micro:bit \u003c\/a\u003ethat gives full access to the pins on the bottom of the micro:bit. The micro:bit pins are broken out to a row of pin headers, the SCL and SDA pins are separated at the edge of the board providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required.\u003c\/p\u003e\n\u003cp\u003eThis prototyping system is used in conjunction with a \u003ca title=\"Small Prototype Breadboard\" href=\"\/en-eu\/products\/solderless-breadboard-400-point\" target=\"_blank\"\u003eSmall Prototype Breadboard\u003c\/a\u003e. This makes it easy to connect additional components using the included \u003ca title=\"Jumper Wires 20cm M\/M\" href=\"\/en-eu\/products\/jumper-jerky\" target=\"_blank\"\u003ejumper wires\u003c\/a\u003e. No soldering required.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/5603_inventors_kit_for_the_bbc_microbit_description_large.jpg?v=1520418767\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis kit requires assembly.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNo soldering is required\u003c\/li\u003e\n\u003cli\u003eBreaks out 21 pins from the micro:bit using the \u003ca href=\"\/en-eu\/products\/edge-connector-breakout-board-for-bbc-micro-bit\" target=\"_blank\"\u003epre-built edge connector breakout board for micro:bit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eSmall prototype breadboard included so you can use additional components\u003c\/li\u003e\n\u003cli\u003eRun your own custom code from your micro:bit to interact with external components\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2 x pan head M3 machine screws\u003c\/li\u003e\n\u003cli\u003e1 x small prototype breadboard\u003c\/li\u003e\n\u003cli\u003e10 x jumper wires male to male\u003c\/li\u003e\n\u003cli\u003e10 x jumper wires male to female\u003c\/li\u003e\n\u003cli\u003e1 x Perspex mounting plate\u003c\/li\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/products\/edge-connector-breakout-board-for-bbc-micro-bit\" target=\"_blank\"\u003eedge connector breakout board for micro:bit - pre-built\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x Phillips screwdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/5609_prototyping_system_for_the_bbc_micro_bit_assembly_instructions.pdf?14237037431791412545\" target=\"_blank\"\u003ePrototyping plate assembly instructions\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/5601b_built_edge_connector_breakout_board_for_the_bbc_microbit_datasheet_v1_1.pdf?14237037431791412545\" target=\"_blank\"\u003eEdge connector breakout board datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":20361939015,"sku":"KIT-5609","price":12.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5609_large_prototyping_system_for_the_bbc_microbit.jpg?v=1539263726"},{"product_id":"inventors-kit-for-the-bbc-micro-bit","title":"Inventor's Kit for the micro:bit","description":"\u003cp\u003eGet more from the micro:bit with Kitronik's incredible inventor's kit! The simple way to learn about creating circuits and code.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note: micro:bit is \u003ci\u003eNOT\u003c\/i\u003e included.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Kitronik Inventor's Kit for the micro:bit is a great way to get started with programming and hardware interaction with the micro:bit. This Inventor's Kit contains everything you need to complete 10 experiments including using LEDs, motors, LDRs, and capacitors.\u003c\/p\u003e\n\u003cp\u003eTo get you off to a flying start, Kitronik have included an easy to follow tutorial book which guides you through everything you will need to know about programming the micro:bit. You don't need any experience with programming as the tutorial book will guide you every step of the way. You'll be programming and creating circuits in no time!\u003c\/p\u003e\n\u003cp\u003eThe Kitronik Inventor's Kit for the micro:bit provides a fantastic way of learning how to construct and control electronic circuits. The micro:bit has a selection of pins that are located on the bottom edge of its PCB (see datasheet below for details). By using the specially designed \u003ca href=\"\/en-eu\/products\/edge-connector-breakout-board-for-bbc-micro-bit\" target=\"_blank\"\u003eedge connector board for the micro:bit\u003c\/a\u003e in conjunction with the breadboard (see below), it is easy to use these pins to connect additional components to the micro:bit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNo soldering is required and you can build your first circuit in minutes!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit requires assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eNo soldering required - build your first circuit in minutes!\u003c\/li\u003e\n\u003cli\u003eMake 10 experiments included in the provided step-by-step tutorial book\u003c\/li\u003e\n\u003cli\u003eAll parts are included to conduct the 10 experiments (listed below)\u003c\/li\u003e\n\u003cli\u003eBreaks out 21 accessible pins from the micro:bit using the \u003ca href=\"\/en-eu\/products\/edge-connector-breakout-board-for-bbc-micro-bit\" target=\"_blank\"\u003eedge connector board for the micro:bit\u003c\/a\u003e (included)\u003c\/li\u003e\n\u003cli\u003eSmall prototype breadboard included for fast prototyping\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAll of the experiments included in this booklet (listed below) are based on the Microsoft BlockEditor and Microsoft TouchDevelop editor software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExperiments included in the tutorial book:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eExperiment One: Say 'Hello' to the micro:bit\u003c\/li\u003e\n\u003cli\u003eExperiment Two: Using an LDR \u0026amp; analog inputs\u003c\/li\u003e\n\u003cli\u003eExperiment Three: Dimming an LED using a potentiometer\u003c\/li\u003e\n\u003cli\u003eExperiment Four: Using a transistor to drive a motor\u003c\/li\u003e\n\u003cli\u003eExperiment Five: Using the accelerometer to control motor speed\u003c\/li\u003e\n\u003cli\u003eExperiment Six: Setting the tone with a piezo buzzer\u003c\/li\u003e\n\u003cli\u003eExperiment Seven: Wind power\u003c\/li\u003e\n\u003cli\u003eExperiment Eight: Making a game using the compass\u003c\/li\u003e\n\u003cli\u003eExperiment Nine: Capacitor charge circuit\u003c\/li\u003e\n\u003cli\u003eExperiment Ten: Using an RGB LED\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Perspex mounting plate\u003c\/li\u003e\n\u003cli\u003e1 x potentiometer \u0026amp; finger adjust spindle\u003c\/li\u003e\n\u003cli\u003e2 x plastic spacer 10mm\u003c\/li\u003e\n\u003cli\u003e1 x sticky fixer for battery pack\u003c\/li\u003e\n\u003cli\u003e1 x small prototype breadboard\u003c\/li\u003e\n\u003cli\u003e1 x terminal connector\u003c\/li\u003e\n\u003cli\u003e4 x push switch\u003c\/li\u003e\n\u003cli\u003e1 x motor\u003c\/li\u003e\n\u003cli\u003e1 x transistor\u003c\/li\u003e\n\u003cli\u003e2 x red 5mm LED\u003c\/li\u003e\n\u003cli\u003e2 x orange 5mm LED\u003c\/li\u003e\n\u003cli\u003e2 x yellow 5mm LED\u003c\/li\u003e\n\u003cli\u003e2 x green 5mm LED\u003c\/li\u003e\n\u003cli\u003e1 x RGB 5mm LED\u003c\/li\u003e\n\u003cli\u003e1 x fan blade\u003c\/li\u003e\n\u003cli\u003e5 x 2.2KΩ resistor\u003c\/li\u003e\n\u003cli\u003e5 x 10KΩ resistor\u003c\/li\u003e\n\u003cli\u003e5 x 47Ω resistor\u003c\/li\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/products\/edge-connector-breakout-board-for-bbc-micro-bit\" target=\"_blank\"\u003eedge connector breakout board for micro:bit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x miniature LDR\u003c\/li\u003e\n\u003cli\u003e10 x male to male jumper wires\u003c\/li\u003e\n\u003cli\u003e10 x male to female jumper wires\u003c\/li\u003e\n\u003cli\u003e1 x 470uF electrolytic capacitor\u003c\/li\u003e\n\u003cli\u003e1 x piezo element buzzer\u003c\/li\u003e\n\u003cli\u003e4 x pan head M3 machine screw\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x micro:bit\u003c\/li\u003e\n\u003cli\u003e1 x Phillips screwdriver\u003c\/li\u003e\n\u003cli\u003e1 x terminal block screwdriver\u003c\/li\u003e\n\u003cli\u003e1 x micro USB cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":20362520327,"sku":"KIT-5603","price":21.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5603_large_inventors_kit_for_the_bbc_microbit_cac536d4-2551-4047-a7d7-672c1904e63d.jpg?v=1571223965"},{"product_id":"usb-a-to-microb-cable-red","title":"USB A to microB cable - Red","description":"\u003cp\u003eHigh quality, power friendly and colourful USB A to Micro-B cables\u003c\/p\u003e\n\u003cp\u003eAvailable in a range of lengths for all possible uses \u003ca href=\"\/en-eu\/products\/usb-a-to-microb-cable-black\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e(also available in a classic black)\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFeatures:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMatte red finish\u003c\/li\u003e\n\u003cli\u003eTPE cable shroud\u003c\/li\u003e\n\u003cli\u003e22 AWG power lines for low voltage drop\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"10cm","offer_id":32065140554,"sku":"CAB0229","price":1.75,"currency_code":"GBP","in_stock":true},{"title":"25cm","offer_id":40351674250,"sku":"CAB0233","price":2.0,"currency_code":"GBP","in_stock":true},{"title":"50cm","offer_id":32065140618,"sku":"CAB0230","price":2.5,"currency_code":"GBP","in_stock":true},{"title":"1m","offer_id":32065140746,"sku":"CAB0231","price":2.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/A_to_microB_red.JPG?v=1476191043"},{"product_id":"exhi-bit-prototyping-system-for-micro-bit","title":"exhi:bit prototyping system for micro:bit","description":"\u003cp\u003eAlthough the micro:bit is a wonderful platform, the classroom management and the workshop management of all the supporting accessories is a challenge. Enter the exhi:bit – a prototyping and development system for the BBC micro:bit.\u003c\/p\u003e\n\u003cp\u003eProto-PIC wanted to create a system where a student could go from a prototype board to a finished, more permanent project seamlessly. But importantly, they wanted to create a system where the main workhorse parts could be reused time and time again.\u003c\/p\u003e\n\u003cp\u003eExhi:bit has an edge connector socket which the micro:bit plugs into. As soon as the micro:bit is plugged in, you are ready to start creating.\u003c\/p\u003e\n\u003cp\u003eExhi:bit has all the micro:bit pins broken out to header connectors, for connection to plugin exhi:bit daughter boards and plugin classroom project boards, but also to generous pads on the edge of the board – so you can connect to your project with conductive thread, banana jacks or crocodile clips.\u003c\/p\u003e\n\u003cp\u003eA generous prototyping area is provided for users who wish to create permanent projects, directly onto the exhi:bit or you can use a DIY Daughter board to easily swap projects\u003c\/p\u003e\n\u003cp\u003eOr..\u003c\/p\u003e\n\u003cp\u003esimply add a \u003ca href=\"\/en-eu\/products\/solderless-breadboard-400-point\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehalf size breadboard\u003c\/a\u003e \u003cstrong\u003e(not included)\u003c\/strong\u003e to prototype your circuit.\u003c\/p\u003e\n\u003cp\u003eAll of the circuits you create on your exhi:bit can be powered by using a 5-9V DC power supply \u003cstrong\u003e(not included)\u003c\/strong\u003e or the micro USB port. The micro USB port isn’t intended for programming the micro:bit – they just provided it as a convenient way to power the board. The on-board regulator ensures the voltage is micro:bit friendly. Proto-PIC have now added a raw pin so you can tap the RAW voltage for your devices.\u003c\/p\u003e\n\u003cp\u003eHow many times have you opened your drawer to find a board and had no idea what it was for? Three areas on the exhi:bit are provided for taking notes using a sharpie marker or similar, so you can keep track of which project is on which board – or which student has created the project.\u003c\/p\u003e\n\u003cp\u003eA range of classroom project plug in modules for the exhi:bit will be released soon.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis is the second revision of the exhi:bit, Proto-PIC have removed entirely the acrylic plates and stand offs and instead included 4 rubber feet. They now no longer include the breadboard as many people had requested this in order to lower the cost as they already owned a breadboard. They’ve also added a raw pad to the board so you can power a device directly from the input before it goes through the regulator circuit.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Proto-PIC","offers":[{"title":"Default Title","offer_id":35007644618,"sku":"PPMB00101","price":15.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/exhibit001.jpg?v=1606462738"},{"product_id":"bit-2-pi","title":"Bit:2:Pi","description":"\u003cp\u003eBit:2:Pi allows the micro:bit to connect to Raspberry Pi add-on boards.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: micro:bit is NOT included!\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Bit:2:Pi enables you to reuse all those hundreds of\u003ca href=\"\/en-eu\/collections\/hats\" target=\"_blank\"\u003e Raspberry Pi add-on boards and HATs.\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eSimply plug your \u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emicro:bit\u003c\/a\u003e into the edge connector and the required Raspberry Pi HAT onto the GPIO connector, then program your micro:bit to control the new board. Most Raspberry Pi boards are very simple to program as they are controlled by simple on\/off signals on the GPIO connector which are easily copied in the micro:bit. 4tronix have also used NeoPixel boards (eg. \u003ca href=\"\/en-eu\/products\/unicorn-phat\" target=\"_blank\"\u003eUnicorn pHAT\u003c\/a\u003e) with great success and are happily communicating via I2C as well.\u003c\/p\u003e\n\u003cp\u003eSelect which micro:bit pin is connected to which GPIO pin via a set of configurable jumpers. There is a default set of connections that works for the most common boards, including I2C and SPI connections, but it is a simple matter to unplug a jumper or two, and replace it with a longer wire jumper (4 included) to connect your preferred pins.\u003c\/p\u003e\n\u003cp\u003eOf course, the original code for the Raspberry Pi won't run directly on the micro:bit but with support from our community we will get more and more boards working and with example micro:bit code.\u003c\/p\u003e\n\u003cp\u003eCurrent boards tested include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4tronix: PlayHat, \u003ca href=\"\/en-eu\/products\/picon-zero-intelligent-robotics-controller-for-raspberry-pi\" target=\"_blank\"\u003ePicon Zero\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/pistop-traffic-light-add-on-for-raspberry-pi\" target=\"_blank\"\u003ePiStop\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/pistep2-quad-stepper-motor-control-board-for-raspberry-pi\" target=\"_blank\"\u003emotor controllers\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003ePimoroni: Unicorn \u003ca href=\"\/en-eu\/products\/unicorn-phat\" target=\"_blank\"\u003epHAT\u003c\/a\u003e\/\u003ca href=\"\/en-eu\/products\/unicorn-hat\" target=\"_blank\"\u003eHAT\u003c\/a\u003e. \u003ca href=\"\/en-eu\/products\/explorer-phat\" target=\"_blank\"\u003eExplorer\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/enviro-phat\" target=\"_blank\"\u003eEnviro pHAT\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/blinkt\" target=\"_blank\"\u003eBlinkt!\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/scroll-phat\" target=\"_blank\"\u003eScroll pHAT\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePower is supplied to the board and the micro:bit via the micro-USB connector on the side, but there is also an option to add a battery holder to allow completely wire-free operation.\u003c\/p\u003e\n\u003cp\u003eMore details on \u003ca href=\"http:\/\/4tronix.co.uk\/bit2pi\/\" target=\"_blank\"\u003ethe 4tronix blog\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatible with \u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emicro:bit \u003c\/a\u003ev1 and v2.\u003c\/strong\u003e\u003c\/p\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":38188126666,"sku":"4TR-BIT2PIA","price":13.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/Bit-2-Pi_1_of_3.JPG?v=1539263768"},{"product_id":"simon-says-for-micro-bit","title":"Simon:Says for micro:bit","description":"\u003cp\u003eThis is a Simon:Says board for the micro:bit. With this board you can create your own Simon Says game by programming the micro:bit.\u003c\/p\u003e\n\u003cp\u003eWe provide a simple example should you require it or why not jump in and make one from scratch? What about a two player version using the micro:bit radio function?\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e4 x WS2812B addressable RGB LEDs (also known as NeoPixels)\u003c\/li\u003e\n\u003cli\u003e1 x buzzer\u003c\/li\u003e\n\u003cli\u003e4 x rubber feet\u003c\/li\u003e\n\u003cli\u003e4 x capacitive touch pads\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003e\u003cstrong\u003ePlease note: the micro:bit is not included!\u003c\/strong\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eExample code:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/proto-pic\/micro-bit\/blob\/master\/Simon_PCB.py\" target=\"_blank\"\u003eMicroPython example\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.proto-pic.co.uk\/micro-bit-resources.html\" target=\"_blank\"\u003eCAD resources for this and other micro:bit parts\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eCAD resources:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.proto-pic.co.uk\/user\/products\/large\/simon%20says%20v1.step\" target=\"_blank\"\u003eSimon:Says board step file\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Proto-PIC","offers":[{"title":"Default Title","offer_id":40108264074,"sku":"PPMB00111","price":12.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/simonsays.png?v=1539263846"},{"product_id":"servo-lite-board-for-micro-bit","title":"Servo:Lite board for micro:bit","description":"\u003cp\u003eThis Servo:Lite board for the micro:bit can form the control hub for your robotics project, control up to three servos \u0026amp; has 5 x RGB ZIP LEDs on board.\u003c\/p\u003e\n\u003cp\u003eThe Servo:Lite board for the micro:bit is a simple board that allows you to easily connect and control low power servo motors (servo's must be capable of operating at 3.3V) using the micro:bit. It is connected to the micro:bit using five bolts. Connect two servos in standard configuration and it can drive up to 3 servos if the addressable ‘ZIP’ LEDs aren’t needed.\u003c\/p\u003e\n\u003cp\u003eIt is powered by 3 AAA batteries and also supplies power to the micro:bit, the board features an on\/off switch so when it's not in use the batteries won't drain.\u003c\/p\u003e\n\u003cp\u003eThe board also features 5 x RGB individually addressable ZIP LEDs (NeoPixel-compatible) and additional external ZIP LEDs can be connected to the board as required.\u003c\/p\u003e\n\u003cp\u003eKitronik have produced a range of tutorials and guides that can be found in the resources section below. They have guides detailing; how to control a third servo and how to write code for the on-board ZIP LEDs.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConnect two servos in standard configuration and can drive up to 3 servos if the addressable ‘ZIP’ LEDs aren’t needed\u003c\/li\u003e\n\u003cli\u003ePowered by 3 AAA batteries that also supply power to the \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e (not supplied)\u003c\/li\u003e\n\u003cli\u003eOn\/off switch\u003c\/li\u003e\n\u003cli\u003e5 x RGB addressable ZIP LEDs (NeoPixel-compatible). Additional external ZIP LEDs can be connected to the board.\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Servo:Lite board with battery holder pre-fitted\u003c\/li\u003e\n\u003cli\u003e5 x M3x8 counter-sunk Pozi Steel screws\u003c\/li\u003e\n\u003cli\u003e1 x Perspex spacer\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 55mm\u003c\/li\u003e\n\u003cli\u003eHeight: 52mm\u003c\/li\u003e\n\u003cli\u003eHeight: 17mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3 x AAA batteries\u003c\/li\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eServos\u003c\/li\u003e\n\u003cli\u003eScrewdriver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/kitronik-custom-pxt-editor-servo-blocks\/\" target=\"_blank\"\u003eGuide for Kitronik custom PXT editor servo blocks\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\" target=\"_blank\"\u003eGuide for controlling 3 servos with the Servo:Lite board\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/using-kitronik-zip-leds-bbc-microbit\/\" target=\"_blank\"\u003eGuide for using Kitronik ZIP LEDs with the micro:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"WS2812B Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/WS2812B-LED-datasheet.pdf\" target=\"_blank\"\u003eWS2812B datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca title=\"servo:lite Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5623-servo-lite-datasheet.pdf\" target=\"_blank\"\u003eServo:Lite board datasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":43345153226,"sku":"KIT-5623","price":9.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5623_additional_servo_lite_board_move_mini_bbc_microbit_top.jpg?v=1539263930"},{"product_id":"amp-bit-class-d-amplifier-for-micro-bit-with-headphone-jack","title":"Amp:bit class D amplifier for micro:bit with headphone jack","description":"\u003cp\u003eThe Amp:bit is the easiest way to connect a speaker or headphones to your micro:bit.\u003c\/p\u003e\n\u003cp\u003eThe Amp:bit plugs on to the edge of your micro:bit and gives you the option of plugging headphones or speakers into the provided headphone jack, or you can solder speaker wires directly to the provided pads.\u003c\/p\u003e\n\u003cp\u003eIf you have a speaker connected to the speaker pads, the speakers will automatically mute when something is plugged in to the headphone socket. You also get a volume control wheel so you can adjust the volume whenever you like.\u003c\/p\u003e\n\u003cp\u003eThe Amp:bit also works great with the \u003ca href=\"\/en-eu\/products\/1up-bit-controller-kit-for-bbc-micro-bit\" target=\"_blank\"\u003e1up:bit game controller!\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eExample code:\u003c\/b\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.proto-pic.co.uk\/user\/AudioSample.zip\" target=\"_blank\"\u003eMicroPython example code - using an encoded WAV sample\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.proto-pic.co.uk\/user\/1upbitdemo.zip\" target=\"_blank\"\u003eCode for use with 1up:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eHeadphones, screw terminal, and speaker not included.\u003c\/strong\u003e\u003c\/p\u003e","brand":"Proto-PIC","offers":[{"title":"Default Title","offer_id":46122905866,"sku":"PPMB00130","price":12.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/ampbit001.jpg?v=1539264070"},{"product_id":"moisture-sensor-for-micro-bit","title":"Moisture Sensor for micro:bit","description":"\u003cp\u003eThe moisture sensor for micro:bit allows your micro:bit to detect moisture, so if your plant is thirsty you'll know about it! or how about using one and a couple of micro:bits to tell you when your bath has reached the correct level?\u003c\/p\u003e\n\u003cp\u003eTo hook this up to your micro bit you will require alligator cables alternatively you can solder headers or a screw terminal to the board to make hooking it up to your other micro controller projects a dream.\u003c\/p\u003e\n\u003cp\u003eSample code:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.proto-pic.co.uk\/user\/products\/large\/plant%20watering.zip\" target=\"_blank\"\u003ePlant watering code\u003c\/a\u003e (micropython)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Proto-PIC","offers":[{"title":"Default Title","offer_id":930704228362,"sku":"PPMB00113","price":7.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/moisture001.jpg?v=1539263427"},{"product_id":"speaker-for-micro-bit","title":"Speaker for micro:bit","description":"\u003cp\u003eThe MonkMakes Speaker for micro:bit is a neat little amplified speaker that connects to your micro:bit using alligator clips.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAmplified output\u003c\/li\u003e\n\u003cli\u003eLED ‘power on’ indicator\u003c\/li\u003e\n\u003cli\u003eReverse polarity protection\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eConnecting to your micro:bit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect the Speaker to the micro:bit as shown below. When attaching the alligator clips to the micro:bit, make sure that the clips are perpendicular to the board so that they are not touching any of the neighbouring connectors on the micro:Bit edge connector.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/wiring_speaker_large.png?v=1512398482\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJavaScript Blocks Editor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eVisit the \u003ca href=\"https:\/\/makecode.microbit.org\/\" target=\"_blank\"\u003eBlocks Editor\u003c\/a\u003e in your browser and then from the \u003cem\u003einput\u003c\/em\u003e section add an \u003cem\u003eon button A pressed\u003c\/em\u003e block then from the \u003cem\u003emusic\u003c\/em\u003e section add a \u003cem\u003estart melody\u003c\/em\u003e block and select the tune you want to play (in this case, \u003cem\u003eentertainer\u003c\/em\u003e).\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/play_tune_block_ed_closeup-1024x186_large.png?v=1512398631\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eClick Download and then copy the file onto your micro:bit.\u003c\/p\u003e\n\u003cp\u003eYou can also open the project in the Blocks Editor by clicking on the image below.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/_FWETHRRfu6vA\" target=\"_blank\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/play_tune_block_ed-1024x437_large.png?v=1512398671\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eYou can also make a simple musical instrument, using this tutorial: \u003ca href=\"https:\/\/makecode.microbit.org\/projects\/hack-your-headphones\/code\" target=\"_blank\"\u003ehttps:\/\/makecode.microbit.org\/projects\/hack-your-headphones\/code\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicroPython\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePaste the following code into the \u003ca href=\"http:\/\/python.microbit.org\/editor.html\" target=\"_blank\"\u003ePython window\u003c\/a\u003e and then Download the file and copy it onto your your micro:bit\u003c\/p\u003e\n\u003cp\u003e\u003ccode\u003efrom microbit import *\u003cbr\u003eimport music\u003cbr\u003e\u003cbr\u003ewhile True:\u003cbr\u003e    if button_a.was_pressed():\u003cbr\u003e        music.play(music.ENTERTAINER)\u003c\/code\u003e\u003c\/p\u003e\n\u003cp\u003eWhen you press button A you will hear the tune “The Entertainer” play through the speaker.\u003c\/p\u003e\n\u003ch2\u003eMore Resources\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.monkmakes.com\/downloads\/datasheet_speaker_for_mb.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eDatasheet\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.monkmakes.com\/downloads\/instructions_speaker_for_mb_1g.pdf\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eInstructions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Monk Makes","offers":[{"title":"Default Title","offer_id":1447791525898,"sku":"MNK00060","price":7.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/Monk_3_of_3.JPG?v=1539263532"},{"product_id":"relay-for-micro-bit","title":"Relay for micro:bit","description":"\u003cp\u003eThe MonkMakes Relay for micro:bit is a solid-state (no moving parts) relay that allows an output of a micro:bit to turn things on and off.\u003c\/p\u003e\n\u003cp\u003eA micro:bit can turn an LED on and off directly, but anything more powerful requires something like a relay or a transistor. Using a transistor to switch something on and off requires a shared ground connection with the micro:bit and a knowledge electronics that you or your students may not be ready for. The MonkMakes Relay for micro:bit is much easier to use, acting like a simple micro:bit controlled switch.\u003c\/p\u003e\n\u003cp\u003eThis relay can be used to switch low voltage devices such as light bulbs, a motor, a small heating element or even a string of 12V LED lighting. The voltage needs to be kept under 16V, but the relay will automatically protect itself against too much current.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/connected-copy-1024x656_large.jpg?v=1512399592\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eFEATURES\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSolid-sate relay (up to 2 Amps)\u003c\/li\u003e\n\u003cli\u003eActive LED indicator\u003c\/li\u003e\n\u003cli\u003eResettable ‘polyfuse’ to protect against over-current\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cp\u003eConnecting your micro:bit\u003c\/p\u003e\n\u003cp\u003eThe Relay requires just two connections to the micro:bit. One to GND (ground) and one to whatever pin is to be used to control the relay’s switching action.\u003c\/p\u003e\n\u003cp\u003eWhen attaching the alligator clips to the micro:bit, make sure that the clips are perpendicular to the board so that they are not touching any of the neighbouring connectors on the micro:Bit edge connector.\u003c\/p\u003e\n\u003cp\u003eHere’s an example of how you could wire up a MonkMakes Relay for micro:bit to turn an old fashioned light bulb on and off.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/wiring_relay-929x1024_large.png?v=1512399623\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHEX File\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe quickest way to try out your relay is to \u003ca href=\"https:\/\/monkmakes.com\/blink_relay.hex\" target=\"_blank\"\u003eDOWNLOAD THIS HEX FILE \u0026gt;\u003c\/a\u003eand then copy it onto your micro:bit. The program will turn the relay on and off once a second.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJavaScript Blocks Editor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eSet the controlling pin to 1 and the relay contacts will close, set it to 0 and the contacts will open again. Its as simple as that. So, to make your relay turn on and off once a second, \u003ca href=\"http:\/\/python.microbit.org\/editor.html\" target=\"_blank\"\u003eopen the Blocks Editor\u003c\/a\u003e, add a \u003cem\u003eforever\u003c\/em\u003e block and then the \u003cem\u003edigital write\u003c\/em\u003e blocks from the \u003cem\u003epins\u003c\/em\u003e category and the \u003cem\u003epauses\u003c\/em\u003e from the \u003cem\u003ebasic \u003c\/em\u003ecategory.\u003c\/p\u003e\n\u003cp\u003eYou can also click on the image of the blocks below to open up the Blocks Editor on this project.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/_R9Aa5gejw1p2\" target=\"_blank\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/blocks_large.png?v=1512399662\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicroPython\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePaste the following code into the \u003ca href=\"http:\/\/python.microbit.org\/editor.html\" target=\"_blank\"\u003ePython window\u003c\/a\u003e and then Download the file and copy it onto your your micro:bit.\u003c\/p\u003e\n\u003cp\u003e\u003ccode\u003efrom microbit import *\u003cbr\u003e\u003cbr\u003ewhile True:\u003cbr\u003e    pin0.write_digital(True)\u003cbr\u003e    sleep(500)\u003cbr\u003e    pin0.write_digital(False)\u003cbr\u003e    sleep(500)\u003c\/code\u003e\u003c\/p\u003e\n\u003ch2\u003eAnalog Outputs\u003c\/h2\u003e\n\u003cp\u003eThe latest MonkMakes Relay for micro:bit can do more than just switch things on and off. It can also be used with micro:bit analog outputs. Look closely at your Relay for micro:bit and is it has the version number \u003cstrong\u003ev1ev\u003c\/strong\u003e (under the word ‘Board’) then it can be used with the ‘analog write’ block in the blocks editor or the ‘write_analog’ function in MicroPython. If your board has the version number \u003cstrong\u003ev1e\u003c\/strong\u003e then it is not suitable for use with analog outputs – sorry you were unlucky to get one of the small batch of first boards to be sold.\u003c\/p\u003e\n\u003cp\u003eThe output of the Relay for micro:bit is not linear at low PWM and high PWM values as the following chart illustrates.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/graph_large.png?v=1512399750\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe y-axis shows the current in mA for a test load resistor supplied from a constant voltage source. The x-axis is the analog write value (0 to 1023). As you can see, there is a dead zone up to a analog output value of about 100, followed by a relatively good linear region right up to about 1000, after which the output effectively becomes ‘on’.\u003c\/p\u003e\n\u003cp\u003eThe tests were carried out at the default PWM frequency of 50Hz for the micro:bit. Lower frequency PWM is expected to produce more linear results.\u003c\/p\u003e","brand":"Monk Makes","offers":[{"title":"Default Title","offer_id":1447864369162,"sku":"MNK00061","price":7.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/Monk_1_of_3.JPG?v=1539263534"},{"product_id":"sensor-for-micro-bit","title":"Sensor for micro:bit","description":"\u003cp\u003eThe MonkMakes Sensor Board for micro:bit allows you to sense sound level, temperature and light level.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e3V and GND connections can be made from either side and allow you to power a second board such as the \u003ca href=\"\/en-eu\/products\/relay-for-micro-bit\" target=\"_blank\"\u003eMonkMakes Relay Board\u003c\/a\u003e or \u003ca href=\"\/en-eu\/products\/speaker-for-micro-bit\" target=\"_blank\"\u003eMonkMakes Speaker\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eLED ‘power on’ indicator\u003c\/li\u003e\n\u003cli\u003eReverse polarity protection\u003c\/li\u003e\n\u003cli\u003eAll three sensors are analog and can be connected to pins P0, P1 and P2 using alligator clips.\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cp\u003eConnecting to your micro:bit\u003c\/p\u003e\n\u003cp\u003eYou only have to wire up the sensors that you are actually using, but you could wire all the sensors up as shown below. The code examples below assume that pin 0 is used for sound, pin 1 for temperature and pin 2 for light. You can use any pin for any of the sensors, but remember to modify the code to match the pin you are using.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/sound_sensing-591x1024_large.png?v=1512400300\" alt=\"\"\u003e\u003c\/p\u003e\n\u003ch2\u003eSound\u003c\/h2\u003e\n\u003cp\u003eThe Sensor for micro:bit uses a MEMs (microphone on a chip) and a pre-amplifier. The output of the sound sensor is connected to an analog input where it can be sampled. The sound signal varies about the 1.5V level. So, silence will produce an analog output of around 1.5V. When there is sound the analog readings will oscillate above and below the 1.5V level like this:\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/scope_speach-annotated-1024x355_large.png?v=1512400335\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThis is why 511 is subtracted from the readings in the code examples below.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJavaScript Blocks Editor\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHere is an example of using the Sensor Board to display a bargraph to indicate the sound level. Click on the image below to try it out. Making a noise into the microphone will make the LEDs dance.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/_KurHzxeKERrm\" target=\"_blank\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/sound_block-1024x184_large.png?v=1512400386\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicroPython\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ccode\u003efrom microbit import *\u003cbr\u003e\u003cbr\u003edef bargraph(a):\u003cbr\u003e display.clear()\u003cbr\u003e for y in range(0, 5):\u003cbr\u003e if a \u0026gt; y:\u003cbr\u003e for x in range(0, 5):\u003cbr\u003e display.set_pixel(x, 4-y, 9)\u003cbr\u003e \u003cbr\u003ewhile True:\u003cbr\u003e sound_level = (pin0.read_analog() - 511) \/ 100\u003cbr\u003e bargraph(sound_level)\u003c\/code\u003e\u003c\/p\u003e\n\u003ch2\u003eTemperature\u003c\/h2\u003e\n\u003cp\u003eThe Sensor for micro:bit uses a thermistor to measure temperature. The temperature output from the board is a voltage that indicates the temperature. This is then measured using an analog input on the micro:bit.\u003c\/p\u003e\n\u003cp\u003eThe calculations for converting this voltage reading to an actual temperature are quite complicated and so the code examples here will only give a rough idea of temperature.\u003c\/p\u003e\n\u003cp\u003eIf you want your temperatures in Fahrenheit, then multiply the temperature in degrees C by 9, divide the result by 5 and then add 32.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJAVASCRIPT BLOCKS EDITOR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis is an example of using the Sensor Board to display the temperature, try putting your finger on the temperature sensor to warm it up. You can run the example below by clicking on it.\u003c\/p\u003e\n\u003cp\u003e \u003ca href=\"https:\/\/makecode.microbit.org\/_iKEWeJVvePTx\" target=\"_blank\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/thermometer_blocks-1024x310_large.png?v=1512400524\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicroPython\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ccode\u003efrom microbit import *\u003cbr\u003e \u003cbr\u003ewhile True:\u003cbr\u003e reading = pin1.read_analog()\u003cbr\u003e temp_c = int(reading \/ 13.33 - 14)\u003cbr\u003e display.scroll(str(temp_c))\u003cbr\u003e sleep(500)\u003c\/code\u003e\u003c\/p\u003e\n\u003ch2\u003eLight\u003c\/h2\u003e\n\u003cp\u003eThe light sensor uses a phototransistor to measure the light level and produces an output voltage that increases as the light level increases. Here is a guide to the kind of light level you might get from the sensor under different conditions (0 to 1023).\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDark 0 to 3\u003c\/li\u003e\n\u003cli\u003eDimly lit room 6 to 10\u003c\/li\u003e\n\u003cli\u003eIndoors directly under a light 10 to 50\u003c\/li\u003e\n\u003cli\u003eOutdoors (dull day) 100 to 200\u003c\/li\u003e\n\u003cli\u003eOutdoors (sunny day) 800 to 900\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eEven though the maximum analog read value is 1023, the maximum reading from this sensor is around 900.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eJAVASCRIPT BLOCKS EDITOR\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eHere is an example of using the Sensor Board to display a bargraph to indicate the light level. Click on the image below to try it out. Put your finger over the light sensor to make it dark or shine a flash-light onto it to make more LEDs light up.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/microbit-screenshot-sensor-1024x212_large.png?v=1512400668\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMicroPython\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ccode\u003efrom microbit import *\u003cbr\u003e\u003cbr\u003edef bargraph(a):\u003cbr\u003e display.clear()\u003cbr\u003e for y in range(0, 5):\u003cbr\u003e if a \u0026gt; y:\u003cbr\u003e for x in range(0, 5):\u003cbr\u003e display.set_pixel(x, 4-y, 9)\u003cbr\u003e \u003cbr\u003ewhile True:\u003cbr\u003e light_level = pin2.read_analog() \/ 10\u003cbr\u003e bargraph(light_level)\u003c\/code\u003e\u003c\/p\u003e","brand":"Monk Makes","offers":[{"title":"Default Title","offer_id":1447927382026,"sku":"MNK00062","price":8.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/Monk_2_of_3.JPG?v=1539263535"},{"product_id":"line-follower-sensor-pack-for-robo-bit-buggy","title":"Line Follower Sensor Pack for Robo:Bit Buggy","description":"\u003cp\u003eThis pack adds twin line following sensors to your \u003ca href=\"\/en-eu\/products\/robo-bit-mk2-buggy-for-the-micro-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eRobo:Bit buggy\u003c\/a\u003e. Simply screw together and plug in the included cables.\u003c\/p\u003e\n\u003cp\u003eThis pack includes:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x 30mm pillars\u003c\/li\u003e\n\u003cli\u003e4 x 6mm screws\u003c\/li\u003e\n\u003cli\u003e2 x Line Follower sensors\u003c\/li\u003e\n\u003cli\u003e2 x 10cm GVS cables\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":2530541993994,"sku":"4TR-RBITL","price":5.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/IMG_1371a_1024x1024_f3b2e7c2-732a-4ef5-a943-05c7f76547e8.jpg?v=1520443005"},{"product_id":"micro-bit-accessories-kit","title":"micro:bit accessories kit","description":"\u003cp\u003eHandy accessories to get you started with micro:bit!\u003c\/p\u003e\n\u003cp\u003eThis dandy little kit has a battery pack for portable projects, and a micro-USB cable to connect your micro:bit to your computer to start your coding adventures.\u003c\/p\u003e\n\u003cp\u003eThe battery pack contains two AAA batteries and has a switch to turn the power on and off. It connects to your micro:bit with the attached JST adaptor.\u003c\/p\u003e\n\u003cp\u003eThe micro-USB cable connects your micro:bit and your computer, and provides power and data (for coding) connections. Easy!\u003c\/p\u003e\n\u003cp\u003eCompatible with micro:bit v1 and v2.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePlease note: colour of micro-USB cable may vary!\u003c\/em\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":2768285794314,"sku":"PIM349","price":3.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/Kit_v2_db83ade4-3ef5-47be-ab27-e5e754e5b03f.JPG?v=1521713806"},{"product_id":"scroll-bit","title":"scroll:bit","description":"\u003cp\u003escroll:bit is a little display with a lot of pixels! Its 119 bright white LEDs are perfect for scrolling messages with your \u003ca href=\"https:\/\/shop.pimoroni.com\/products\/microbit\"\u003emicro:bit\u003c\/a\u003e, or for animations, graphs, and more!\u003c\/p\u003e\n\u003cp\u003eJust slot in your micro:bit, then code scroll:bit with the block-based \u003ca href=\"https:\/\/makecode.microbit.org\" target=\"_blank\"\u003eMicrosoft MakeCode editor\u003c\/a\u003e, or with MicroPython in the \u003ca href=\"https:\/\/codewith.mu\" target=\"_blank\"\u003eMu code editor\u003c\/a\u003e. It works in a very similar way to the built-in red LED matrix on your micro:bit, so if you've used that then you'll know exactly what to do.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComes fully-assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e17x7 matrix of bright white pixels (119 total)\u003c\/li\u003e\n\u003cli\u003eIndividual PWM brightness control of each pixel\u003c\/li\u003e\n\u003cli\u003eUses the IS31FL3731 LED matrix driver chip\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"https:\/\/shop.pimoroni.com\/products\/microbit\"\u003emicro:bit\u003c\/a\u003e and \u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emicro:bit v2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMicrosoft MakeCode and MicroPython support\u003c\/li\u003e\n\u003cli\u003eNo soldering required!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware \u003c\/h2\u003e\n\u003cp\u003eYou can code scroll:bit with the block-based \u003ca href=\"https:\/\/makecode.microbit.org\" target=\"_blank\"\u003eMicrosoft MakeCode editor\u003c\/a\u003e, that'll get you started with the concepts of how to code a matrix of LEDs or, if you want to delve deeper, then you can use MicroPython in the \u003ca href=\"https:\/\/codewith.mu\" target=\"_blank\"\u003eMu code editor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo add the scroll:bit library in MakeCode, click on the cog at the top right hand corner, then \"Add Package\", then search for \"scrollbit\". You can find full instructions at the \u003ca href=\"https:\/\/github.com\/pimoroni\/pxt-scrollbit\"\u003eGitHub repository for the library\u003c\/a\u003e.\u003cbr\u003e\u003cbr\u003eOur \u003ca href=\"https:\/\/learn.pimoroni.com\/tutorial\/sandyj\/getting-started-with-scroll-bit-and-makecode\"\u003eGetting Started with scroll:bit tutorial\u003c\/a\u003e has a bunch of useful information and even embedded code examples (including how to make a spirit level) that are easy to download straight to your micro:bit. You'll be up-and-running in a jiffy!\u003c\/p\u003e\n\u003cp\u003eOur \u003ca href=\"https:\/\/github.com\/pimoroni\/micropython-scrollbit\"\u003eMicroPython library for scroll:bit is also available at GitHub\u003c\/a\u003e, again with full instructions on how to get going with it.\u003c\/p\u003e\n\u003ch2\u003eWorksheets\u003c\/h2\u003e\n\u003cp\u003eOur Tanya has put together some lovely educational content for scroll:bit, including downloadable worksheets for use in the classroom or for learning at home.  They'll show you how to get started and how to build some simple projects with MakeCode blocks.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/edu.pimoroni.com\/scroll-bit-activity-1\/\" target=\"_blank\"\u003eDisplaying words on the scroll:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/edu.pimoroni.com\/scroll-bit-activity-2\/\"\u003eDisplaying an icon anywhere on the scroll:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/edu.pimoroni.com\/scroll-bit-activity-3-making-a-scrolling-information-station\/\" target=\"_blank\"\u003eMake a tilting ghost\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/edu.pimoroni.com\/animations-on-the-scroll-bit\/\" target=\"_blank\"\u003eAnimations on the scroll:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":3090493767690,"sku":"PIM353","price":13.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/microbit-addons-sq-1.jpg?v=1530271002"},{"product_id":"rgb-led-for-micro-bit","title":"RGB LED for micro:bit","description":"\u003cp\u003eThe MonkMakes RGB LED for micro:bit provides a colourful add-on to your micro:bit. Connect it up with alligator clips and then use the three outputs of your micro:bit to control the red, green and blue channels to mix up any colour of light you want.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to connect\u003c\/li\u003e\n\u003cli\u003ePowered directly from micro:bit pins\u003c\/li\u003e\n\u003cli\u003eUseful for teaching color mixing.\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eConnecting to your micro:bit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eConnect the RGB LED to the micro:bit as shown below. When attaching the alligator clips to the micro:bit, make sure that the clips are perpendicular to the board so that they are not touching any of the neighbouring connectors on the micro:bit edge connector.\u003c\/p\u003e\n\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/wiring-467x1024_large.png?v=1525793442\" style=\"float: none;\"\u003e\n\u003ch2\u003eJavaScript Blocks Editor\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTraffic Signal Example\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eClick on the example below to open the code in the JavaScript Blocks Editor. Once its running on your micro:bit it will cycle through the colors of a traffic signal.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/_CP1fvqCCR6CK\" target=\"_blank\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/traffic_code-1024x801_large.png?v=1525793497\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eMicroPython\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTRAFFIC SIGNAL EXAMPLE\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003ePaste the following code into the \u003ca href=\"http:\/\/python.microbit.org\/editor.html\" target=\"_blank\"\u003ePython window\u003c\/a\u003e and then Download the file and copy it onto your your micro:bit\u003c\/p\u003e\n\u003cp\u003e\u003ccode\u003efrom microbit import *\u003cbr\u003e\u003cbr\u003edef set_rgb(red, green, blue):\u003cbr\u003e pin0.write_analog(red)\u003cbr\u003e pin1.write_analog(green)\u003cbr\u003e pin2.write_analog(blue)\u003cbr\u003e\u003cbr\u003ewhile True:\u003cbr\u003e set_rgb(255, 0, 0)\u003cbr\u003e sleep(4000)\u003cbr\u003e set_rgb(800, 100, 0)\u003cbr\u003e sleep(1000)\u003cbr\u003e set_rgb(0, 1023, 0)\u003cbr\u003e sleep(5000)\u003cbr\u003e set_rgb(800, 100, 0)\u003cbr\u003e sleep(1000)\u003c\/code\u003e\u003c\/p\u003e","brand":"Monk Makes","offers":[{"title":"Default Title","offer_id":3108766318602,"sku":"MNK00064","price":3.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/RGB_LED_9f6c9283-512e-4f3b-a972-037f98bdbdc9.JPG?v=1530983801"},{"product_id":"bit-commander-console-controller-for-micro-bit","title":"Bit:Commander Console \u0026 Controller for micro:bit","description":"\u003cp\u003eThe Bit:Commander is a great device for powering and experimenting with the BBC micro:bit.\u003c\/p\u003e\n\u003ch2\u003eOverview\u003c\/h2\u003e\n\u003cp\u003eAs well as a battery pack (3 x AA batteries required), the Bit:Commander includes\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eEdge Connector for easy connection of the BBC micro:bit\u003c\/li\u003e\n\u003cli\u003eOn\/off switch\u003c\/li\u003e\n\u003cli\u003eBlue power indicator\u003c\/li\u003e\n\u003cli\u003e6 multi-colour RGB LEDs (aka neopixels)\u003c\/li\u003e\n\u003cli\u003e4 square 12mm push buttons with coloured caps (Red. Yellow, Green, Blue)\u003c\/li\u003e\n\u003cli\u003eAnalog dial input with Min, Max and intermediate markings\u003c\/li\u003e\n\u003cli\u003eAnalog Joystick with X and Y movement and a push switch\u003c\/li\u003e\n\u003cli\u003ePowered miniature speaker\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSuggested uses:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eActing as a remote control for another micro:bit device, such as a Bit:Bot\u003c\/li\u003e\n\u003cli\u003eActing as a self-contained portable (no wires) games console\u003c\/li\u003e\n\u003cli\u003eExperimenting with various Digital and Analog inputs available as well as the speaker and neopixel outputs\u003c\/li\u003e\n\u003cli\u003eEverything is pre-fitted. No wires, soldering or jumpoers to fiddle with\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePin Connections:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSpeaker: Pin 0 (*)\u003c\/li\u003e\n\u003cli\u003eDial: Pin 0 (*)\u003c\/li\u003e\n\u003cli\u003eJoystick X: Pin 1\u003c\/li\u003e\n\u003cli\u003eJoystick Y: Pin 2\u003c\/li\u003e\n\u003cli\u003eJoystick button: Pin 8\u003c\/li\u003e\n\u003cli\u003eNeopixels: Pin 13\u003c\/li\u003e\n\u003cli\u003eRed Button: Pin 12\u003c\/li\u003e\n\u003cli\u003eYellow Button: Pin 16\u003c\/li\u003e\n\u003cli\u003eGreen Button: Pin 14\u003c\/li\u003e\n\u003cli\u003eBlue Button: Pin 15\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e(*) Pin 0 is used both for Speaker output (using the Music or Tone output methods) as well as the Dial analog input. This causes some compromises - most notable of which is that the Dial analog input cannot reach its normal maximum value of 1023 and stops at around 850 instead. As long as the software understands this, then it shouldn't be a problem.\u003c\/p\u003e\n\u003cp\u003eNB. The Bit:Commander is only powered if batteries are fitted and it is switched on. Powering the micro:bit does not power the Bit:Commander. However, when the Bit:Commander is powered up, then it will also power the micro:bit\u003c\/p\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cp\u003eSee \u003ca href=\"https:\/\/4tronix.co.uk\/blog\/?p=1734%20\" target=\"_blank\" title=\"Bit:Commander Blog Post\" rel=\"noopener noreferrer\"\u003ethis Blog Post \u003c\/a\u003efor more information\u003c\/p\u003e\n\u003cp\u003eAlso see Mark Atkinson's excellent site for:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/multiwingspan.co.uk\/micro.php?page=bcpxtintro\" target=\"_blank\" title=\"Block Programming\" rel=\"noopener noreferrer\"\u003eBlocks programming \u003c\/a\u003ewith Bit:Commander\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"http:\/\/multiwingspan.co.uk\/micro.php?page=bcintro\" target=\"_blank\" title=\"MicroPython programming\" rel=\"noopener noreferrer\"\u003eMicroPython programming \u003c\/a\u003ewith Bit:Commander\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":3110505938954,"sku":"4TR-BITCOM","price":13.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/IMG_1812.jpg?v=1525864593"},{"product_id":"sparkfun-gator-bit","title":"SparkFun gator:bit","description":"\u003cp\u003eThe SparkFun gator:bit is an all-in-one “carrier” board for your micro:bit that provides you with a fully functional development and prototyping platform.\u003c\/p\u003e\n\u003cp\u003eAlmost every pin on the micro:bit is broken out to pads that alligator (or crocodile, if you prefer) clips so you can get the most out of it!\u003c\/p\u003e\n\u003cp\u003eWhether it is data visualization using the five on-board addressable LEDs, capacitive touch sensing on pins 0, 1, \u0026amp; 2, or creating musical works of art using the built-in speaker we’ve got it covered with the with the SparkFun gator:bit!\u003c\/p\u003e\n\u003cp\u003eThe major benefit of gator:bit that we have provided is safe access to as many GPIO as possible from the micro:bit. Not only are pins 0, 1, 2, 8, 16, 5 (Button A), and 11 (Button B) broken out, but they are also protected against over voltage and over current\/short circuit. Pins 0, 1, and 2 are ADC pins and are also the capacitive touch pins. Pins 8, 16, 5, and 11 are digital pins capable of read and write. Additionally, pins 13 (SPI), 14(SPI), 15(SPI), 19 (I\u003csup\u003e2\u003c\/sup\u003eC), and 20 (I\u003csup\u003e2\u003c\/sup\u003eC) can be used to read and write whatever digital signals you could want. We go into much more detail about each pin and other attributes (like supplying voltage out, light, and sound) in the SparkFun gator:bit Guide found below. Make sure to check that out!\u003c\/p\u003e\n\u003cp\u003eEach SparkFun gator:bit can be powered from 2.7V - 9V giving you quite a range of powering options. There are two ways of powering your gator:bit, either from the JST battery terminal or the alligator clip pads labeled “VIN”. Any voltage input between 2.7V and 9V will be regulated to 3.3V to power the micro:bit, the speaker, and for use by any of the alligator clip pins.\u003c\/p\u003e\n\u003cp\u003eEven without any external hardware the gator:bit is still an exploratory development board for micro:bit allowing the easiest access to it for educators, beginners, and pro-makers alike.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003emicro:bit card edge connector\u003c\/li\u003e\n\u003cli\u003eInput voltage: 2.7V - 9V\u003c\/li\u003e\n\u003cli\u003e5 built in addressable LEDs\u003c\/li\u003e\n\u003cli\u003eBuilt in buzzer\u003c\/li\u003e\n\u003cli\u003e5V output\u003c\/li\u003e\n\u003cli\u003e3.3V output\u003c\/li\u003e\n\u003cli\u003e7 protected input\/output pins\u003c\/li\u003e\n\u003cli\u003e3 pins for SPI communication\u003c\/li\u003e\n\u003cli\u003e2 pins for I\u003csup\u003e2\u003c\/sup\u003eC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/SparkFun_gator-bit.pdf?17272474274377167512\" target=\"_blank\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/e\/6\/e\/a\/b\/SparkFun_gator-bit_1.zip\" target=\"_blank\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/gatorbit-hookup-guide\" target=\"_blank\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/getting-started-with-the-microbit\" target=\"_blank\"\u003eGetting Started with the micro:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.sparkfun.com\/pages\/microbit\" target=\"_blank\"\u003eAbout micro:bit Page\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/microbit.org\/code\/\" target=\"_blank\"\u003emicro:bit Programmer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/gator_bit\" target=\"_blank\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":3128262918154,"sku":"DEV-14484","price":20.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/14484-SparkFun_gator-bit-01.jpg?v=1526307405"},{"product_id":"noise-bit","title":"noise:bit","description":"\u003cp\u003eMake your \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e sing with noise:bit! It's a tiny speaker that packs a fair bit of punch, and it's perfect for BLEEPS and BLOOPS!\u003c\/p\u003e\n\u003cp\u003eJust slot in your micro:bit, and use the sound generation blocks and code in Microsoft MakeCode and MicroPython to generate tones, sounds, and speech. We've had great fun combining it with a second micro:bit and using \u003ca href=\"\/en-eu\/products\/enviro-bit\" target=\"_blank\"\u003eenviro:bit\u003c\/a\u003e's light sensor and the wireless function to make a radio-controlled theremin!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComes fully-assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eTPA301 amplifier chip\u003c\/li\u003e\n\u003cli\u003e8Ω 2W Mylar speaker\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003eand \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" data-mce-fragment=\"1\" data-mce-href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\"\u003emicro:bit v2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo soldering required!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware \u003c\/h2\u003e\n\u003cp\u003eYou can code noise:bit with the block-based \u003ca href=\"https:\/\/makecode.microbit.org\" target=\"_blank\"\u003eMicrosoft MakeCode editor\u003c\/a\u003e, using its audio generation blocks, if you want to delve deeper, then you can use MicroPython in the \u003ca href=\"https:\/\/codewith.mu\" target=\"_blank\"\u003eMu code editor\u003c\/a\u003e.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":3141221744650,"sku":"PIM356","price":12.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/microbit-addons-sq-3.jpg?v=1531739795"},{"product_id":"enviro-bit","title":"enviro:bit","description":"\u003cp\u003eSense the world around you with enviro:bit! It's loaded with sensors for air and weather, colour and light, and sound, and slots right onto your \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eJust slot in your micro:bit, then code enviro:bit with the block-based \u003ca href=\"https:\/\/makecode.microbit.org\" target=\"_blank\"\u003eMicrosoft MakeCode editor\u003c\/a\u003e, or with MicroPython in the \u003ca href=\"https:\/\/codewith.mu\" target=\"_blank\"\u003eMu code editor\u003c\/a\u003e. The sensors go hand-in-hand really well with the LED matrix on micro:bit, letting you graph sensors readings or have the LEDs react to sound, for example.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComes fully-assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ae-bst.resource.bosch.com\/media\/_tech\/media\/datasheets\/BST-BME280-DS002.pdf\"\u003eBME280\u003c\/a\u003e temperature, pressure, and humidity sensor\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/ams.com\/documents\/20143\/36005\/TCS3472_DS000390_2-00.pdf\"\u003eTCS3472\u003c\/a\u003e light and colour sensor\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/www.mouser.com\/ds\/2\/218\/SPU0410HR5H-PB_revH-876884.pdf\"\u003eMEMS microphone\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003eand \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" data-mce-fragment=\"1\" data-mce-href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\"\u003emicro:bit v2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMicrosoft MakeCode and MicroPython support\u003c\/li\u003e\n\u003cli\u003eNo soldering required!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware \u003c\/h2\u003e\n\u003cp\u003eYou can code enviro:bit with the block-based \u003ca href=\"https:\/\/makecode.microbit.org\" target=\"_blank\"\u003eMicrosoft MakeCode editor\u003c\/a\u003e, that'll get you started with using the sensor readings from enviro:bit, if you want to delve deeper, then you can use MicroPython in the \u003ca href=\"https:\/\/codewith.mu\" target=\"_blank\"\u003eMu code editor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo add the enviro:bit library in MakeCode, click on the cog at the top right hand corner, then \"Add Package\", then search for \"envirobit\". You can find full instructions at the \u003ca href=\"https:\/\/github.com\/pimoroni\/pxt-envirobit\" target=\"_blank\"\u003eGitHub repository for the library\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eOur MicroPython library for enviro:bit is also \u003ca href=\"https:\/\/github.com\/pimoroni\/micropython-envirobit\" target=\"_blank\"\u003eavailable at GitHub\u003c\/a\u003e, again with full instructions on how to get going with it.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":3142289653770,"sku":"PIM355","price":21.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/microbit-addons-sq-2.jpg?v=1531754188"},{"product_id":"automation-bit","title":"automation:bit","description":"\u003cp\u003eControl and monitor your world with automation:bit! It's tolerant of up to 24V, with analog and digital inputs, outputs, and a relay, so it's ideal for automating low-voltage systems in your home.\u003c\/p\u003e\n\u003cp\u003eJust slot in your micro:bit, then code automation:bit with the block-based \u003ca href=\"https:\/\/makecode.microbit.org\" target=\"_blank\"\u003eMicrosoft MakeCode editor\u003c\/a\u003e. Hook up buttons to the inputs, use the built-in buttons on micro:bit, or the light-sensing capability of the LED matrix to control devices connected to automation:bit. Or why not use a second micro:bit's radio function as a remote control?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWARNING! automation:bit should not be used with voltages greater than 24V and especially not with mains voltages!\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComes fully-assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e1 x 24V @ 2A relay (NC and NO terminals)\u003c\/li\u003e\n\u003cli\u003e3 x ADC channels (0-24V range)\u003c\/li\u003e\n\u003cli\u003e3 x 24V tolerant buffered inputs\u003c\/li\u003e\n\u003cli\u003e3 x 24V tolerant sinking outputs\u003c\/li\u003e\n\u003cli\u003e3.5mm screw terminals\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003eand \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" data-mce-fragment=\"1\" data-mce-href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\"\u003emicro:bit v2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMicrosoft MakeCode support\u003c\/li\u003e\n\u003cli\u003eNo soldering required!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware \u003c\/h2\u003e\n\u003cp\u003eYou can code automation:bit with the block-based \u003ca href=\"https:\/\/makecode.microbit.org\" target=\"_blank\"\u003eMicrosoft MakeCode editor\u003c\/a\u003e, that'll get you started with using all of automation:bit's functionality.\u003c\/p\u003e\n\u003cp\u003eTo add the automation:bit library in MakeCode, click on the cog at the top right hand corner, then \"Add Package\", then enter the URL \"https:\/\/github.com\/pimoroni\/pxt-automationbit\". You can find full instructions at the \u003ca href=\"https:\/\/github.com\/pimoroni\/pxt-automationbit\" target=\"_blank\"\u003eGitHub repository for the library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":12556235669587,"sku":"PIM371","price":12.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/automation-bit-lifestyle-1_0266815c-df49-47b5-b159-28a513db409f.jpg?v=1531239385"},{"product_id":"touch-bit","title":"touch:bit","description":"\u003cp\u003eSix handy touch-sensitive buttons and LEDs for your \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e. Use touch:bit as a controller for games on micro:bit's LED matrix, or combine it with the radio functionality and use it as a controller for your robot.\u003c\/p\u003e\n\u003cp\u003eJust slot in your micro:bit, then code touch:bit with the block-based \u003ca href=\"https:\/\/makecode.microbit.org\" target=\"_blank\"\u003eMicrosoft MakeCode editor\u003c\/a\u003e. You can easily link functions to specific button presses, have the LEDs on each button light automatically on a touch, or set the LEDs manually.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComes fully-assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e6 capacitive touch buttons\u003c\/li\u003e\n\u003cli\u003e6 bright white LEDs\u003c\/li\u003e\n\u003cli\u003eCAP1166 capacitive touch and LED driver\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003eand \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" data-mce-fragment=\"1\" data-mce-href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\"\u003emicro:bit v2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eMicrosoft MakeCode and MicroPython support\u003c\/li\u003e\n\u003cli\u003eNo soldering required!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware \u003c\/h2\u003e\n\u003cp\u003eYou can code touch:bit with the block-based \u003ca href=\"https:\/\/makecode.microbit.org\" target=\"_blank\"\u003eMicrosoft MakeCode editor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo add the touch:bit library in MakeCode, click on the cog at the top right hand corner, then \"Add Package\", then paste in the URL for the library: \"https:\/\/github.com\/pimoroni\/pxt-touchbit\". You can find full instructions at the \u003ca href=\"https:\/\/github.com\/pimoroni\/pxt-touchbit\" target=\"_blank\"\u003eGitHub repository for the library\u003c\/a\u003e.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":12925243293779,"sku":"PIM401","price":10.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/touch-bit-lifestyle-2.jpg?v=1539264790"},{"product_id":"7-segment-for-micro-bit","title":"7-segment for micro:bit","description":"\u003cp\u003eThe 7-segment for micro:bit is a four digit 7-segment display for micro:bit. You can use it to display numbers, but it can also display letters and other characters!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEasy to connect (just needs one micro:bit pin plus power)\u003c\/li\u003e\n\u003cli\u003ePowered directly from micro:bit pins\u003c\/li\u003e\n\u003cli\u003eSend messages to the display using the micro:bit’s Serial blocks\u003c\/li\u003e\n\u003cli\u003eUseful for displaying readings from sensors, making clocks etc\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eConnecting to your micro:bit\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/connecting_large.png?v=1536680881\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003eConnect the power pins GND and 3V between the micro:bit and the 7-Segment for micro:bit. Connect the Rx (receive) pin of the 7-Segment for micro:bit to any of the micro:bit’s pins.\u003c\/p\u003e\n\u003ch2\u003eBlock Code Examples\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eDisplay ‘1234’\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis first example displays the number 1234.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/_LiDE26cj4XMt\" target=\"_blank\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/basic_1234-300x232_large.png?v=1536680952\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003eserial redirect to\u003c\/strong\u003e block allows the micro:bit to send (TX) serial messages on pin 0. It sets the RX pin to pin 16, but this is not used. When using the 7-segment display, the micro:bit only transmits messages, it does not receive them.\u003c\/p\u003e\n\u003cp\u003eNote that you need to set \u003cstrong\u003eat baud rate\u003c\/strong\u003e to 9600 as this is the speed of communication that the display is expecting.\u003c\/p\u003e\n\u003cp\u003eThe \u003cstrong\u003epause\u003c\/strong\u003e is necessary after redirecting serial communication to allow time for communication to start.\u003c\/p\u003e\n\u003cp\u003eUsing the \u003cstrong\u003eserial write number\u003c\/strong\u003e block writes a value to the display.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDISPLAY ‘Byte’\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAs well as displaying numbers, you can also display text, although with just seven segments per digit many of the letters and punctuation are very approximate. For example we could display the word ‘Byte’ using the code below.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/_WJLPymRDyd3m\" target=\"_blank\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/basic_byte-300x203_large.png?v=1536681013\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eNote that in this case, we are using the\u003cstrong\u003e serial write string\u003c\/strong\u003e block as we want to display text rather than a number.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eClearing the Display\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you just send text or numbers to the display using \u003cstrong\u003eserial write string\u003c\/strong\u003e or \u003cstrong\u003eserial write number\u003c\/strong\u003e, then each time you send another character it pushes all the currently displayed characters one position to the left and then puts the new character in the right-most position. If you send the special character “\/”, the display will be cleared.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuffered Mode\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIf you want your display to update repeatedly, then just writing new values as described above will result in the display flickering. To avoid this you need to use the display in buffered mode. In this mode, you compose what you want to be displayed and then when you are ready tell the display to change whatever is currently being displayed to what you now want to be displayed.\u003c\/p\u003e\n\u003cp\u003eThe special character “,” (comma) is used to switch the display into buffered mode and also to update the display. The next example uses the display in buffered mode.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCountdown Timer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis timer starts at a number (change n to the number up to 9999 that you want to count down from). When the countdown reaches 0 the message “Done” will be displayed.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/_hC0Max9tDec8\" target=\"_blank\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/countdown_better-1024x968_large.png?v=1536681073\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eThe value of count actually increases from 0 to whatever \u003cstrong\u003en\u003c\/strong\u003e is, but the number displayed is\u003cstrong\u003e n – count\u003c\/strong\u003e, so the number displayed decreases.\u003c\/p\u003e\n\u003cp\u003eEach time around the loop four spaces are sent to the display to clear it of any existing number. This is an alternative to using “\/” but unlike “\/” does not change the display mode back to non-buffered. The number is then sent to the display followed by the “,” (comma) command to tell the display to swap its current contents for the new value.\u003c\/p\u003e\n\u003cp\u003eWhen the count down has finished, the message “done” is displayed. The “\/” at the start of this message puts the display back into non-buffered mode so that a final comma is not needed to refresh the display.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThermometer\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis display is a great companion to the \u003ca href=\"https:\/\/www.monkmakes.com\/mb_sensor\/\"\u003eMonkMakes Sensor for micro:bit\u003c\/a\u003e. In this example, we use this display to show the current temperature.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/thermometer-1024x812_large.png?v=1536681144\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eAs you can see, the micro:bit supplies power to the Sensor board that then supplies power to the display.\u003c\/p\u003e\n\u003cp\u003eHere is the code for the thermometer. Click on it to open it.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/_92EKHzDhJEeR\" target=\"_blank\"\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/thermometer-1-1024x762_large.png?v=1536681188\" alt=\"\"\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eFor more information on how the temperature measurement part of the code works, see \u003ca href=\"https:\/\/www.monkmakes.com\/mb_sensor\/\" target=\"_blank\"\u003ethe Sensor boards page\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eTo display the temperature the display is used in “buffered mode”. The next value to display is first blanked and then the temperature sent to the display followed by “*C,”. The * character displays something close to the degrees symbol and the comma on the end tells the display that now is the time to switch what is displayed to the new message.\u003c\/p\u003e\n\u003ch2\u003eTrouble Shooting\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eProblem\u003c\/strong\u003e: The display is not very bright.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolution\u003c\/strong\u003e: The limited current available from the micro:bit means that the display has to be kept at a low brightness to be able to work. The display will be less bright when using batteries through the battery connector than when using a USB power supply.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eProblem\u003c\/strong\u003e: The display is not refreshing.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSolution\u003c\/strong\u003e: The display takes time to operate and so if you try and refresh it too fast, it can hang. If it does this, introduce a longer delay between refreshes using the \u003cstrong\u003epause\u003c\/strong\u003e block. Momentarily un-clipping the positive power lead to the display will cause it to reset if the display has stopped updating.\u003c\/p\u003e","brand":"Monk Makes","offers":[{"title":"Default Title","offer_id":12933036179539,"sku":"MNK00066","price":12.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/7-seg_3_of_3.JPG?v=1536682571"},{"product_id":"bat-bit-3-battery-pack-for-micro-bit","title":"bat:bit 3 - Battery pack for micro:bit","description":"\u003cp\u003eSimply slide the micro:bit into the connector on the bat:bit 3 and insert 2 AA batteries and you are good to go!\u003c\/p\u003e\n\u003cp\u003eThe bat:bit 3 covers the rear of the micro:bit protecting the test pads from accidental shorts while leaving the reset button and USB connector accessible.\u003c\/p\u003e\n\u003cp\u003eAll of the micro:bits edge connector are broken out to another edge connector so you can still use your existing micro:bit add-ons.\u003c\/p\u003e\n\u003cp\u003eThere is even a handy little power switch on the right of the board, up is off and down is on!\u003c\/p\u003e","brand":"Proto-PIC","offers":[{"title":"Default Title","offer_id":13538064498771,"sku":"PPMB00140","price":7.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/PPMB00140-001.jpg?v=1538662577"},{"product_id":"sparkfun-gator-control-protosnap","title":"SparkFun gator:control ProtoSnap","description":"\u003cp\u003eThe SparkFun gator:control ProtoSnap is one of a series of gator-clippable accessories called gator:boards that have been created to directly interface with the micro:bit or to other micro controllers!\u003c\/p\u003e\n\u003cp\u003eThe gator:control ProtoSnap offers a handful of ways to interact with projects you create using only gator-clip cables. Each little board on this ProtoSnap can be kept as a whole while on the board or broken apart for individual use!\u003c\/p\u003e\n\u003cp\u003eThe gator:control ProtoSnap contains four boards in the main assembly including two buttons, an on\/off slide switch and a reed switch, which is activated by a magnet. A button or switch is something that can act as both an open and closed circuit, and either one makes a great addition to your project if you want to add some form of control to your project. You can use buttons or switches as part of a circuit you’re building, or as a digital input for your micro:bit.\u003c\/p\u003e\n\u003cp\u003eThe pads on either side of the button or switch will be connected while attached to the ProtoSnap. Snapping the board apart can be easily done by twisting each of the control boards side to side until it pops out. This will need to be done if you want to use any of the boards on their own. Keep in mind that the buttons will only close the circuit while it is pressed down; releasing the button opens the circuit.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/gatorcontrol-protosnap-hookup-guide?_ga=2.5984571.92979599.1541594792-708024729.1513008105\" target=\"_blank\"\u003eGet started with the SparkFun gator:control ProtoSnap guide\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eIncluded on the ProtoSnap\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x gator:button Board\u003c\/li\u003e\n\u003cli\u003e1x gator:switch Board\u003c\/li\u003e\n\u003cli\u003e1x gator:reed Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/SparkFun_gatorcontrol_ProtoSnap.pdf?7990780948997911373\" target=\"_blank\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/1\/e\/a\/5\/e\/SparkFun_gatorcontrol_ProtoSnap.zip\" target=\"_blank\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/gatorcontrol-protosnap-hookup-guide\" target=\"_blank\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/gatorbit-hookup-guide\" target=\"_blank\"\u003egator:bit Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/getting-started-with-the-microbit\" target=\"_blank\"\u003eGetting Started with the micro:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/microbit.org\/code\/\" target=\"_blank\"\u003emicro:bit Programmer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/gator_control\" target=\"_blank\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":15388722856019,"sku":"COM-14968","price":10.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/COM-14968-1.jpg?v=1541676640"},{"product_id":"sparkfun-gator-color-protosnap","title":"SparkFun gator:color ProtoSnap","description":"\u003cp\u003eThe SparkFun gator:color ProtoSnap is one of a series of gator-clippable accessories called gator:boards created to directly interface with the micro:bit or to other micro controllers!\u003c\/p\u003e\n\u003cp\u003eThe gator:color ProtoSnap is perfect if you want to add a low-profile, glowing component to your project. It is equipped with six LED boards that can be kept as a whole or broken apart for individual use!\u003c\/p\u003e\n\u003cp\u003eIncluded on each board are two white LED boards; a single red board, green board, blue board and yellow board; and a power rail. Since this is a ProtoSnap, the board has power tabs broken out on the edges so it doesn’t have to be broken apart to light up the individual LEDs. Snapping the board apart can be easily done by twisting each of the LED boards side to side until it pops out and will need to be done if you want to light any of the LEDs on their own.\u003c\/p\u003e\n\u003cp\u003eThe LEDs can be powered one of two ways. The first simply turns the LED on, and is done by clipping the - side of the LED to ground on the micro:bit, and connecting the + to 3V on the micro:bit. The other way to control these LEDs is to connect to pins 0, 1 and 2. Doing this will allow you to turn the LEDs on and off with the micro:bit, as well as change the brightness level!\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/gatorcolor-protosnap-hookup-guide\" class=\"btn btn-default\"\u003eGet started with the SparkFun gator:color ProtoSnap guide\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003eIncluded on the ProtoSnap\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2x White gator:LED Board\u003c\/li\u003e\n\u003cli\u003e1x Red gator:LED Board\u003c\/li\u003e\n\u003cli\u003e1x Green gator:LED Board\u003c\/li\u003e\n\u003cli\u003e1x Blue gator:LED Board\u003c\/li\u003e\n\u003cli\u003e1x Yellow gator:LED Board\u003c\/li\u003e\n\u003cli\u003e1x Power Rail Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/SparkFun_gatorcolor_ProtoSnap.pdf?16773383671420034131\" target=\"_blank\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/d\/f\/9\/1\/c\/SparkFun_gatorcolor_ProtoSnap.zip\" target=\"_blank\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/gatorcolor-protosnap-hookup-guide\" target=\"_blank\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/gatorbit-hookup-guide\" target=\"_blank\"\u003egator:bit Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/getting-started-with-the-microbit\" target=\"_blank\"\u003eGetting Started with the micro:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/microbit.org\/code\/\" target=\"_blank\"\u003emicro:bit Programmer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/gator_color\" target=\"_blank\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":15388734160979,"sku":"COM-14890","price":10.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/COM-14890-1.jpg?v=1541676638"},{"product_id":"sparkfun-gator-starter-protosnap","title":"SparkFun gator:starter ProtoSnap","description":"\u003cp\u003eThe SparkFun gator:starter ProtoSnap is one of a series of gator-clippable accessories called gator:boards that have been created to directly interface with the micro:bit or to other micro controllers!\u003c\/p\u003e\n\u003cp\u003eThe gator:starter ProtoSnap provides you with a starting point to go beyond the capabilities of the micro:bit, with three different boards that can be kept as a whole or broken apart for individual use!\u003c\/p\u003e\n\u003cp\u003eIncluded on each gator:starter is a temperature sensor board, a light sensor board and an RGB LED board. Since this is a ProtoSnap, we’ve broken out the power so it can be clipped to on the edge of the gator:starter to power the board without breaking each individual sensor or LED. Snapping the board apart can be easily done by twisting each of the LED boards side to side until it pops out and will need to be done if you want to light any of the LEDs on their own.\u003c\/p\u003e\n\u003cp\u003eThere are also power tabs available on the two sensors and the LED if you choose to break the gator:starter into its basic components. If you don’t break the board apart however, you’ll still be able to interface with all of the sensor and light pins, which are broken out with a dual hole design to allow clipping from above.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/gatorstarter-protosnap-hookup-guide\" class=\"btn btn-default\" target=\"_blank\"\u003eGet started with the SparkFun gator:starter ProtoSnap guide\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eIncluded on the ProtoSnap\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1x gator:temperature Board (MCP9700)\u003c\/li\u003e\n\u003cli\u003e1x gator:light Board (TEMT6000)\u003c\/li\u003e\n\u003cli\u003e1x gator:RGB Board\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/SparkFun_gatorstarter_ProtoSnap.pdf?6417809449671914901\" target=\"_blank\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/4\/8\/e\/2\/5\/SparkFun_gatorstarter_ProtoSnap.zip\" target=\"_blank\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/gatorstarter-protosnap-hookup-guide\" target=\"_blank\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/gatorbit-hookup-guide\" target=\"_blank\"\u003egator:bit Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/getting-started-with-the-microbit\" target=\"_blank\"\u003eGetting Started with the micro:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"http:\/\/microbit.org\/code\/\" target=\"_blank\"\u003emicro:bit Programmer\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/gator_starter\" target=\"_blank\"\u003eGitHub\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":15388742942803,"sku":"SEN-14891","price":9.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/SEN-14891-1.jpg?v=1541676641"},{"product_id":"robo-bit-mk3-buggy-for-the-micro-bit","title":"Robo:Bit Mk3 - buggy for the micro:bit","description":"\u003cp\u003eRobo:Bit Mk3 DIY Buggy for the micro:bit\u003c\/p\u003e\n\u003cp\u003eVersion 1.3 of this popular kit now uses a removable ultrasonic sensor, that uses the same connector as used on the Minibit and BitBot XL. This allows the use of alternative addons, sich as the new \u003ca href=\"\/en-eu\/products\/bitface-robot-face-breakout\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eBitFace\u003c\/a\u003e, \u003ca href=\"\/en-eu\/products\/fireled-5x5-matrix-breakout\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e5x5 FireLed Matrix\u003c\/a\u003e and \u003ca href=\"\/en-eu\/products\/128-x-64-monochrome-oled-breakout\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eOLED\u003c\/a\u003e.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThe Robobit Makecode package supports all versions of the Robobit Buggy\u003c\/p\u003e\n\u003cp\u003eThis little buggy can be assembled very quickly using only a screwdriver. No soldering is required\u003c\/p\u003e\n\u003cp\u003eFor assembly and programming tips, please \u003ca href=\"https:\/\/4tronix.co.uk\/robobit3\/\" target=\"_blank\" title=\"Robobit Buggy Mk3 Assembly and Programming\" rel=\"noopener noreferrer\"\u003esee here\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2\u003e Mk3 changes from Mk2:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIntegrated line following sensors\u003c\/li\u003e\n\u003cli\u003eIntegrated ultrasonic distance sensor with new connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated pen holder mounted at the axis of rotation\u003c\/li\u003e\n\u003cli\u003eIntegrated 8 element FireLed bar with “auto scanner” software support\u003c\/li\u003e\n\u003cli\u003eMotors fitted on top to make it more compact\u003c\/li\u003e\n\u003cli\u003eScrewdriver and wrench tools included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRobo:Bit Mk3 robotics controller PCB\u003c\/li\u003e\n\u003cli\u003eBattery holder PCB\u003c\/li\u003e\n\u003cli\u003eFixings pack (motor mounts, screws, mounting pillars, caster, etc.)\u003c\/li\u003e\n\u003cli\u003e2 x Yellow Wheels with Tyres\u003c\/li\u003e\n\u003cli\u003e2 x Motors with pre-fitted connection wires (no soldering required)\u003c\/li\u003e\n\u003cli\u003eScrewdriver and wrench\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eUsing this great kit you can learn about:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eControlling motors with simple Forwards \/ Reverse controls\u003c\/li\u003e\n\u003cli\u003eControlling the speed of motors in both directions using PWM\u003c\/li\u003e\n\u003cli\u003eUse a second micro:bit with the easy-to-use radio software to control the buggy\u003c\/li\u003e\n\u003cli\u003eUse the motion sensor on the micro:bit to detect collision with obstacles and avoid them\u003c\/li\u003e\n\u003cli\u003eDetect when obstacles get close and change the program to avoid the obstacles\u003c\/li\u003e\n\u003cli\u003e\"Follow-Me\" program that tries to stay a certain distance from the object in front\u003c\/li\u003e\n\u003cli\u003eUse the 2 line sensors either side of the non-reflective line to detect the line and keep the buggy on track\u003c\/li\u003e\n\u003cli\u003eWrite more complex programs that behave as required if you meet a T-Junction or crossing of lines\u003c\/li\u003e\n\u003cli\u003eCompare different line following strategies - create a race-track and see which strategy is fastest\u003c\/li\u003e\n\u003cli\u003eIn combination with the distance sensor, make it avoid obstacles on the track and then re-acquire the line\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":21214358077523,"sku":"4TR-RBITBUG3","price":33.75,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/IMG_2616_Plain_6ca7d1d6-4741-4273-b4cf-02a7e24b48ac.jpg?v=1543591797"},{"product_id":"power-for-micro-bit","title":"Power for micro:bit","description":"\u003cp\u003eThis tiny board has a standard DC barrel jack socket at one end and provides a regulated 3.3V output that you can use to power your micro:bit using the JST battery connector attached to wires coming from the other end of the board.\u003c\/p\u003e\n\u003cp\u003eYou might want to use a MonkMakes Power for micro:bit board if you want to use a AC to DC adapter, solar panels, or other sources of power that are not the 3V or so that the micro:bit is expecting. The Power for micro:bit will accept an input voltage of 4.5 to 12V DC from its standard DC barrel jack socket and convert it into a pleasantly regulated 3.3V for your micro:bit.\u003c\/p\u003e\n\u003cp\u003eThe advantages of using a Power for micro:bit instead of say a USB 5V power supply are firstly that some USB 5V adaptors can cause problems with the micro:bit (\u003ca href=\"https:\/\/microbit.org\/guide\/safety-guide-page\/\" target=\"_blank\"\u003esee micro:bit’s safety guidelines\u003c\/a\u003e) and secondly because the micro:bit’s battery connector is connected directly to the 3V alligator clip-able connector of the micro:bit, you can supply other things that are connected to the micro:bit with a lot more than the allowed 90mA. In fact you can supply up to 700mA. This makes the board great for use with things like NeoPixel strips or servomotors that need a bit more current.\u003c\/p\u003e\n\u003cp\u003eCompatible with micro:bit v1 and v2!\u003c\/p\u003e\n\u003ch2\u003eAC Power\u003c\/h2\u003e\n\u003cp\u003eIf you need to power your micro:bit project for long periods of time, then you are going to get sick of changing the batteries all the time. By using an AC adapter (not included, but 6V recommended) you can power  your micro:bit indefinitely.\u003c\/p\u003e\n\u003ch2\u003eHigher micro:bit 3V output Current\u003c\/h2\u003e\n\u003cp\u003eWhen powered from USB power, your micro:bit can only supply a maximum of 90mA of current through its 3V connector. This means that powering Neopixel LED displays or servomotors that need more current, may not work, or be reliable. The MonkMakes Power for micro:bit boosts this maximum output current to a much more respectable 700mA. Enough to power far more Neopixels (the exact number depends on LED brightness).\u003c\/p\u003e\n\u003ch2\u003eUsing Bigger Batteries\u003c\/h2\u003e\n\u003cp\u003eThe standard AAA battery pack works well, but will only last for a few days of continuous use of the micro:bit. By using the Power for micro:bit with a bigger battery pack with a DC barrel jack (you can achieve much greater battery life). For example, using a 4 x AA battery pack should provide roughly 4 times the battery life that you would expect from a AAA battery pack.\u003c\/p\u003e\n\u003ch2\u003eSpecification\u003c\/h2\u003e\n\u003cp\u003eInput connector: 2.1mm DC barrel jack connector positive center connector.\u003c\/p\u003e\n\u003cp\u003eOutput connector: JST-2.0mm on flying leads\u003c\/p\u003e\n\u003cp\u003eVoltage regulator IC: \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/LD1117V33.pdf?14244515407396071088\" target=\"_blank\"\u003eLD1117-3.3V – datasheet \u003c\/a\u003e\u003c\/p\u003e","brand":"Monk Makes","offers":[{"title":"Default Title","offer_id":21228269830227,"sku":"MNK00074","price":7.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/Power_dabec7aa-4068-4f9b-88b4-61c74adacdfe.JPG?v=1549373315"},{"product_id":"servo-for-micro-bit","title":"Servo for micro:bit","description":"\u003cp\u003eThe MonkMakes Servo for micro:bit board provides a really easy way to attach up to three servomotors to a BBC micro:bit. The board requires a power supply or battery pack to provide 5 or 6V to the servomotors. It includes a voltage regulator that will supply 3V back to the micro:bit, so that you don’t have to power it separately.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eHeader pins for three servo motors\u003c\/li\u003e\n\u003cli\u003eUp to 2A total can be supplied to the servo motors\u003c\/li\u003e\n\u003cli\u003eRegulated 3V output to power your micro:bit\u003c\/li\u003e\n\u003cli\u003ePolarity protection for the servomotors\u003c\/li\u003e\n\u003cli\u003eElectrolytic reservoir capacitor for the servomotors\u003c\/li\u003e\n\u003cli\u003e1kΩ series resistors to the control signals to prevent accidental sort-circuits of the micro:bit’s output pins.\u003c\/li\u003e\n\u003cli\u003eOrange LED to indicate that the Servo for micro:bit board has power.\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConnections\u003c\/h2\u003e\n\u003cp\u003eThe picture below shows a typical setup using the Servo for micro:bit board.\u003c\/p\u003e\n\u003cp style=\"text-align: left;\"\u003e\u003cimg alt=\"\" src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/kit_in_action-web-1024x950_large.jpg?v=1544195133\" style=\"float: none;\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe following connections have been made:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e3 x servomotors plugged into header pins. These need to be the right way around, with the control signal (yellow or orange wire) to the left (pins marked c).\u003c\/li\u003e\n\u003cli\u003eAlligator clip lead from GND on the micro:bit to GND on the Servo for micro:bit board.\u003c\/li\u003e\n\u003cli\u003eOptional alligator clip lead from 3V on the micro:bit to 3V on the Servo for micro:bit board. You only need this if you want to power the micro:bit from the same battery pack as the servomotors. If you want to power the micro:bit over USB or the JST battery connector then you do not need this connection.\u003c\/li\u003e\n\u003cli\u003eAlligator clip leads between P0, P1, P2 on the micro:bit to the Servo for micro:bit board. These need to match up with the servomotors you are using, so if you only need the board for one servomotor, then just connect P0 on the micro:bit to P0 on the Servo for micro:bit and make sure that there is a servomotor attached to the header pins marked 0.\u003c\/li\u003e\n\u003cli\u003ePower to the screw terminal on the Servo for micro:bit. Typically this will be a 4xAA battery pack or other power supply. Make sure that the positive lead goes to the screw terminal marked with a +\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eTest Software\u003c\/h2\u003e\n\u003cp\u003eTo check that everything is working, \u003ca href=\"https:\/\/makecode.microbit.org\/_86KWdwTs9VRo\" target=\"_blank\"\u003ethis Blocks code project\u003c\/a\u003e will get you started. Flash it onto your Servo for micro:bit and the servo arms should all start waggling in a random manner. You can \u003ca href=\"https:\/\/youtu.be\/OmSaKAFJDIU\" target=\"_blank\"\u003esee a video of this \u003c\/a\u003ein action here.\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/microbit-screenshot-1024x705_large.png?v=1544195210\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003eThe servo write pin block allows you to set the angle of the servomotor’s arm between 0 and 180 degrees. Note that servomotors, will not usually travel a full 180 degrees so you may find the actual range is more like 10 to 170 degrees.\u003c\/p\u003e","brand":"Monk Makes","offers":[{"title":"Default Title","offer_id":21228372492371,"sku":"MNK00073","price":7.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/Servo.JPG?v=1549380578"},{"product_id":"scroll-bit-micro-bit-kit","title":"scroll:bit micro:bit Kit","description":"\u003cp\u003eBuild and code your own wearable bear badge with our scroll:bit micro:bit kit. Hang it around your neck and code it to be a name badge, fortune teller, or tilt-activated ghost.\u003c\/p\u003e\n\u003cp\u003eOur \u003ca href=\"\/en-eu\/collections\/pimoroni-bit-kits\" target=\"_blank\"\u003ePimoroni bit:kits\u003c\/a\u003e make it simple for anyone to get started with making and coding! They contain everything* you need to build them, learn how to use them, and code them. They include friendly instruction cards, a cable to connect and code the micro:bit, and a battery pack to keep your code running when you've disconnected from your computer.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Just add a desktop or tablet computer to code your micro:bit\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKit contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNow contains \u003ca href=\"https:\/\/pimoroni-2.myshopify.com\/products\/new-micro-bit-v2\" target=\"_blank\"\u003e\u003cstrong\u003emicro:bit v2\u003c\/strong\u003e\u003c\/a\u003e!\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/scroll-bit\" target=\"_blank\"\u003ePimoroni scroll:bit board\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eBear badge acrylic pieces\u003c\/li\u003e\n\u003cli\u003eSpare t-shirts (purple, orange, green)\u003c\/li\u003e\n\u003cli\u003eColourful Pimoroni lanyard\u003c\/li\u003e\n\u003cli\u003eBattery box (includes 2x AAA batteries)\u003c\/li\u003e\n\u003cli\u003eMicro-USB cable\u003c\/li\u003e\n\u003cli\u003eInstruction\/activity cards\u003c\/li\u003e\n\u003cli\u003eSticker sheet\u003c\/li\u003e\n\u003cli\u003eReusable kit box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eActivities included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBuilding your bear badge\u003c\/li\u003e\n\u003cli\u003eInstalling the scroll:bit library\u003c\/li\u003e\n\u003cli\u003eDisplaying words on scroll:bit\u003c\/li\u003e\n\u003cli\u003eCoding a fortune teller\u003c\/li\u003e\n\u003cli\u003eCoding a tilt-controlled ghost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003escroll:bit features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComes fully-assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e17x7 matrix of bright white pixels (119 total)\u003c\/li\u003e\n\u003cli\u003eIndividual PWM brightness control of each pixel\u003c\/li\u003e\n\u003cli\u003eUses the IS31FL3731 LED matrix driver chip\u003c\/li\u003e\n\u003cli\u003eMicrosoft MakeCode support\u003c\/li\u003e\n\u003cli\u003eNo soldering required!\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":21357063864403,"sku":"PIM362","price":38.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/micro-bit-kits-shop-1.jpg?v=1547225563"},{"product_id":"enviro-bit-micro-bit-kit","title":"enviro:bit micro:bit Kit","description":"\u003cp\u003eMake a friendly weather station to sit on your windowsill, that keeps track of temperature, pressure, humidity, light and colour, and sound. A perfect way to introduce kids to sensors and science.\u003c\/p\u003e\n\u003cp\u003eOur \u003ca href=\"\/en-eu\/collections\/pimoroni-bit-kits\" target=\"_blank\"\u003ePimoroni bit:kits\u003c\/a\u003e make it simple for anyone to get started with making and coding! They contain everything* you need to build them, learn how to use them, and code them. They include friendly instruction cards, a cable to connect and code the micro:bit, and a battery pack to keep your code running when you've disconnected from your computer.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Just add a desktop or tablet computer to code your micro:bit\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKit contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eNow contains \u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\"\u003e\u003cstrong\u003emicro:bit v2\u003c\/strong\u003e\u003c\/a\u003e!\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/enviro-bit\" target=\"_blank\"\u003ePimoroni enviro:bit board\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eWeather station acrylic pieces\u003c\/li\u003e\n\u003cli\u003eBattery box (includes 2x AAA batteries)\u003c\/li\u003e\n\u003cli\u003eMicro-USB cable\u003c\/li\u003e\n\u003cli\u003eInstruction\/activity cards\u003c\/li\u003e\n\u003cli\u003eSticker sheet\u003c\/li\u003e\n\u003cli\u003eReusable kit box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eActivities included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eBuilding your weather station\u003c\/li\u003e\n\u003cli\u003eInstalling the enviro:bit library\u003c\/li\u003e\n\u003cli\u003eCoding a weather station\u003c\/li\u003e\n\u003cli\u003eCoding a noise-meter\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eenviro:bit features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComes fully-assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eBME280 temperature, pressure, and humidity sensor\u003c\/li\u003e\n\u003cli\u003eTCS3472 light and colour sensor\u003c\/li\u003e\n\u003cli\u003eMEMS microphone\u003c\/li\u003e\n\u003cli\u003eMicrosoft MakeCode support\u003c\/li\u003e\n\u003cli\u003eNo soldering required!\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":21357605453907,"sku":"PIM364","price":38.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/micro-bit-kits-shop-2.jpg?v=1638204389"},{"product_id":"mini-mu-speaker","title":"MINI.MU Speaker","description":"\u003cp\u003eThis handy little speaker with onboard analogue amplifier works great with micro:bit, and it's sewable and croc-clippable!\u003c\/p\u003e\n\u003cp\u003eWe use this little speaker in our \u003ca href=\"\/en-eu\/products\/mini-mu-glove-kit\" target=\"_blank\"\u003eMINI.MU kits\u003c\/a\u003e, and it's an ideal way to add some sound to your micro:bit projects, no soldering required.\u003c\/p\u003e\n\u003cp\u003eJust use \u003ca href=\"\/en-eu\/products\/crocodile-leads-set-of-10\" target=\"_blank\"\u003ecroc. clips\u003c\/a\u003e, or some \u003ca href=\"\/en-eu\/products\/conductive-thread-3m\" target=\"_blank\"\u003econductive thread\u003c\/a\u003e, to connect the three labelled pads on the speaker to the same pads on your micro:bit and you're good to go! Bleep! Bloop!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComes fully-assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eTPA301 amplifier chip\u003c\/li\u003e\n\u003cli\u003e8Ω 2W Mylar speaker\u003c\/li\u003e\n\u003cli\u003eReverse polarity protection\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003eand \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" data-mce-fragment=\"1\" data-mce-href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\"\u003emicro:bit v2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo soldering required\u003c\/li\u003e\n\u003cli\u003eDimensions: 51.5x38x10.5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eYou can code the MINI.MU speaker with the block-based \u003ca href=\"https:\/\/makecode.microbit.org\" target=\"_blank\"\u003eMicrosoft MakeCode editor\u003c\/a\u003e, using its audio generation blocks. If you want to delve deeper, then you can use MicroPython in the \u003ca href=\"https:\/\/codewith.mu\" target=\"_blank\"\u003eMu code editor\u003c\/a\u003e.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":21748129431635,"sku":"PIM402","price":11.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/MINI.MU_Speaker_1_of_3_98951fbc-bc01-433e-a457-0223e26f1fa4.JPG?v=1551799570"},{"product_id":"micro-bit-in-wonderland-coding-craft-with-the-bbc-micro-bit","title":"micro:bit in Wonderland - Coding \u0026 Craft with the BBC micro:bit","description":"\u003cp\u003e\u003ci\u003e“Why,” said the Dodo, “the best way to explain it is to do it.”\u003c\/i\u003e Come down the rabbit hole and modernise the White Rabbit’s pocket watch, program the Lobster Quadrille dance, create an anger monitor for the Queen of Hearts and lots more!\u003c\/p\u003e\n\u003cp\u003e\u003ci\u003emicro:bit in Wonderland\u003c\/i\u003e is a project book for the BBC micro:bit inspired by the classic story of a little girl named Alice. Her journey in \u003ci\u003eAlice's Adventures in Wonderland\u003c\/i\u003e by Lewis Carroll, provide a perfect backdrop to learn coding and craft skills through project-based learning.\u003c\/p\u003e\n\u003cp\u003eCreate 12 interactive projects, inspired by Lewis Carroll’s classic story \u003ci\u003eAlice’s Adventures in Wonderland\u003c\/i\u003e, and learn how to program the BBC micro:bit mini computer using block-based coding. Gradually build modern skills as you learn about wearables, electronic games, e-textiles, electronics circuits, digital music, animation and much more.\u003c\/p\u003e\n\u003cp\u003eThe projects are suitable for beginners aged 9 and over (including teens and adults). Younger children will require adult assistance, whereas older learners can work more independently using the easy-to-follow, step-by-step instructions with colour illustrations and photographs. Additional instructions, templates and bonus content are available to make things easy for parents and teachers.\u003c\/p\u003e\n\u003cp\u003eThe hands-on projects use simple, inexpensive electronics and everyday household and craft materials. The book provides a playful introduction for families new to coding, electronics and the BBC micro:bit. As you make each project you will develop important creative and computational thinking skills to enable you to imagine, design and create your own projects.\u003c\/p\u003e\n\u003ch2\u003eAbout the Authors\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eTracy Gardner\u003c\/strong\u003e has a PhD in Computer Science and \u003cstrong\u003eElbrie de Kock\u003c\/strong\u003e has an Interior Design degree. They both love making with craft and tech and are advocates for the STEAM and Maker movements which aim to develop skills relevant to modern children. They hope \u003ci\u003emicro:bit in Wonderland\u003c\/i\u003e offers a springboard to develop modern skills, understand the digital world around you and explore technology and electronics in a creative way.\u003c\/p\u003e\n\u003ch2\u003eAbout Tech Age Kids\u003c\/h2\u003e\n\u003cp\u003eTech Age Kids writes content for parents and educators to help them guide kids towards constructive and creative uses of technology. They believe that modern kids should develop skills in coding, electronics and design so that they can understand the present and make the future. They're advocates of the STEAM, Maker and Digital Making movements.\u003c\/p\u003e\n\u003cp\u003eOn the Tech Age Kids website you’ll find approachable \u003ca href=\"http:\/\/www.techagekids.com\/p\/projects.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eproject ideas\u003c\/a\u003e, \u003ca href=\"http:\/\/www.techagekids.com\/p\/news.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003enews\u003c\/a\u003e and \u003ca href=\"http:\/\/www.techagekids.com\/p\/reviews.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ereviews\u003c\/a\u003e of the latest educational and creative kid tech products and advice on \u003ca href=\"http:\/\/www.techagekids.com\/p\/parenting.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003edigital parenting\u003c\/a\u003e issues.\u003c\/p\u003e","brand":"Tech Age Kids","offers":[{"title":"Default Title","offer_id":21798209388627,"sku":"BK0801","price":22.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/MIW_BK1_2nd_Edition_Front_Cover.jpg?v=1554117953"},{"product_id":"noise-bit-micro-bit-kit","title":"noise:bit micro:bit Kit","description":"\u003cp\u003eSew and code a sleepy lion with our noise:bit micro:bit kit. Be careful not to shake the lion or you'll wake it up and make it roar! You can even make your lion sing (code it to play songs)!\u003c\/p\u003e\n\u003cp\u003eOur \u003ca href=\"\/en-eu\/collections\/pimoroni-bit-kits\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePimoroni bit:kits\u003c\/a\u003e make it simple for anyone to get started with making and coding! They contain everything* you need to build them, learn how to use them, and code them. They include friendly instruction cards, a cable to connect and code the micro:bit, and a battery pack to keep your code running when you've disconnected from your computer.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e*Just add a desktop or tablet computer to code your micro:bit\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eKit contents\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003e\u003cstrong\u003emicro:bit v2\u003c\/strong\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/noise-bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ePimoroni noise:bit board\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eSleepy lion felt pieces\u003c\/li\u003e\n\u003cli\u003eYellow embroidery thread\u003c\/li\u003e\n\u003cli\u003eSewing needles\u003c\/li\u003e\n\u003cli\u003eBattery box (includes 2x AAA batteries)\u003c\/li\u003e\n\u003cli\u003eMicro-USB cable\u003c\/li\u003e\n\u003cli\u003eInstruction\/activity cards\u003c\/li\u003e\n\u003cli\u003eSticker sheet\u003c\/li\u003e\n\u003cli\u003eReusable kit box\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eActivities included\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eSewing your sleepy lion\u003c\/li\u003e\n\u003cli\u003eMaking sounds with MakeCode\u003c\/li\u003e\n\u003cli\u003eDon't wake the lion!\u003c\/li\u003e\n\u003cli\u003ePlaying a tune\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003enoise:bit features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComes fully-assembled and ready to use\u003c\/li\u003e\n\u003cli\u003eTPA301 amplifier chip\u003c\/li\u003e\n\u003cli\u003e8Ω 2W Mylar speaker\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emicro:bit\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo soldering required!\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":27843989536851,"sku":"PIM363","price":36.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/microbit-kits-shop-10.jpg?v=1556184140"},{"product_id":"pinbetween","title":"Pinbetween","description":"\u003cp\u003ePinbetween gives you access to all of the micro:bit's pins at the same time as using an edge-connector add-on, and it's completely solderless!\u003c\/p\u003e\n\u003cp\u003eThe 40-pin male header on Pinbetween lets you use \u003ca href=\"\/en-eu\/?q=cab00\" target=\"_blank\"\u003ejumper jerky\u003c\/a\u003e to connect extra bits to your micro:bit while using an edge-connector add-on like our \u003ca href=\"\/en-eu\/products\/enviro-bit\" target=\"_blank\"\u003eenviro:bit\u003c\/a\u003e, for example.\u003c\/p\u003e\n\u003cp\u003ePlug your micro:bit into the edge-connector at the top, attach your \u003ca href=\"\/en-eu\/collections\/pimoroni-micro-bit-add-ons\"\u003emicro:bit add-on\u003c\/a\u003e at the bottom, and then use the handily grouped and labelled pins in-between for whatever you wish!\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eNote: micro:bit, enviro:bit, breadboard, etc. pictured are \u003cstrong\u003enot\u003c\/strong\u003e included!\u003c\/em\u003e\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eComes fully-assembled and ready to use\u003c\/li\u003e\n\u003cli\u003e40-pin male header for use with \u003ca href=\"\/en-eu\/?q=cab00\" target=\"_blank\"\u003ejumper jerky\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eGrouped and labelled pins\u003c\/li\u003e\n\u003cli\u003ePlenty of power pins (9x 3V, 12x ground)\u003c\/li\u003e\n\u003cli\u003eMale edge connector for \u003ca href=\"\/en-eu\/collections\/pimoroni-micro-bit-add-ons\" target=\"_blank\"\u003emicro:bit add-ons\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e \u003cspan data-mce-fragment=\"1\"\u003eand \u003c\/span\u003e\u003cspan data-mce-fragment=\"1\"\u003e\u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" data-mce-fragment=\"1\" data-mce-href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\"\u003emicro:bit v2\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo soldering required!\u003c\/li\u003e\n\u003cli\u003eDimensions: 56x41.5x12mm\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":27909570494547,"sku":"PIM457","price":6.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/pinbetween-2.jpg?v=1564327338"},{"product_id":"klip-motor-driver-for-micro-bit","title":"Klip Motor Driver for micro:bit","description":"\u003cp\u003eThe Klip Motor Driver for microbit allows you do more than just drive motors. It breaks out pins 0, 1, 2, 3V \u0026amp; GND from the microbit \u0026amp; connects to ZIP LEDS.\u003c\/p\u003e\n\u003cp\u003eAll of these pads are designed specifically for use with crocodile clips and banana plugs. That means no soldering or fiddling with connection blocks. Also, the pads have been designed and spaced to make it difficult to short two together with crocodile clips. This makes it ideal for use with younger children who can build buggies with little more than a couple of motors, a chassis, some elastic bands and the clip motor driver. .\u003c\/p\u003e\n\u003cp\u003eIt can run two DC motors simultaneously, both clockwise and counter-clockwise, and at varying speeds.\u003c\/p\u003e\n\u003cp\u003eThe board also features status LEDs. There are LEDs for board powered on, pins 0, 1, 2, 3 and also the two motor outputs. The motor indicator LEDs don't just monitor activity, they also indicate which direction each motor is running in, green for forwards and red for backwards. These LEDs don't just look nice, they are a great way of visually troubleshooting your code and they even allow you test your code without having to connect motors or devices to pins 0, 1, 2, 3.\u003c\/p\u003e\n\u003cp\u003ePower is provided via the integrated battery supply (3 x AA, 4.5V), and the board then produces a regulated 3.3V supply which is fed into the 3V and GND connections to power the connected micro:bit, removing the need to power the micro:bit separately.\u003c\/p\u003e\n\u003cp\u003eKitronik have produced a set of custom blocks for the MakeCode editor to simplify using the Klip Motor Driver. To add them to the editor, select the cog icon in the top right of the editor. Then, select Extensions from the drop down menu and in the search bar type and enter Kitronik. Pick the tile from the list and the new blocks will be added to the menu in the editor. They've also included blocks within this package for driving any ZIP LEDs you attach to the board. These are primarily for allowing younger children to write code using blocks that are easier to use other coding blocks for addressable LEDs.\u003c\/p\u003e\n\u003ch2\u003eNote:\u003c\/h2\u003e\n\u003cp\u003eIf the micro:bit is powered via its USB connector, and there are no batteries inserted, there will be no power at the 3V output connection – this is to provide some overcurrent protection for the micro:bit.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDrive 2 x DC Motors simultaneously, both clockwise and counter-clockwise.\u003c\/li\u003e\n\u003cli\u003eIt breaks out Pins 0, 1, 2, 3V and GDN (just like the main pads on the micro:bit itself).\u003c\/li\u003e\n\u003cli\u003eConnect to the pads with crocodile clips and banana plugs.\u003c\/li\u003e\n\u003cli\u003eThere is also an out put design specifically for ZIP LEDs.\u003c\/li\u003e\n\u003cli\u003ePower is provided via the integrated battery supply.\u003c\/li\u003e\n\u003cli\u003eOutput and motor driver status lights for troubleshooting and testing code prior to attaching motors and devices.\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Klip Motor Driver for the micro:bit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 72mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 70mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/crocodile-leads-set-of-10\" target=\"_blank\"\u003eCrocodile Clips\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e3 x AA Batteries.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Klip User Guide PDF\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5655-klip-motor-user-guide.pdf\" target=\"_blank\"\u003eKlip User Guide\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Klip Datasheet PDF\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5655-klip-motor-microbit-datasheet.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/KitronikLtd\/pxt-kitronik-klip-motor\" target=\"_blank\"\u003eKlip MakeCode Extension on GitHub\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/KitronikLtd\/micropython-microbit-kitronik-klip-motor\" target=\"_blank\"\u003eMicroPython Code example\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eElectrical characteristics:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOperating Voltage (Vcc): 4.5V (3 x AA batteries).\u003c\/li\u003e\n\u003cli\u003eRegulated Voltage (supply BBC micro:bit): 3.3V.\u003c\/li\u003e\n\u003cli\u003eMax Current (@ rated Vcc):\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e6A (Total from switched supply)\u003c\/li\u003e\n\u003cli\u003e150mA (Total from 3V output, allowing 100mA for BBC micro:bit)\u003c\/li\u003e\n\u003cli\u003e15mA (Total from BBC micro:bit IO pins at any one time)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCroc-clip Connections:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 3.3V Output\u003c\/li\u003e\n\u003cli\u003e1 x V Output (battery voltage)\u003c\/li\u003e\n\u003cli\u003e2 x GND\u003c\/li\u003e\n\u003cli\u003e3 x BBC micro:bit IO Pins (Pins 0, 1 and 2)\u003c\/li\u003e\n\u003cli\u003e1 x ZIP LED Signal Output\u003c\/li\u003e\n\u003cli\u003e2 x Motor Outputs (2 channels each)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":27921472356435,"sku":"KIT-5655","price":12.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5655_additional-klip-clipable-motor-driver-board-microbit-inserted.jpg?v=1559838060"},{"product_id":"sparkfun-gator-environment-micro-bit-accessory-board","title":"SparkFun gator:environment - micro:bit Accessory Board","description":"\u003cp\u003eThe SparkFun gator:environment micro:bit Accessory Board utilizes the popular CCS811 and BME280 ICs to take care of all of your environmental readings of atmospheric quality. This sensor board can provide a variety of environmental data, including barometric pressure, humidity, temperature, equivalent TVOCs and equivalent CO2 (or eCO2) levels.\u003c\/p\u003e\n\u003cp\u003eThe gator:environment connects to the \u003ca href=\"\/en-eu\/products\/sparkfun-gator-bit\" target=\"_blank\"\u003eSparkFun gator:bit\u003c\/a\u003e via alligator-clip cables, allowing for easy access to the micro:bit's I\u003csup\u003e2\u003c\/sup\u003eC pins.\u003c\/p\u003e\n\u003cp\u003eThe CCS811 is a digital metal oxide (MOX) gas sensor that detects wide range of Volatile Organic Compounds (VOCs). With an integrated microcontroller that implements special algorithms to process the raw measurements, the CCS811 outputs the equivalent total VOC (eTVOC) and equivalent CO\u003csub\u003e2\u003c\/sub\u003e (eCO\u003csub\u003e2\u003c\/sub\u003e) values over an I\u003csup\u003e2\u003c\/sup\u003eC connection. It provides readings for the total volatile organic compounds in the parts per billion (PPB) and equivalent CO\u003csub\u003e2\u003c\/sub\u003e (or eCO\u003csub\u003e2\u003c\/sub\u003e) in the parts per million (PPM). It also has a feature that allows it to fine tune its readings if it has access to the current humidity and temperature. Luckily for us, the BME280 provides humidity, temperature, and barometric pressure! This allows the sensors to work together to give us more accurate readings than they'd be able to provide on their own.\u003c\/p\u003e\n\u003cp\u003e\u003cb\u003eNote:\u003c\/b\u003e Unfortunately, CO\u003csub\u003e2\u003c\/sub\u003e isn't a VOC and MOX type of sensors can't directly measure CO\u003csub\u003e2\u003c\/sub\u003e, despite being great at VOC detection. However, in an indoor setting, humans are a primary source of VOCs through the process of breathing. The equivalent CO\u003csub\u003e2\u003c\/sub\u003e (eCO\u003csub\u003e2\u003c\/sub\u003e) values are then estimated based on algorithms that are used to analyze the sensor data to determine the TVOC attributed by the presence of humans. This type of sensor should not be used in applications that directly require the measurement of CO\u003csub\u003e2\u003c\/sub\u003e; it is an \u003cu\u003einferred value\u003c\/u\u003e.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003egator:bit Compatible\u003c\/li\u003e\n\u003cli\u003eCCS811\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 1.8V-3.6V\u003c\/li\u003e\n\u003cli\u003eSupply Current: 30 mA (average)\u003c\/li\u003e\n\u003cli\u003eEquivalent Total VOCs (eTVOC): 0-32768 ppb\u003c\/li\u003e\n\u003cli\u003eEquivalent CO\u003csub\u003e2\u003c\/sub\u003e (eCO\u003csub\u003e2\u003c\/sub\u003e): 400-29206 ppm\u003c\/li\u003e\n\u003cli\u003eI\u003csup\u003e2\u003c\/sup\u003eC Address: 0x5B (HEX)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eBME280\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 1.71V-3.6V\u003c\/li\u003e\n\u003cli\u003eSupply Current: \u0026lt; 714 µA\u003c\/li\u003e\n\u003cli\u003eHumidity Range: 0 to 100% RH\u003c\/li\u003e\n\u003cli\u003eTemperature Range: -40°C to 85°C\u003c\/li\u003e\n\u003cli\u003ePressure Range: 300 to 1100 hPa\u003c\/li\u003e\n\u003cli\u003eI\u003csup\u003e2\u003c\/sup\u003eC Address: 0x77 (HEX)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn2.shopify.com\/s\/files\/1\/0174\/1800\/files\/gator_environment_Schematic.pdf?21015\" target=\"_blank\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/d\/f\/e\/c\/e\/gator_environment.zip\" target=\"_blank\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-gatorenvironment-hookup-guide\" target=\"_blank\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/6\/4\/c\/6\/7\/BME280_Datasheet.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e (BME280)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/2\/4\/2\/9\/6\/CCS811_Datasheet.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e (CCS811)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/5\/2\/1\/8\/4\/CCS811_Design_Guidelines.pdf\" target=\"_blank\"\u003eDesign Guide\u003c\/a\u003e (CCS811)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/d\/d\/3\/8\/b\/CCS811_Factsheet.pdf\" target=\"_blank\"\u003eFactsheet\u003c\/a\u003e (CCS811)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/pxt-gator-environment\" target=\"_blank\"\u003egator:environment PXT Package\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/gator_environment\" target=\"_blank\"\u003eGitHub Hardware Repo\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":29402005438547,"sku":"SEN-15269","price":20.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/15269-SparkFun_gator-environment_-_micro-bit_Accessory_Board-01.jpg?v=1563207870"},{"product_id":"sparkfun-gator-microphone-micro-bit-accessory-board","title":"SparkFun gator:microphone - micro:bit Accessory Board","description":"\u003cp\u003eThe SparkFun gator:microphone is a micro:bit Accessory Board that integrates an electret microphone into \u003ca href=\"\/en-eu\/products\/sparkfun-gator-bit\" target=\"_blank\"\u003eSparkFun's gator:bit\u003c\/a\u003e series of gator-clippable accessories, enabling it to be easily interfaced with the micro:bit or other microcontrollers!\u003c\/p\u003e\n\u003cp\u003eIt provides a binary indication of the presence of sound and an analog representation of its amplitude.\u003c\/p\u003e\n\u003cp\u003eThe gator:microphone consists of four pads for power and data. There is also a switch on the board to select different audio amplification levels. Additionally, it includes an LMV324 operational amplifier (op-amp) for processing the audio signals from the microphone. The specified operating voltage for the VEML6070 is between 2.7V-5.5V. For use with the gator:bit (v2) and micro:bit, you should provide 3.3V through the 3V3 and GND pads to keep the logic levels consistent.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003egator:bit Compatible\u003c\/li\u003e\n\u003cli\u003eADS1015\n\u003cul\u003e\n\u003cli\u003eOperating Voltage (V\u003csub\u003eDD\u003c\/sub\u003e): 2.0V-5.5V\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -40°C to 125°C\u003c\/li\u003e\n\u003cli\u003eOperation Modes: Single-Shot, Continuous-Conversion (Default), and Duty Cycling\u003c\/li\u003e\n\u003cli\u003eAnalog Inputs:\n\u003cul\u003e\n\u003cli\u003eMeasurement Type: Single-Ended (Default)\u003c\/li\u003e\n\u003cli\u003eInput Voltage Range: GND to V\u003csub\u003eDD\u003c\/sub\u003e\n\u003c\/li\u003e\n\u003cli\u003eFull Scale Range (FSR): ±.256V to ±6.114V (Default: 2.048V)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eResolution:\n\u003cul\u003e\n\u003cli\u003e12-bit (Differential) or 11-bit (Single-Ended)\u003c\/li\u003e\n\u003cli\u003eLSB size: 0.125mV - 3mV (Default: 1 mV)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eSample Rate: 128 Hz to 3.3 kHz (Default: 1600SPS)\u003c\/li\u003e\n\u003cli\u003eCurrent Consumption (Typical): 150μA-200μA\u003c\/li\u003e\n\u003cli\u003eI\u003csup\u003e2\u003c\/sup\u003eC Address: 0x48\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eElectret Microphone\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 1.5V (Max 10V)\u003c\/li\u003e\n\u003cli\u003eSupply Current: 0.3mA (Max)\u003c\/li\u003e\n\u003cli\u003eDirectivity: Omnidirectional\u003c\/li\u003e\n\u003cli\u003eFrequency Response: 20-16,000Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003cli\u003eLMV324 Op-amp\n\u003cul\u003e\n\u003cli\u003eOperating Voltage: 2.7V-5.5V\u003c\/li\u003e\n\u003cli\u003eSupply Current: ~300-720µA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDocuments\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/a\/8\/5\/e\/6\/gator_microphone_Schematic.pdf\" target=\"_blank\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/e\/6\/8\/6\/f\/gator_microphone.zip\" target=\"_blank\"\u003eEagle Files\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.sparkfun.com\/tutorials\/sparkfun-gatormicrophone-hookup-guide\" target=\"_blank\"\u003eHookup Guide\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/4\/6\/f\/a\/b\/Electret_Microphone.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e (Electret Microphone)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/9\/7\/a\/c\/7\/LVM324.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e (LVM324)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.sparkfun.com\/assets\/6\/5\/6\/2\/a\/ADS1015.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e (ADS1015)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/pxt-gator-microphone\" target=\"_blank\"\u003egator:microphone PXT Package\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/sparkfun\/gator_microphone\" target=\"_blank\"\u003eGitHub Hardware Repo\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sparkfun","offers":[{"title":"Default Title","offer_id":29403623718995,"sku":"SEN-15289","price":7.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/15289-SparkFun_gator-microphone_-_micro-bit_Accessory_Board-01.jpg?v=1563269019"},{"product_id":"move-mini-bumper-add-on-v2","title":":MOVE mini Bumper Add on V2","description":"\u003cp\u003eWith this Bumper add-on for \u003ca href=\"\/en-eu\/products\/move-mini-mk2-buggy-kit\" target=\"_blank\"\u003e:MOVE mini for the BBC microbit MK2\u003c\/a\u003e, everyone's favorite little programmable robot buggy just got much better. If you were looking for an add-on that allows for competitive games, then this is the add-on for you.\u003c\/p\u003e\n\u003cp\u003eThis version of the bumper add on has been designed to fit both the new :MOVE mini MK2 and the original version. The assembly instructions for both can be found in the Resources section below.\u003c\/p\u003e\n\u003cp\u003eThis self assembly Bumper add-on kit is made from the same materials as :MOVE mini MK2 and has been designed in keeping with the :MOVE mini aesthetic.\u003c\/p\u003e\n\u003cp\u003eOnce the add-on has been attached to :MOVE mini MK2, the buggy can now easily be used for competitive games involving a ball or a puck, football and hockey spring to mind.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit requires mechanical assembly.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis attachment can be fitted quickly and easily.\u003c\/li\u003e\n\u003cli\u003e:MOVE mini MK2 will be able to move balls and pucks.\u003c\/li\u003e\n\u003cli\u003eAllows for competitive team games such as football and hockey.\u003c\/li\u003e\n\u003cli\u003eThis product is backwards compatible with the first version of :MOVE mini. There are two sets of assembly instructions in the resources section below.\u003c\/li\u003e\n\u003cli\u003eCompatible with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\" data-mce-href=\"\/en-eu\/products\/new-micro-bit-v2\"\u003emicro:bit\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ev1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Set of Bumper parts.\u003c\/li\u003e\n\u003cli\u003e2 x 10mm Counter sunk M3 screw.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/products\/move-mini-mk2-buggy-kit\" target=\"_blank\"\u003e:MOVE mini for the BBC microbit kit.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003eBBC microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eScrewdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Build Instructions mk1\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5658-v2-bumper-move-mini-microbit-mk1.pdf\" target=\"_blank\"\u003eBuild Instructions For MK1 :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Build Instructions mk2\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5658-v2-bumper-move-mini-microbit-mk2.pdf\" target=\"_blank\"\u003eBuild Instructions For MK2 :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/kitronik-custom-makecode-editor-servo-blocks\/\" target=\"_blank\"\u003eGuide For Kitronik Custom MakeCode Editor Servo Blocks\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/move-mini-microbit-radio\/\" target=\"_blank\"\u003eGuide for Controlling :MOVE mini With The microbit Radio\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/adding-bluetooth-remote-control-move-mini\/\" target=\"_blank\"\u003eGuide For Adding Bluetooth Remote Control To :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/drawing-move-mini-buggy\/\" target=\"_blank\"\u003eGuide For Drawing With The :MOVE mini For The microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/automatic-headlights-for-move-mini\/\" target=\"_blank\"\u003eGuide For Coding Automatic Headlights For :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/coding-indicators-on-the-move-mini\/\" target=\"_blank\"\u003eGuide For Coding Indicators For :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"WS2812B Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/WS2812B-LED-datasheet.pdf\" target=\"_blank\"\u003eWS2812B Datasheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"servo:lite Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5623-servo-lite-datasheet.pdf\" target=\"_blank\"\u003eServo:Lite board Datasheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":29440885555283,"sku":"KIT-5658","price":1.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5658_press-bumper-add-on-move-mini-mk2-microbit.jpg?v=1565108147"},{"product_id":"line-following-add-on-for-move-mini-v2","title":"Line Following add-on for :MOVE mini V2","description":"\u003cp\u003eAdd line following functionality to the \u003ca href=\"\/en-eu\/products\/move-mini-mk2-buggy-kit\" target=\"_blank\"\u003eKitronik MOVE mini MK2\u003c\/a\u003e for the BBC micro:bit with this easy to assemble add-on kit.\u003c\/p\u003e\n\u003cp\u003eThis version of the line following add on has been designed to fit both the new :MOVE mini MK2 and the original version. The assembly instructions for both can be found in the Resources section below.\u003c\/p\u003e\n\u003cp\u003eThis add-on comes with all the parts required to add line following functionality to the :MOVE mini and does not require any soldering. Once built, the sensitivity of the left and right sensors can be individually tweaked to ensure smooth operation.\u003c\/p\u003e\n\u003cp\u003eSee the resource section below to download the line following code example. By default the code will cause the buggy to follow a dark line on a light background but the code can be altered to do the opposite.\u003c\/p\u003e\n\u003cp\u003eThere is no soldering required but the kit does require some mechanically assembly.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdd line following functionality to the :MOVE mini for the BBC micro:bit.\u003c\/li\u003e\n\u003cli\u003eCan either follow a dark line on a light back ground or a light line on a dark background.\u003c\/li\u003e\n\u003cli\u003eThe line following sensitivity can be adjusted with a screwdriver.\u003c\/li\u003e\n\u003cli\u003eNo Soldering required.\u003c\/li\u003e\n\u003cli\u003eExample line following code is provided.\u003c\/li\u003e\n\u003cli\u003eThis product is backwards compatible with the first version of :MOVE mini. There are two sets of assembly instructions in the resources section below.\u003c\/li\u003e\n\u003cli\u003eCompatible with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\" data-mce-href=\"\/en-eu\/products\/new-micro-bit-v2\"\u003emicro:bit\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ev1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x :MOVE Sensor Interface for the BBC micro:bit.\u003c\/li\u003e\n\u003cli\u003e1 x :MOVE Line Following board for the BBC micro:bit.\u003c\/li\u003e\n\u003cli\u003e1 x Connector Cable.\u003c\/li\u003e\n\u003cli\u003e2 x CS M3 8mm Screws.\u003c\/li\u003e\n\u003cli\u003e2 x M3 Hex Full Width Nut.\u003c\/li\u003e\n\u003cli\u003e5 x CS M3 12mm Screws.\u003c\/li\u003e\n\u003cli\u003e2 x 6mm Spacers.\u003c\/li\u003e\n\u003cli\u003e2 x 12mm CS Screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/products\/move-mini-mk2-buggy-kit\" target=\"_blank\"\u003e:MOVE mini buggy kit.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003eBBC micro:bit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x Micro USB Cable.\u003c\/li\u003e\n\u003cli\u003e1 x Small flat bladed screwdriver.\u003c\/li\u003e\n\u003cli\u003e1 x Small phillips screwdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Line Follower Assembly Instructions MK1\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5659-line-following-assembly-instructions-mk1.pdf\" target=\"_blank\"\u003eLine Follower Assembly Instructions - MK1\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Line Follower Assembly Instructions MK2\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5659-line-following-assembly-instructions-mk2.pdf\" target=\"_blank\"\u003eLine Follower Assembly Instructions - MK2\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/microbit-Line-Follower.zip\" target=\"_blank\"\u003eLine Following Code HEX file\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Sensor Interface Assembly Instructions\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5628-move-sensor-interface-board-microbit-assembly-instructions.pdf\" target=\"_blank\"\u003eSensor Interface board Assembly Instructions\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Line Follower Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5629-move-line-following-board-microbit-datasheet.pdf\" target=\"_blank\"\u003eLine Follower Datasheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":29440895549523,"sku":"KIT-5659","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5659_additional-line-following-add-on-move-mini-microbit-action.jpg?v=1565108430"},{"product_id":"move-mini-mk2-buggy-kit","title":":MOVE mini MK2 buggy kit","description":"\u003cp\u003eThe Kitronik :MOVE mini MK 2 buggy robot kit for the BBC micro:bit is the latest version of the ever popular :MOVE mini that provides a fun introduction to robotics.\u003c\/p\u003e\n\u003cp\u003eThe :MOVE mini is a 2 wheeled robot that is suitable for autonomous operation, remote control projects via a Bluetooth application or being controlled using a second BBC \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicrobit\u003c\/a\u003e as a controller via the microbits radio functionality.\u003c\/p\u003e\n\u003cp\u003eThe MK2 features a brand new set of Kitronik injection moulded wheels with 0-ring rubber tyres. The wheels maintain the large size, relative to the chassis, and add improved traction for better performance than the original buggies laser cut wheels. MK2 goes where V1.0 could not!\u003c\/p\u003e\n\u003cp\u003eThe Kitronik :MOVE mini is powered by two continuous rotation servo motors. The speed of these servos can be controlled by simply altering the PWM (Pulse Width Modulation) signal to the servo, which is easy to do using the Servo blocks in the Microsoft PXT Block editor. Kitronik have also produced custom blocks for the Servo:Lite to make the task of coding as quick and painless as possible, see the resources section at the foot of this page for more information.\u003c\/p\u003e\n\u003cp\u003eThe buggy also has 5 x RGB individually addressable ZIP LEDs (NeoPixel compatible), which can be used as indicators, reverse lights etc...\u003c\/p\u003e\n\u003cp\u003eIt is possible to add a pen or other extra parts to the kit to increase the range of tasks for which it can be used. \u003cstrong\u003eThe BBC micro:bit is sold separately and the kit requires simple assembly, \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003ebuy the microbit here\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe included Kitronik :MOVE servo:lite board can also be used in conjunction with a BBC micro:bit to build other movement based projects. Kitronik have produced a wide range of tutorials and guides that can be found in the resources section below.\u003c\/p\u003e\n\u003ch2\u003eNote:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eIt requires mechanical assembly.\u003c\/li\u003e\n\u003cli\u003eThis kit does not come with a microbit, you can \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003ebuy the microbit here\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThe kit offers a fun introduction to the world of DIY robotics.\u003c\/li\u003e\n\u003cli\u003eAdd code for autonomous operation.\u003c\/li\u003e\n\u003cli\u003eUse in conjunction with the free \u003ca href=\"https:\/\/play.google.com\/store\/apps\/details?id=com.kitronik.blemove\u0026amp;hl=en_GB\" target=\"_blank\"\u003emicro:bit Android App\u003c\/a\u003e and control it over Bluetooth.\u003c\/li\u003e\n\u003cli\u003eUse the radio function and a second microbit as a controller.\u003c\/li\u003e\n\u003cli\u003eAttach a pen and code the robot to draw shapes.\u003c\/li\u003e\n\u003cli\u003eThe buggy features new and improved injection moulded wheels with rubber 0-ring tyres.\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Set of chassis parts.\u003c\/li\u003e\n\u003cli\u003e2 x Micro 360 degree continuous rotation Servos with accessories.\u003c\/li\u003e\n\u003cli\u003e1 x Servo:Lite board.\u003c\/li\u003e\n\u003cli\u003e2 x Counter sunk M3 6mm screw.\u003c\/li\u003e\n\u003cli\u003e5 x Counter sunk M3 8mm screw.\u003c\/li\u003e\n\u003cli\u003e6 x M2 Rec Pan Steel screw.\u003c\/li\u003e\n\u003cli\u003e6 x M2 Hex Full Width Nut.\u003c\/li\u003e\n\u003cli\u003e3 x AAA Batteries.\u003c\/li\u003e\n\u003cli\u003e1 x Pair of ABS White Wheels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 95mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 85mm.\u003c\/li\u003e\n\u003cli\u003eHeight: 85mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5652-web-move-mini-mk-2-microbit-build-instructions.pdf\" target=\"_blank\"\u003eBuild Instructions\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"servo:lite Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5623-servo-lite-datasheet.pdf\" target=\"_blank\"\u003eServo:Lite board Datasheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"WS2812B Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/WS2812B-LED-datasheet.pdf\" target=\"_blank\"\u003eWS2812B Datasheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eCoding and usage guides:\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/kitronik-custom-pxt-editor-servo-blocks\/\" target=\"_blank\"\u003eGuide For Kitronik Custom PXT Editor Servo Blocks\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/getting-started-servolite-board-microbit\/\" target=\"_blank\"\u003eGetting Started With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\" target=\"_blank\"\u003eGuide For Controlling 3 Servos With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/using-kitronik-zip-leds-bbc-microbit\/\" target=\"_blank\"\u003eGuide For Using Kitronik ZIP LEDs With The BBC microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/move-mini-microbit-radio\/\" target=\"_blank\"\u003eGuide for Controlling :MOVE mini With The microbit Radio\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/adding-bluetooth-remote-control-move-mini\/\" target=\"_blank\"\u003eGuide For Adding Bluetooth Remote Control To :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/drawing-move-mini-buggy\/\" target=\"_blank\"\u003eGuide For Drawing With The :MOVE mini For The microbit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/automatic-headlights-for-move-mini\/\" target=\"_blank\"\u003eGuide For Coding Automatic Headlights For :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/coding-indicators-on-the-move-mini\/\" target=\"_blank\"\u003eGuide For Coding Indicators For :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":29440904265811,"sku":"KIT-5652","price":27.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5652_press-move-mini-mk-2-microbit-built.jpg?v=1565108148"},{"product_id":"tipper-trailer-add-on-for-move-mini-mk2","title":"Tipper Trailer Add On For MOVE:mini Mk2","description":"\u003cp\u003eWith this, the latest version of the Tipper Truck add-on for \u003ca href=\"\/en-eu\/products\/move-mini-mk2-buggy-kit\" target=\"_blank\"\u003e:MOVE mini MK2 for the BBC microbit\u003c\/a\u003e, everyone's favourite little programmable robot buggy just got much better. Robots often do more than just :MOVE from A to B, and with this add-on so can :MOVE mini.\u003c\/p\u003e\n\u003cp\u003eAlthough this add on has been designed to work with :MOVE mini MK2 it can also be fitted to the original :MOVE mini. Kitronik have produced two sets of build instructions as there is a slightly different procedure for each. The MK1 and MK2 build instructions can both be found in the resources section below.\u003c\/p\u003e\n\u003cp\u003ePreviously on :MOVE mini, we; drew shapes, controlled it via bluetooth, controlled it with a second \u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\"\u003emicrobit\u003c\/a\u003e, and we also coded a variety of light shows. Now, it can totally carry and dump stuff too!\u003c\/p\u003e\n\u003cp\u003eThis self assembly Tipper Truck add-on kit is made from the same materials as :MOVE mini, designed in keeping with the :MOVE mini aesthetic, and also comes with the servo required to move the Tipper Truck trailer up and down.\u003c\/p\u003e\n\u003cp\u003eThere is a very simple \u003ca href=\"\/en-eu\/products\/servo-lite-board-for-micro-bit\" target=\"_blank\"\u003eServo:Lite\u003c\/a\u003e board hack that enables the control of the third servo, you can \u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\" target=\"_blank\"\u003efind out how here\u003c\/a\u003e. Once the kit is fully assembled, the Tipper Truck can be coded with the Microsoft \u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/getting-started-microsoft-makecode-editor\/\" target=\"_blank\"\u003eMakeCode Editor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote: In order to use this accessory you must enable the third servo functionality to be able to connect the third servo to the Servo:Lite board, some soldering is required in order to do this. The header pins required for this are supplied with this kit. Also, enabling the third servo disables the onboard ZIP LEDs. If you undo the third servo hack and return the board to its original state, the onboard ZIP LEDs will be re-enabled. Kitronik have produced a short guide showing how to enable the third servo and how to revert this change, \u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\" target=\"_blank\"\u003eread it here\u003c\/a\u003e.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eThis kit requires mechanical assembly.\u003c\/li\u003e\n\u003cli\u003eThis kit requires some soldering.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWhen attached to :MOVE mini MK2 this kit offers a fun introduction to the world of DIY robotics.\u003c\/li\u003e\n\u003cli\u003eCode it with the Microsoft \u003ca href=\"https:\/\/makecode.microbit.org\/\"\u003eMake\u003c\/a\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/\" target=\"_blank\"\u003eC\u003c\/a\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/\"\u003eode Editor\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eUse in conjunction with an App and control it over Bluetooth.\u003c\/li\u003e\n\u003cli\u003eUse the radio function and a second microbit as a controller.\u003c\/li\u003e\n\u003cli\u003eCompatible with \u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Set of Tipper Truck parts.\u003c\/li\u003e\n\u003cli\u003e1 x Mini 180 Degree Servo.\u003c\/li\u003e\n\u003cli\u003e8 x M2 6mm Pan head steel screw.\u003c\/li\u003e\n\u003cli\u003e5 x M2 16mm Pan head steel screw.\u003c\/li\u003e\n\u003cli\u003e8 x M2 Hex Full width nut.\u003c\/li\u003e\n\u003cli\u003e2 x 6mm Counter sunk M3 screw.\u003c\/li\u003e\n\u003cli\u003e2 x 10mm Counter sunk M3 screw.\u003c\/li\u003e\n\u003cli\u003e2 x M3 Washers.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 100mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 65mm.\u003c\/li\u003e\n\u003cli\u003eHeight: 61mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/products\/move-mini-mk2-buggy-kit\" target=\"_blank\"\u003e:MOVE mini MK2 (or MK1)for the BBC microbit kit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\"\u003eBBC microbit\u003c\/a\u003e (v1 or v2).\u003c\/li\u003e\n\u003cli\u003eScrewdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/tipper-truck-add-on-move-mini-instructions-mk1.pdf\" title=\"tipper trailer build instructions mk1\"\u003eTipper Build Instructions for MK1 :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5670-tipper-truck-add-on-move-mini-instructions-mk2.pdf\" title=\"tipper trailer build instructions mk2\"\u003eTipper Build Instructions for MK2 :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5623-servo-lite-datasheet.pdf\" title=\"servo:lite Datasheet\"\u003eServo:Lite board Datasheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eCoding Examples;\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/microbit-tipper-and-bulldozer-example-code-using-microbit-radio.zip\"\u003eExample code and usage instructions\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/kitronik-custom-makecode-editor-servo-blocks\/\" target=\"_blank\"\u003eGuide For Kitronik Custom MakeCode Editor Servo Blocks\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/getting-started-servolite-board-microbit\/\"\u003eGetting Started With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003eGuide For Controlling \u003c\/a\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/3-servos-with-the-servolite-board\/\"\u003e3 Servos With The Servo:Lite board\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/move-mini-microbit-radio\/\"\u003eGuide for Controlling \u003c\/a\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/move-mini-microbit-radio\/\" target=\"_blank\"\u003e:MOVE mini With The microbit Radio\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/blog\/adding-bluetooth-remote-control-move-mini\/\"\u003eGuide For Adding Bluetooth Remote Control To :MOVE mini\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":29492376698963,"sku":"KIT-5670","price":11.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5670_additional-2-tipper-trailer-add-on-move-mini-robot-buggy-microbit.jpg?v=1567434444"},{"product_id":"view-text32-lcd-screen-for-the-bbc-micro-bit","title":":VIEW text32 LCD Screen for the BBC micro bit","description":"\u003cp\u003eThe Kitronik :VIEW Text32 character LCD, for those times when the LED Matrix and\/or external LEDs aren't delivering adequate visual feedback from your \u003ca href=\"https:\/\/www.kitronik.co.uk\/microbit.html\"\u003emic\u003c\/a\u003e\u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003er\u003c\/a\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/microbit.html\"\u003eobit\u003c\/a\u003e project. The :VIEW Text32 is a character LCD showing 32 characters (2 lines of 16 characters). The :VIEW Text32 also breaks out the BBC micro:bit pins to edge pads (excluding pin14).\u003c\/p\u003e\n\u003cp\u003eThe bottom edge of the board has a replication of the BBC microbits own edge connector, this allows you to plug the :VIEW Text32 into any board that the microbit itself can be slotted into. This is great news if your project outputs strings of text and numbers that previously would have slowly scrolled across the LED Matrix.\u003c\/p\u003e\n\u003cp\u003eThe board has been designed so that the BBC micro:bit can be slotted into the edge connector on the top side of the PCB. No extra tools are required for installation, the board is supplied and ready to go --plug and play\/work!\u003c\/p\u003e\n\u003cp\u003eOn the back of the :VIEW Text32 is a 3 x AAA battery holder to provide power to the :VIEW Text32, the attached micro:bit, and the replicated edge connector. There is a power switch for turning the battery supply on and off. The replicated edge connector can supply 90mA (as per the normal micro:bit)\u003c\/p\u003e\n\u003cp\u003eKitronik has produced a set of custom blocks for the Microsoft MakeCode editor. To add them click on the cog icon in the top right of the editor, then; select Extensions from the drop down menu, type and enter Kitronik into the search bar and select the :VIEW Text32 tile from the list. The custom blocks will now be added to the editor and can be used in your code.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe :VIEW Text32 is a character LCD showing 32 characters (2 lines of 16 characters).\u003c\/li\u003e\n\u003cli\u003eA BBC micro:bit can be slotted into the edge connector on the top side of the PCB.\u003c\/li\u003e\n\u003cli\u003eThe board features a replicated microbit edge connector allowing it to be plugged into any board that a microbit can be slotted into.\u003c\/li\u003e\n\u003cli\u003eIt features an on board battery holder that powers the display, the microbit and the replicated edge connector.\u003c\/li\u003e\n\u003cli\u003eThe :VIEW Text32 can be coded with the \u003ca href=\"https:\/\/makecode.microbit.org\/\"\u003eMa\u003c\/a\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/\" target=\"_blank\"\u003eke\u003c\/a\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/\"\u003ecode\u003c\/a\u003e editor or with \u003ca href=\"https:\/\/python.microbit.org\/\"\u003eM\u003c\/a\u003e\u003ca href=\"https:\/\/python.microbit.org\/\" target=\"_blank\"\u003ei\u003c\/a\u003e\u003ca href=\"https:\/\/python.microbit.org\/\"\u003ecroPython\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eKitronik has created custom code blocks for the MakeCode editor to make using the :VIEW Text32 as simple as possible.\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x :VIEW Text32 for BBC micro:bit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 84mm.\u003c\/li\u003e\n\u003cli\u003eHeight: 63mm.\u003c\/li\u003e\n\u003cli\u003eThickness: 28.6.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003eBBC micro:bit\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5650-view-text32-lcd-screen-microbit-datasheet.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":29492383121491,"sku":"KIT-5650","price":16.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5650_press-view-text-32-microbit-lcd-screen-front.jpg?v=1567433859"},{"product_id":"micro-bit-breadboard-breakout-board","title":"micro:bit breadboard breakout board","description":"\u003cp\u003eThe breadboard breakout allows the user to plug a BBC \u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\" rel=\"noopener noreferrer\"\u003emicrobit\u003c\/a\u003e into a standard 2.54mm pitch breadboard. Two 11 way pin headers are used to make connections into the breadboard.\u003c\/p\u003e\n\u003cp\u003eThe micro:bit slots into the edge connector on the top side of the PCB. No extra tools are required for installation. The front of the BBC micro:bit (the side with the LEDs) should be inserted facing the same side as the 3V pin.\u003c\/p\u003e\n\u003cp\u003eThe edge connector has connections on only one side, so if the BBC micro:bit is inserted in reverse orientation, it will not work.\u003c\/p\u003e\n\u003cp\u003eThe PCB is designed to plug across the middle slot of a breadboard, the same placement as an IC component.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThis breakout board plugs straight accross the middle slot of a standard 2.54mm pitch breadboard, just like an IC component.\u003c\/li\u003e\n\u003cli\u003eThe microbit slots into the onboard edge connector.\u003c\/li\u003e\n\u003cli\u003eThe microbits pins are broken out to 2 x 11 way header pins.\u003c\/li\u003e\n\u003cli\u003eUse jumper wires to connect from the header pins to the breadboard.\u003c\/li\u003e\n\u003cli\u003eNo tools or soldering required for installation.\u003c\/li\u003e\n\u003cli\u003emicrobit to breadboard prototyping made easy.\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Breadboard breakout for the BBC micro:bit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLength: 58.4mm.\u003c\/li\u003e\n\u003cli\u003eWidth: 12.8mm.\u003c\/li\u003e\n\u003cli\u003eHeight: 20.76.\u003c\/li\u003e\n\u003cli\u003ePin Pitch: 2.54mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5664-microbit-breadboard-brealout-board-datasheet.pdf\"\u003eDat\u003c\/a\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5664-microbit-breadboard-brealout-board-datasheet.pdf\" target=\"_blank\"\u003eas\u003c\/a\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5664-microbit-breadboard-brealout-board-datasheet.pdf\"\u003eheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":29492384268371,"sku":"KIT-5664","price":4.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5664_additional-3-kitronik-breadboard-breakout-microbit.jpg?v=1567434201"},{"product_id":"bit-bot-xl-robot-for-micro-bit","title":"Bit:Bot XL Robot for micro:bit","description":"\u003cp\u003eIntroducing BitBot XL, taking the much-loved BitBot to the next level. 4tronix have made several changes, some subtle, some not so subtle, to give a much-improved experience of using and working with the BitBit.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNB. BBC Micro:Bit is NOT included. Please purchase \u003ca href=\"\/en-eu\/products\/microbit\" title=\"Purchase BBC micro:bit\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eHERE \u003c\/a\u003eif required\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eThe Microsoft Makecode Extension for Bit:Bot also works for BitBot XL. Go to the Advanced tab or the Tools gear icon and select Extensions, then search for BitBot. It can automatically detect while running which version you have, or you can force it to be the Classic BitBot or the new XL.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eProduct Dimensions approx 10% larger in length and width\u003c\/li\u003e\n\u003cli\u003eChunky wheels\u003c\/li\u003e\n\u003cli\u003eReady - assembled. Battery pack permanently attached\u003c\/li\u003e\n\u003cli\u003eMotor gearboxes fully covered - minimises fluff in the gears\u003c\/li\u003e\n\u003cli\u003eMicrobit mounted vertically\u003c\/li\u003e\n\u003cli\u003eUses standard breakout connector for \u003ca href=\"\/en-eu\/products\/ultrasonic-distance-sensor-breakout\" target=\"_blank\" title=\"Ultrasonic Breakout\" rel=\"noopener noreferrer\"\u003eultrasonic breakout\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eLine sensors no longer share pins with the Microbit buttons - removes all Bluetooth pairing issues and allows use of buttons in your code\u003c\/li\u003e\n\u003cli\u003ePen holder is fitted as standard. Mounted directly over the pivot point for better drawing\u003c\/li\u003e\n\u003cli\u003eIndicator LEDs added for line follower sensors\u003c\/li\u003e\n\u003cli\u003e2 GVS outputs provided for potential servo usage with 5V power\u003c\/li\u003e\n\u003cli\u003eMakecode extension has been changed so code is compatible with both Classic and XL versions\u003c\/li\u003e\n\u003cli\u003eBuzzer now connected on Pin 0 so you can play music through it\u003c\/li\u003e\n\u003c\/ul\u003e\nAnd it still retains all these features from the classic BitBot:\n\u003cul\u003e\n\u003cli\u003e2 micro-metal gear motors. Both fully controllable in software, for both speed (0 to 100%) and direction (forward or reverse)\u003c\/li\u003e\n\u003cli\u003eWheels with rubber tyres for maximum grip\u003c\/li\u003e\n\u003cli\u003eFront ball caster\u003c\/li\u003e\n\u003cli\u003e12 Smart RGB LEDs in 2 sets of 6 along the arms either side. Select any colour for any pixel, produce stunning lighting effects as your Bit:Bot XL moves around\u003c\/li\u003e\n\u003cli\u003e2 digital line following sensors. Code your own line-following robots and race them to see whose code produces the fastest lap time!\u003c\/li\u003e\n\u003cli\u003e2 analog light sensors (front left and front right) so your Bit:Bot XL can be programmed to follow a light source such as a torch, or you could code it to go and hide in the darkest place it can find\u003c\/li\u003e\n\u003cli\u003eBuzzer, so you can make beeping sounds or music whenever you want\u003c\/li\u003e\n\u003cli\u003ePowered from integrated 3xAA battery holder with on\/off switch and blue indicator LED\u003c\/li\u003e\n\u003cli\u003eEasily plug your BBC micro:bit in and out using the vertical edge connector\u003c\/li\u003e\n\u003cli\u003eExpansion connections at the front for accessories\u003c\/li\u003e\n\u003cli\u003eTwo GVS connectors with 5V for servos (shared with light sensors)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eOptionally, you can add an \u003ca href=\"\/en-eu\/products\/ultrasonic-distance-sensor-breakout\" target=\"_blank\" title=\"Ultrasonic Breakout\" rel=\"noopener noreferrer\"\u003eUltrasonic Distance Sensor \u003c\/a\u003e(rangefinder) module, or a Talon grabber (coming soon).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e* Microbit, Pen and Ultrasonic not included\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eSee this \u003ca href=\"http:\/\/4tronix.co.uk\/blog\/?p=1490\" target=\"_blank\" rel=\"noopener noreferrer\"\u003edetailed blog entry \u003c\/a\u003efor example code snippets and application ideas\u003c\/p\u003e\n\u003cp\u003eLearn \u003ca href=\"https:\/\/ukbaz.github.io\/howto\/bitbotRemoteControl.html\" target=\"_blank\" rel=\"noopener noreferrer\"\u003ehere how to control \u003c\/a\u003ethe Bit:Bot with your Bluetooth phone\u003c\/p\u003e","brand":"4tronix","offers":[{"title":"Default Title","offer_id":31100344467539,"sku":"4TR-BBOTXL","price":36.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/IMG_3352-1.jpg?v=1572884399"},{"product_id":"noise-pack-for-kitronik-inventors-kit-for-the-bbc-micro-bit","title":"Noise Pack for Kitronik Inventor's Kit for the BBC micro:bit","description":"\u003cp\u003eLearn how to bend sound to your will with the Noise Pack add-on for the Kitronik Inventors Kit for the BBC micro:bit.\u003c\/p\u003e\n\u003cp\u003eThe pack, in conjunction with the Inventors kit and a \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e, contains all you need to build the 5 exciting experiments contained within.\u003c\/p\u003e\n\u003cp\u003eYou will learn how to build and code musical instruments, amplifiers, and EQs, including High and Low Pass Filters (HPF\/LPF). Who needs expensive Pultecs or Console Channel Strips when you've got some components, a microbit, and some know how!\u003c\/p\u003e\n\u003cp\u003eThe pack brings together electronics and code in the most noblest of causes, making noise! We're going to make a noise and then we're going to amplify it!\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eA fun and exciting add-on pack for the Kitronik Inventors Kit for the micro:bit.\u003c\/li\u003e\n\u003cli\u003eLearn how to manipulate sound, build instruments, amplify your sounds, and how to shape your sounds with Filtering and EQ.\u003c\/li\u003e\n\u003cli\u003eLearn how to build and code the following 5 experiments;\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eVarying The Tone With A Piezo Buzzer.\u003c\/li\u003e\n\u003cli\u003eBuilding A Mono Amplifier.\u003c\/li\u003e\n\u003cli\u003eTouch Control.\u003c\/li\u003e\n\u003cli\u003eThe Digital Trumpet.\u003c\/li\u003e\n\u003cli\u003eEqualise Your Sound.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContains:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x 100kΩ Resistor.\u003c\/li\u003e\n\u003cli\u003e2 x 3.3kΩ Resistor.\u003c\/li\u003e\n\u003cli\u003e1 x 15kΩ Resistor.\u003c\/li\u003e\n\u003cli\u003e3 x 100nF Ceramic Disk Capacitor.\u003c\/li\u003e\n\u003cli\u003e2 x 1µF Electrolytic Capacitor.\u003c\/li\u003e\n\u003cli\u003e2 x Potentiometer.\u003c\/li\u003e\n\u003cli\u003e2 x Finger Adjust Spindle.\u003c\/li\u003e\n\u003cli\u003e2 x Solid Core Connecting Wire.\u003c\/li\u003e\n\u003cli\u003e10 x M\/M Jumper Wires.\u003c\/li\u003e\n\u003cli\u003e1 x 0.15W 8Ω Speaker.\u003c\/li\u003e\n\u003cli\u003e4 x F\/F Jumper Wires.\u003c\/li\u003e\n\u003cli\u003e1 x NCP2890 Audio Amplifier IC Breakout Board.\u003c\/li\u003e\n\u003cli\u003e1 x 3 Key Touch PCB.\u003c\/li\u003e\n\u003cli\u003e1 x Tutorial Booklet, containing 5 experiments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e (v1 or v2)\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/inventors-kit-for-the-bbc-micro-bit\" target=\"_blank\"\u003eInventors Kit for the micro:bit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/usb-a-to-microb-cable-black\" target=\"_blank\"\u003eMicro USB Cable\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"microbit guitar resource link\" href=\"https:\/\/www.kitronik.co.uk\/blog\/microbit-guitar-noise-pack-inventors-kit\/\" target=\"_blank\"\u003eNoise Pack add-on microbit Guitar Free resource.\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":31261862723667,"sku":"KIT-5603-NOISE","price":12.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5603-noise_press-noise-pack-inventors-kit-microbit-parts.jpg?v=1575561849"},{"product_id":"digital-logic-pack-for-kitronik-inventors-kit-for-the-micro-bit","title":"Digital Logic Pack for Kitronik Inventor's Kit for the micro:bit","description":"\u003cp\u003eLearn to think logically with the Digital Logic Add-On for the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/inventors-kit-for-the-bbc-micro-bit\" target=\"_blank\"\u003eInventor's kit for micro:bit\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003eThis kit, along with the Inventor's kit, serves as an introduction to logic gates and how they can be used in conjunction with the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e. The seven included experiments also cover the Basic Digital Logic curriculum at KS3 (UK Design \u0026amp; Technology curriculum).\u003c\/p\u003e\n\u003cp\u003eLogic gates are the basic building blocks of digital\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/en.wikipedia.org\/wiki\/Integrated_circuit\" target=\"_blank\"\u003eintegrated circuits\u003c\/a\u003e, the chips found in the majority of electronic products today. Although these experiments explore how individual logic gates work, in chips there could be millions of individual logic gates, depending on the size and complexity of the chip. For example, there are approximately 1.4 billion transistors in a quad core i7. If we assume that the average gate requires three transistors then that would give approx. 450 million gates.\u003c\/p\u003e\n\u003cp\u003eIncluded in this kit are 5 IC's, each a different type of logic gate. They are; AND, OR, XOR, NAND, and a NOT Gate. There are also colour coded stickers included, and these colours are used throughout the booklet in the circuit diagrams. The kit also contains 2 x 2N7000 FETs and a pack of 10 male to male jumper wires. Each experiment also makes use of components from the Inventor's kit for micro:bit, often LEDs as they offer a visual and immediate indication of the 'state' of gate inputs and outputs.\u003c\/p\u003e\n\u003cp\u003eThe code has been created in the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/\" target=\"_blank\"\u003eMicrosoft MakeCode Editor\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand the code for each of the experiments can be downloaded from the resources section below. Kitronik have also produced Python code examples for each of the experiments, these are also available as a download from the resources section.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOffers an easy to understand introduction to Digital Logic gates and combining these gates with the micro:bit.\u003c\/li\u003e\n\u003cli\u003eThis kit can be used as a teaching aid for Basic Digital Logic curriculum at KS3.\u003c\/li\u003e\n\u003cli\u003eA fun and hands on introduction to the building blocks of ICs.\u003c\/li\u003e\n\u003cli\u003eCode can be created with the Microsoft\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/makecode.microbit.org\/\" target=\"_blank\"\u003eMakeCode editor\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand also in the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/python.microbit.org\/\" target=\"_blank\"\u003ePython editor\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eThe code examples have also been provided as a download from the resources section below. Choose from either blocks or Python.\u003c\/li\u003e\n\u003cli\u003eThe topics covered include; Truth Tables, Semiconductors and state electricity, and how to use gates in conjunction with the micro:bit via code.\u003c\/li\u003e\n\u003cli\u003eLearn how to build and code the 7 following experiments;\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eEXP.1 - Introduction to NOT Gates.\u003c\/li\u003e\n\u003cli\u003eEXP.2 - Introduction to AND Gates.\u003c\/li\u003e\n\u003cli\u003eEXP.3 - Introduction to OR Gates.\u003c\/li\u003e\n\u003cli\u003eEXP.4 - Introduction to NAND Gates.\u003c\/li\u003e\n\u003cli\u003eEXP.5 - Introduction to XOR Gates.\u003c\/li\u003e\n\u003cli\u003eEXP.6 - Half Adder Circuit.\u003c\/li\u003e\n\u003cli\u003eEXP.7 - Full Adder Circuit With Binary To Decimal Converter.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x Quad 2 input AND IC.\u003c\/li\u003e\n\u003cli\u003e1 x Quad 2 input OR IC.\u003c\/li\u003e\n\u003cli\u003e1 x Hex NOT IC.\u003c\/li\u003e\n\u003cli\u003e1 x Quad 2 input NAND IC.\u003c\/li\u003e\n\u003cli\u003e1 x Quad 2 input XOR IC.\u003c\/li\u003e\n\u003cli\u003e2 x 2N7000 FET.\u003c\/li\u003e\n\u003cli\u003e10 x\u003cspan\u003e \u003c\/span\u003eM-M Jumper Wires.\u003c\/li\u003e\n\u003cli\u003e1 x Set of 5 colour coded IC Stickers.\u003c\/li\u003e\n\u003cli\u003eTutorial booklet, containing 7 experiments.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/inventors-kit-for-the-bbc-micro-bit\" target=\"_blank\"\u003eKitronik Inventors Kit for the micro:bit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicro:bit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/usb-a-to-microb-cable-black\" target=\"_blank\"\u003eMicro USB cable\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eMicrosoft\u003ca href=\"https:\/\/makecode.microbit.org\/\" target=\"_blank\"\u003e\u003cspan\u003e \u003c\/span\u003eMakeCode Editor\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003emicro:bit\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/python.microbit.org\/\" target=\"_blank\"\u003ePython editor\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eMakeCode\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/5653-microbit-digital-logic-kit-experimetns-1-7-makecode.zip\" target=\"_blank\"\u003ecode examples download\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003ePython\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/5653-microbit-digital-logic-kit-experimetns-1-7-python.zip\" target=\"_blank\"\u003ecode examples download\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDownload Notes:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eMakeCode\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- The files have been zipped and will need to be extracted. Once extracted, the files can either be individually loaded directly onto a connected micro:bit or individually dragged and dropped into the MakeCode editor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePython\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- The files have been zipped and will need to be extracted. Once extracted, the files can be individually dragged and dropped into the Python editor. Once in the editor, the file can be downloaded as a hex file that can be dropped directly onto a connected micro:bit.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":31261922295891,"sku":"KIT-5653","price":8.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5653_press-digital-logic-pack-inventors-kit-microbit-contents.jpg?v=1575562957"},{"product_id":"kitronik-zip-halo-hd-for-micro-bit","title":"Kitronik ZIP Halo HD for micro:bit","description":"\u003cp\u003eThe Kitronik Halo HD board for the micro:bit incorporates 60 individually addressable full colour ZIP LEDs, a MEMS mic, piezo buzzer, RTC and onboard battery holder!\u003c\/p\u003e\n\u003cp\u003eIt also breaks out P1 and P2 to a standard 0.1” footprint, it features a MEMS microphone for detection of sound, and a piezo buzzer to play sound. If that weren't enough, it also features an onboard real time clock (RTC) controlled by I2C lines from the microbit. The board also has two M3 mounting holes. We think you'll agree, the board is loaded with useful features. It doesn't stop there...\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePlug n Play: \u003c\/strong\u003eNo tools required, not even a screwdriver, plug the micro:bit straight into the onboard edge connector and you are good to go!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOnboard Power: \u003c\/strong\u003eThe board has a 3xAA battery holder mounted on the rear, with a power switch on the front of the board. A regulated supply is produced on the board which is fed into the 3V and GND connections to power the connected BBC micro:bit, removing the need to power the BBC micro:bit separately. See the \u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5672-zip-halo-hd-leds-microbit.datasheet.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e for more information.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMakeCode Blocks: \u003c\/strong\u003eKitronik have created custom blocks for the Halo HD for use with MakeCode. To add these blocks, first go to \u003ca\u003emakecode.microbit.org\u003c\/a\u003e and start a new project. Under the “Advanced” section click on “Extensions”. In the next window search for “Halo HD”. Then, click on the tile to import it into MakeCode. You will see that the blocks are split across three categories; ZIP LEDs, Microphone and Clock. You can find more information on the MakeCode editor and also on how to write code for it with MicroPython in the \u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5672-zip-halo-hd-leds-microbit.datasheet.pdf\"\u003eDatasheet\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExamples: \u003c\/strong\u003eTo get you off to a flying start Kitronik have produced a number of code examples that cover all of the onboard features and that will also serve to inspire your own projects. You will find links to these examples in the resources section below.\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eFeatures:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe board features 60 individually addressable full colour ZIP LEDs.\u003c\/li\u003e\n\u003cli\u003eIt breaks out P1 and P2 to a standard 0.1” footprint.\u003c\/li\u003e\n\u003cli\u003eIt's wired for sound with a MEMS microphone and a piezo buzzer.\u003c\/li\u003e\n\u003cli\u003eIt has an onboard Real time clock (RTC) controlled by I2C lines.\u003c\/li\u003e\n\u003cli\u003ePlug n play with the onboard edge connector, no tools required!.\u003c\/li\u003e\n\u003cli\u003eThe board has a 3xAA battery holder mounted on the rear.\u003c\/li\u003e\n\u003cli\u003eThe On\/off switch helps you maximise battery life.\u003c\/li\u003e\n\u003cli\u003eIt can be coded with MakeCode blocks via custom blocks or with MicroPython.\u003c\/li\u003e\n\u003cli\u003e2 x M3 Mounting holes, for secure projects.\u003c\/li\u003e\n\u003cli\u003eCompatible with micro:bit v1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eContents:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x :VIEW ZIP Halo HD Board for micro:bit.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eDimensions:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eDiameter: 87mm.\u003c\/li\u003e\n\u003cli\u003eM3 Mounting Holes Spacing (Center to Center): 68.4mm.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eRequires:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003emicrobit\u003c\/a\u003e (v1 or v2).\u003c\/li\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/?q=cab02\" target=\"_blank\"\u003eUSB Type-A to Micro-B USB Noodle Cable\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cstrong\u003eResources:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/pdf\/5672-zip-halo-hd-leds-microbit.datasheet.pdf\" target=\"_blank\"\u003eDatasheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003eKitronik have produced example code below to get you off to a flying start. Collectively, they serve as an introduction to all of the features of the board.\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/5672-halo-hd-leds-microbit-example-code-clock.zip\" target=\"_blank\"\u003eCode Clock\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/5672-halo-hd-leds-microbit-example-code-clap-game.zip\" target=\"_blank\"\u003eClap Game Code\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/5672-halo-hd-leds-microbit-example-code-wake-up-light.zip\" target=\"_blank\"\u003eWake Up Light Code\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/5672-halo-hd-leds-microbit-example-code-timer.zip\" target=\"_blank\"\u003eTimer Code\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/5672-halo-hd-leds-microbit-example-code-stop-watch.zip\" target=\"_blank\"\u003eStop Watch Code\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/5672-halo-hd-leds-microbit-example-code-sound-meter.zip\" target=\"_blank\"\u003eSound Meter Code\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":31285083734099,"sku":"KIT-5672","price":21.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5672_press-4-kitronik-halo-hd-microbit-leds-illuminated.jpg?v=1578482569"}],"url":"https:\/\/shop.pimoroni.com\/en-eu\/collections\/micro-bit-uk.oembed","provider":"Pimoroni Ltd","version":"1.0","type":"link"}