{"title":"Last chance","description":"","products":[{"product_id":"mote-phat","title":"Mote pHAT","description":"\u003cp\u003eMote pHAT lets you run our beautiful \u003ca href=\"\/en-eu\/collections\/mote\" target=\"_blank\"\u003eMote lights\u003c\/a\u003e straight from your Pi or Pi Zero, for a super-compact setup. Connect up to 4 \u003ca href=\"\/en-eu\/collections\/mote\" target=\"_blank\"\u003eMote light strips\u003c\/a\u003e, with our \u003ca href=\"\/en-eu\/collections\/mote\" target=\"_blank\"\u003eMote cables\u003c\/a\u003e, to the 4 channels provided and away you go! That's up to 64 pixels.\u003c\/p\u003e\n\u003cp\u003eThe socket header comes un-soldered, so you can combine Mote pHAT with our other pHATs to display sensor readings or control Mote with buttons or switches.\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/www.raspberrypi.org\/magpi-issues\/MagPi53.pdf\" target=\"_blank\"\u003eThe MagPi\u003c\/a\u003e said that \u003cem\u003e\"Mote pHAT offers a compact, discreet way of controlling them without the need to connect to the USB port of a laptop or Pi\"\u003c\/em\u003e and that it was \u003cem\u003e\"great value\"\u003c\/em\u003e in their four star review.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eFour Mote channels (using microUSB connectors)\u003c\/li\u003e\n\u003cli\u003eUp to 64 RGB LEDs with 4 of our 16 pixel Mote strips\u003c\/li\u003e\n\u003cli\u003e2x LC125A quadruple bus buffer gates\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/pinout.xyz\/pinout\/mote_phat\" target=\"_blank\"\u003eMote pHAT pinout\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003eCompatible with all 40-pin header Raspberry Pi models\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/mote-phat\" target=\"_blank\"\u003ePython library\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eSocket header requires soldering\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eWe've put together a \u003ca href=\"https:\/\/github.com\/pimoroni\/mote-phat\" target=\"_blank\"\u003ePython library\u003c\/a\u003e to make using Mote pHAT really simple, and ported many of the examples from our standalone Mote library especially for Mote pHAT.\u003c\/p\u003e\n\u003ch2\u003eKits\u003c\/h2\u003e\n\u003cp\u003eWe've also put together some handy Mote pHAT kits that include:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMote pHAT and socket header (requires soldering)\u003c\/li\u003e\n\u003cli\u003e4 \u003ca href=\"\/en-eu\/products\/mote?variant=41671760010\" target=\"_blank\" data-mce-href=\"\/en-eu\/products\/mote?variant=41671760010\"\u003ebright white\u003c\/a\u003e or \u003ca href=\"\/en-eu\/products\/mote?variant=41671767114\" target=\"_blank\" data-mce-href=\"\/en-eu\/products\/mote?variant=41671767114\"\u003ealternating white and RGB\u003c\/a\u003e Mote LED sticks\u003c\/li\u003e\n\u003cli\u003e4 \u003ca href=\"\/en-eu\/products\/mote-module-cable?variant=26219253959\" target=\"_blank\"\u003eMote cables\u003c\/a\u003e (1m) to plug them in\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"\/en-eu\/products\/usb-a-to-microb-cable-red?variant=32065140746\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUSB A to microB cable\u003c\/a\u003e (1m) for powering your Pi Zero \/ Zero W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003ePerfect for whipping up some smart programmable lighting for your desk, kitchen, or a nearby \u003ca href=\"https:\/\/www.ikea.com\/gb\/en\/cat\/kallax-series-27534\/\" target=\"_blank\"\u003eIkea Kallax\u003c\/a\u003e (the Mote strips fit conveniently in the segments) - you just need to add a Raspberry Pi. Check out Ellora's \u003ca href=\"https:\/\/www.youtube.com\/watch?v=mra8ELGk_JA\" target=\"_blank\" data-mce-href=\"https:\/\/www.youtube.com\/watch?v=mra8ELGk_JA\"\u003esmart bin reminder\u003c\/a\u003e video for some inspiration!\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Mote pHat + Mote Sticks - Bright White","offer_id":39540524974163,"sku":"PIM591","price":33.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/Mote_pHAT_2_of_4.JPG?v=1539264291"},{"product_id":"line-following-add-on-for-move-mini-v2","title":"Line Following add-on for :MOVE mini V2","description":"\u003cp\u003eAdd line following functionality to the \u003ca href=\"\/en-eu\/products\/move-mini-mk2-buggy-kit\" target=\"_blank\"\u003eKitronik MOVE mini MK2\u003c\/a\u003e for the BBC micro:bit with this easy to assemble add-on kit.\u003c\/p\u003e\n\u003cp\u003eThis version of the line following add on has been designed to fit both the new :MOVE mini MK2 and the original version. The assembly instructions for both can be found in the Resources section below.\u003c\/p\u003e\n\u003cp\u003eThis add-on comes with all the parts required to add line following functionality to the :MOVE mini and does not require any soldering. Once built, the sensitivity of the left and right sensors can be individually tweaked to ensure smooth operation.\u003c\/p\u003e\n\u003cp\u003eSee the resource section below to download the line following code example. By default the code will cause the buggy to follow a dark line on a light background but the code can be altered to do the opposite.\u003c\/p\u003e\n\u003cp\u003eThere is no soldering required but the kit does require some mechanically assembly.\u003c\/p\u003e\n\u003ch2\u003eFeatures:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eAdd line following functionality to the :MOVE mini for the BBC micro:bit.\u003c\/li\u003e\n\u003cli\u003eCan either follow a dark line on a light back ground or a light line on a dark background.\u003c\/li\u003e\n\u003cli\u003eThe line following sensitivity can be adjusted with a screwdriver.\u003c\/li\u003e\n\u003cli\u003eNo Soldering required.\u003c\/li\u003e\n\u003cli\u003eExample line following code is provided.\u003c\/li\u003e\n\u003cli\u003eThis product is backwards compatible with the first version of :MOVE mini. There are two sets of assembly instructions in the resources section below.\u003c\/li\u003e\n\u003cli\u003eCompatible with\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/new-micro-bit-v2\" target=\"_blank\" data-mce-href=\"\/en-eu\/products\/new-micro-bit-v2\"\u003emicro:bit\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003ev1 and v2!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eContents:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x :MOVE Sensor Interface for the BBC micro:bit.\u003c\/li\u003e\n\u003cli\u003e1 x :MOVE Line Following board for the BBC micro:bit.\u003c\/li\u003e\n\u003cli\u003e1 x Connector Cable.\u003c\/li\u003e\n\u003cli\u003e2 x CS M3 8mm Screws.\u003c\/li\u003e\n\u003cli\u003e2 x M3 Hex Full Width Nut.\u003c\/li\u003e\n\u003cli\u003e5 x CS M3 12mm Screws.\u003c\/li\u003e\n\u003cli\u003e2 x 6mm Spacers.\u003c\/li\u003e\n\u003cli\u003e2 x 12mm CS Screws.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eRequires:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/products\/move-mini-mk2-buggy-kit\" target=\"_blank\"\u003e:MOVE mini buggy kit.\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x \u003ca href=\"\/en-eu\/products\/microbit\" target=\"_blank\"\u003eBBC micro:bit\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e1 x Micro USB Cable.\u003c\/li\u003e\n\u003cli\u003e1 x Small flat bladed screwdriver.\u003c\/li\u003e\n\u003cli\u003e1 x Small phillips screwdriver.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eResources:\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca title=\"Line Follower Assembly Instructions MK1\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5659-line-following-assembly-instructions-mk1.pdf\" target=\"_blank\"\u003eLine Follower Assembly Instructions - MK1\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Line Follower Assembly Instructions MK2\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5659-line-following-assembly-instructions-mk2.pdf\" target=\"_blank\"\u003eLine Follower Assembly Instructions - MK2\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/www.kitronik.co.uk\/zip\/microbit-Line-Follower.zip\" target=\"_blank\"\u003eLine Following Code HEX file\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Sensor Interface Assembly Instructions\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5628-move-sensor-interface-board-microbit-assembly-instructions.pdf\" target=\"_blank\"\u003eSensor Interface board Assembly Instructions\u003c\/a\u003e.\u003c\/li\u003e\n\u003cli\u003e\n\u003ca title=\"Line Follower Datasheet\" href=\"https:\/\/www.kitronik.co.uk\/pdf\/5629-move-line-following-board-microbit-datasheet.pdf\" target=\"_blank\"\u003eLine Follower Datasheet\u003c\/a\u003e.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kitronik","offers":[{"title":"Default Title","offer_id":29440895549523,"sku":"KIT-5659","price":12.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/5659_additional-line-following-add-on-move-mini-microbit-action.jpg?v=1565108430"},{"product_id":"revpi-gates","title":"RevPi Gates","description":"\u003cp\u003eIntegrate Revolution Pi into an industrial network\u003c\/p\u003e\n\u003cp\u003eIt is not easy to integrate a device into an industrial network. Special protocols are often used for data transmission, such as Profinet or Profibus. However, when using these gateways integrating Revolution Pi into an industrial network is no problem.\u003c\/p\u003e\n\u003cp\u003eLike all Revolution Pi expansion modules, the gateways are also connected to the base module RevPi Core via the overhead Pi Bridge connector. Thus, up to two gateway modules can be used per system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThe cyclic data exchange between gateway and the central process image of the RevPi Core 3 takes place every 5 ms\u003c\/strong\u003e, regardless of the bus protocol and system configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDue to the required processing power, we recommend the use of gateways exclusively in conjunction with the Quad-Core equipped RevPi Core 3\u003c\/strong\u003e.\u003c\/p\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003e\u003c\/th\u003e\n\u003cth\u003ePROFIBUS\u003c\/th\u003e\n\u003cth\u003eEtherNet\/IP\u003c\/th\u003e\n\u003cth\u003ePROFINET IRT\u003c\/th\u003e\n\u003cth\u003eDMX\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaster\/Slave\u003c\/td\u003e\n\u003ctd\u003eSlave\u003c\/td\u003e\n\u003ctd\u003eSlave\u003c\/td\u003e\n\u003ctd\u003eSlave\u003c\/td\u003e\n\u003ctd\u003eMaster\/Slave\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBus connector\u003c\/td\u003e\n\u003ctd\u003eD-SUB 9F\u003c\/td\u003e\n\u003ctd\u003e2 x RJ45\u003c\/td\u003e\n\u003ctd\u003e2 x RJ45\u003c\/td\u003e\n\u003ctd\u003e8 pole \/ pitch 3.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMax. baud rate\u003c\/td\u003e\n\u003ctd\u003eup to 12 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003e100 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003e100 Mbit\/s\u003c\/td\u003e\n\u003ctd\u003e-\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eI\/O Data\u003c\/td\u003e\n\u003ctd\u003e244 Bytes\u003c\/td\u003e\n\u003ctd\u003e512 Bytes\u003c\/td\u003e\n\u003ctd\u003e512 Bytes\u003c\/td\u003e\n\u003ctd\u003e512 Bytes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eEtherNet\/IP gateway module is solely compatible with the ethernet based fieldbus protocol EtherNet\/IP. Please don't mistake EtherNet\/IP protocol with TCP\/IP protocol!\u003c\/li\u003e\n\u003cli\u003e24V power supply is mandatory. Gateways don`t work with 12V!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eCertification\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/UL_Certificate.pdf?v=1594978740\" target=\"_blank\" rel=\"noopener noreferrer\"\u003eUL certificate (US \u0026amp; Canada)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Kunbus GmbH","offers":[{"title":"PROFIBUS","offer_id":31707922661459,"sku":"PR100069","price":180.0,"currency_code":"GBP","in_stock":true},{"title":"DMX","offer_id":31707922759763,"sku":"PR100237","price":142.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/kunbus_100069_gate_profibus_slave.jpg?v=1589384297"}],"url":"https:\/\/shop.pimoroni.com\/en-eu\/collections\/last-chance.oembed","provider":"Pimoroni Ltd","version":"1.0","type":"link"}