{"title":"Addressable RGB LED Strips","description":"","products":[{"product_id":"flexible-rgb-led-strip-dotstar-apa102-sk9822-compatible","title":"Flexible RGB LED Strip (aka DotStar, APA102, SK9822)","description":"\u003cp\u003eThese individually-addressable RGB LED strips are great for all sorts of uses: custom desk lighting, music or data visualisation (an LED thermometer?), or art installations. They come in three different pixel-spacings.\u003c\/p\u003e\n\u003cp\u003eAddressable LEDs, like these DotStar-compatible ones, let you individually set each LED in the chain to a specific RGB colour. You can use a Raspberry Pi, Arduino, micro:bit, or other microcontroller to code them, and there are tonnes of different \u003ca href=\"https:\/\/github.com\/pimoroni\/blinkt\"\u003ePython\u003c\/a\u003e, MicroPython (or \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_CircuitPython_DotStar\"\u003eCircuitPython\u003c\/a\u003e), \u003ca href=\"https:\/\/github.com\/FastLED\/FastLED\"\u003eArduino\u003c\/a\u003e, and more code libraries available.\u003c\/p\u003e\n\u003cp\u003eThese LED strips come in three different spacings—30 , 60, or 144 pixels per metre—and in metre lengths, so \u003cstrong\u003eif you order a quantity of 1 then you'll get 1 metre\u003c\/strong\u003e, a quantity of 2 is 2 metres, and so on...\u003c\/p\u003e\n\u003cp\u003eThe strips come with a flexible silicone waterproof sleeve, but this can be easily removed, if you like. If your metre length doesn't have a connector on one or other end, then you can use a little blob of hot glue or silicone sealant to seal the flexible sleeve.\u003c\/p\u003e\n\u003ch2\u003eWiring\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003ePlease note! \u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan\u003eOur \u003c\/span\u003e\u003cstrong\u003e30 and 60 pixel per metre\u003c\/strong\u003e\u003cspan\u003e LED strips come on 5m reels. If you order less than 5m you'll get a partial reel - this means you're not guaranteed to get a connector on the data in end. \u003c\/span\u003e\u003cspan\u003eWe sell suitable connectors separately - check out the extras!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003c\/span\u003e\u003cstrong\u003e144 pixels per metre\u003c\/strong\u003e\u003cspan\u003e strips come ready-made in 1 metre lengths, so you'll always get a connector on both ends of those strips.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe wires are as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRed: 5V\u003c\/li\u003e\n\u003cli\u003eGreen: data\u003c\/li\u003e\n\u003cli\u003eYellow: clock\u003c\/li\u003e\n\u003cli\u003eBlack: ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eDimensions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eWith silicone sleeve: 13mm wide\u003c\/li\u003e\n\u003cli\u003eWithout silicone sleeve: 10mm wide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"144 pixels per metre","offer_id":30260033257555,"sku":"COM3208","price":27.0,"currency_code":"GBP","in_stock":true},{"title":"60 pixels per metre","offer_id":30260033224787,"sku":"COM3207","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"30 pixels per metre","offer_id":30260033192019,"sku":"COM3206","price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/sk9822-1.jpg?v=1569426924"},{"product_id":"flexible-rgbw-led-strip-neopixel-ws2812-sk6812-compatible","title":"Flexible RGB+W LED Strip (1 metre)","description":"\u003cp\u003eThese individually-addressable (NeoPixel compatible) RGBW LED strips are great for all sorts of uses: custom desk lighting, music or data visualisation (an LED thermometer?), or art installations. They come in three different pixel-spacings.\u003c\/p\u003e\n\u003cp\u003eAddressable LEDs, like these NeoPixel-compatible ones, let you individually set each LED in the chain to a specific RGB (or RGBW—red, green, blue, white—in this case) colour. You can use a Raspberry Pi, Arduino, micro:bit, or other microcontroller to code them, and there are tonnes of different \u003ca href=\"https:\/\/github.com\/pimoroni\/unicorn-hat\"\u003ePython\u003c\/a\u003e, MicroPython (or \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_CircuitPython_NeoPixel\"\u003eCircuitPython\u003c\/a\u003e), \u003ca href=\"https:\/\/github.com\/FastLED\/FastLED\"\u003eArduino\u003c\/a\u003e, and more code libraries available.\u003c\/p\u003e\n\u003cp\u003eThe extra warm white LED in these strips lets you set them to a nicer pure white colour, or to mix in white with the other RGB colours for lovely pastel hues.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThese LED strips come in three different spacings—30 , 60, or 144 pixels per metre—and in metre lengths, so \u003cstrong\u003eif you order a quantity of 1 then you'll get \u003c\/strong\u003e\u003c\/span\u003e\u003cstrong\u003e1\u003c\/strong\u003e\u003cspan\u003e\u003cstrong\u003e metre\u003c\/strong\u003e, a quantity of 2 is 2 metres, and so on...\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003c\/strong\u003e\u003cstrong data-mce-fragment=\"1\"\u003ePlease note! \u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003eOur \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e30 and 60 pixel per metre\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e LED strips come on 5m reels. If you order less than 5m you'll get a partial reel - this means you're not guaranteed to get a connector on the data in end. We sell suitable solder and no-solder connectors separately - check out the extras tab! The \u003c\/span\u003e\u003cstrong data-mce-fragment=\"1\"\u003e144 pixels per metre\u003c\/strong\u003e\u003cspan data-mce-fragment=\"1\"\u003e strips come ready-made in 1 metre lengths, so you'll always get a connector on both ends of those strips.\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe strips come with a flexible silicone waterproof sleeve, but this can be easily removed, if you like. If your metre length doesn't have a connector on one or other end, then you can use a little blob of hot glue or silicone sealant to seal \u003c\/span\u003e\u003cspan\u003ethe flexible sleeve\u003c\/span\u003e\u003cspan\u003e.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe wires are as follows:\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRed: 5V\u003c\/li\u003e\n\u003cli\u003eGreen: data\u003c\/li\u003e\n\u003cli\u003eWhite: ground\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"144 pixels per metre","offer_id":30260032733267,"sku":"COM3205","price":27.0,"currency_code":"GBP","in_stock":true},{"title":"60 pixels per metre","offer_id":30260032700499,"sku":"COM3204","price":12.0,"currency_code":"GBP","in_stock":true},{"title":"30 pixels per metre","offer_id":30260032667731,"sku":"COM3203","price":7.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/sk6812-rgbw-1.jpg?v=1569426932"},{"product_id":"flexible-rgb-led-strip-neopixel-ws2812-sk6812-compatible","title":"Flexible RGB LED Strip (aka NeoPixel, WS2812, SK6812)","description":"\u003cp\u003eThese individually-addressable RGB LED strips are great for all sorts of uses: custom desk lighting, music or data visualisation (an LED thermometer?), or art installations. They come in three different pixel-spacings.\u003c\/p\u003e\n\u003cp\u003eAddressable LEDs, like these NeoPixel-compatible ones, let you individually set each LED in the chain to a specific RGB colour. You can use a Raspberry Pi, Arduino, micro:bit, or other microcontroller to code them, and there are tonnes of different \u003ca href=\"https:\/\/github.com\/pimoroni\/unicorn-hat\" data-mce-href=\"https:\/\/github.com\/pimoroni\/unicorn-hat\"\u003ePython\u003c\/a\u003e, MicroPython (or \u003ca href=\"https:\/\/github.com\/adafruit\/Adafruit_CircuitPython_NeoPixel\" data-mce-href=\"https:\/\/github.com\/adafruit\/Adafruit_CircuitPython_NeoPixel\"\u003eCircuitPython\u003c\/a\u003e), \u003ca href=\"https:\/\/github.com\/FastLED\/FastLED\" data-mce-href=\"https:\/\/github.com\/FastLED\/FastLED\"\u003eArduino\u003c\/a\u003e, and more code libraries available.\u003c\/p\u003e\n\u003cp\u003eThese LED strips come in three different spacings—30 , 60, or 144 pixels per metre—and in it's sold in metre lengths, so \u003cstrong\u003eif you order a quantity of 1 then you'll get 1 metre\u003c\/strong\u003e, a quantity of 2 is 2 metres, and so on...\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe strips come with a flexible silicone waterproof sleeve, but this can be easily removed, if you like. If your metre length doesn't have a connector on one or other end, then you can use a little blob of hot glue or silicone sealant to seal the flexible sleeve.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cspan\u003eWiring\u003c\/span\u003e\u003c\/h3\u003e\n\u003cp\u003e\u003cspan\u003e\u003cstrong\u003ePlease note!  \u003c\/strong\u003eOur \u003cstrong\u003e30 and 60 pixels per metre\u003c\/strong\u003e LED strips come on 5m reels. If you order less than 5m you'll get a partial reel - this means you're not guaranteed to get a connector on the data in end. We sell suitable connectors separately - check out the extras!\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eThe \u003cstrong\u003e144 pixels per metre\u003c\/strong\u003e strips come ready-made in 1 metre lengths, so you'll always get a connector on both ends of those strips.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eThe wires are as follows:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRed: 5V\u003c\/li\u003e\n\u003cli\u003eGreen: data\u003c\/li\u003e\n\u003cli\u003eWhite: ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eDimensions\u003c\/h3\u003e\n\u003cp\u003e(W x H, with diffuser, approx)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCOM3200 \/ 30 pixels per metre - 11.6mm x 3mm\u003c\/li\u003e\n\u003cli\u003eCOM3201 \/ 60 pixels per metre - 12mm x 3mm\u003c\/li\u003e\n\u003cli\u003eCOM3202 \/ 144 pixels per metre - 14mm x 3mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNotes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Opsco_RoHS_3_Compliance_Declaration_20211130.pdf?v=1646649498\" data-mce-href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Opsco_RoHS_3_Compliance_Declaration_20211130.pdf?v=1646649498\" target=\"_blank\"\u003eRoHS \u0026amp; REACH declaration\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"144 pixels per metre","offer_id":30260032110675,"sku":"COM3202","price":22.0,"currency_code":"GBP","in_stock":true},{"title":"60 pixels per metre","offer_id":30260032077907,"sku":"COM3201","price":9.5,"currency_code":"GBP","in_stock":true},{"title":"30 pixels per metre","offer_id":30260032045139,"sku":"COM3200","price":6.25,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/sk6812-rgb-1.jpg?v=1569426951"},{"product_id":"rgb-led-wire","title":"5m Flexible RGB LED Wire - 50 RGB LEDs (aka NeoPixel, WS2812, SK6812)","description":"\u003cp\u003eThese individually-addressable RGB LED wires are great for all sorts of uses: custom desk lighting, music or data visualisation (an LED thermometer?), or art installations.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5 metres long with 50 individually addressable LEDs\u003c\/li\u003e\n\u003cli\u003eWS2812\/NeoPixel compatible\u003c\/li\u003e\n\u003cli\u003eSuper-flexible and thin, ideal for tight spaces\u003c\/li\u003e\n\u003cli\u003eEach end comes fitted with a handy connector\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAddressable LEDs, like these NeoPixel-compatible ones, let you individually set each LED in the chain to a specific RGB colour. You can use a Raspberry Pi, Arduino, micro:bit, or other microcontroller to code them, and there are tonnes of different Python, MicroPython (or CircuitPython), Arduino, and more code libraries available.\u003c\/p\u003e\n\u003cp\u003ePlease note that our current batch of RGB LED wire is copper coloured, not silver coloured.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eInput Voltage: 5VDC\u003c\/li\u003e\n\u003cli\u003eMaximum Output Power: 0.3W\/LED\u003c\/li\u003e\n\u003cli\u003eCable length: 5m\u003c\/li\u003e\n\u003cli\u003eEmitted Color: RGB\u003c\/li\u003e\n\u003cli\u003eLED Type: WS2812\/NeoPixel\u003c\/li\u003e\n\u003cli\u003eLED Quantity: 10 LEDs\/m (50 LEDs total)\u003c\/li\u003e\n\u003cli\u003eDimensions approx. 5000 x 7 x 2mm\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -20~50°\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePinout\u003c\/h2\u003e\n\u003cp\u003eFor the connector orientation in the image below, the pinout from left to right is GND, DATA, 5V. The end of the wire with the female connector attached (the one on the right of the photo) is the end that you need to connect your microcontroller to. \u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/RGB_LED_wire_connections_240x240.jpg?v=1590769535\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWarning:\u003c\/strong\u003e It's possible to short circuit the wires together if the led wire is bundled up so ensure they are separated before powering up!\u003c\/p\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":31607418159187,"sku":"COM3210","price":15.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/COM3210.jpg?v=1590854175"},{"product_id":"neon-like-rgb-led-strip-with-diffuser-neopixel-ws2812-sk6812-compatible","title":"Neon-like RGB LED Strip with Diffuser (aka NeoPixel, WS2812, SK6812)","description":"\u003cp\u003eThis individually addressable RGB LED strip is encapsulated in a chunky silicone diffuser which diffuses light sideways for a snazzy neon effect.\u003c\/p\u003e\n\u003cp\u003eIt is sold in individual 1m strips with \u003cstrong\u003e96 LEDs per metre\u003c\/strong\u003e, with a connector at both ends so you you can easily chain multiple strips together. There's also extra power\/ground wires at both ends of each strip so you can inject additional power if you're running long lengths of the stuff. Beneath the silicone, there are solder pads between each LED if you want to chop and splice lengths together.\u003c\/p\u003e\n\u003cp\u003eThe silicone casing is \u003cstrong\u003eopaque white on three sides and translucent on one of the narrow sides,\u003c\/strong\u003e so it's good for using as a glowy edging for things, making nifty signage or incorporating into your Tron-inspired home decor. It's dust and water splash resistant, but it has no water ingress resistance so we wouldn't recommend installing it permanently outside.\u003c\/p\u003e\n\u003cp\u003eWe measured the power consumption of these LEDs at around 0.9A p\/m (full white) and 0.6A p\/m (rainbows).\u003c\/p\u003e\n\u003cp\u003eHere's how to hook it up:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRed - 5V\u003c\/li\u003e\n\u003cli\u003eGreen - data\u003c\/li\u003e\n\u003cli\u003eWhite - ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/P1040488-Edit_1024x1024.jpg?v=1637149300\" target=\"_blank\" rel=\"noopener noreferrer\"\u003econnector with sockets\u003c\/a\u003e is the data-in end that needs connecting to your microcontroller.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e96 RGB LEDs per metre, individually addressable\u003c\/li\u003e\n\u003cli\u003ePower: 15W\/M\u003c\/li\u003e\n\u003cli\u003eInput voltage: 5V DC\u003c\/li\u003e\n\u003cli\u003eWater resistance: IP65\u003c\/li\u003e\n\u003cli\u003eLength 1m\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":39346118262867,"sku":"COM3213","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/led-neon-strip-1.jpg?v=1627465475"},{"product_id":"neon-like-rgb-micro-led-strip","title":"Ultra-dense RGB Micro LED Strip (aka NeoPixel, WS2812, SK6812)","description":"\u003cp\u003eThis ultra concentrated RGB LED strip crams in 332 tiny individually addressable LEDs per metre, with a narrow silicon diffuser strip over the top for a cool neon effect.\u003c\/p\u003e\n\u003cp\u003eIt's sold in 0.5m and 1m strips, with a connector at both ends so you you can easily chain multiple strips together. There's also extra power\/ground wires at both ends of each strip so you can inject additional power if you're running long lengths of the stuff. There are solder pads hidden beneath the sticky layer on the back of the strip if you want to chop it up and splice bits together.\u003c\/p\u003e\n\u003cp\u003eBecause the LEDs are small, the power consumption of this strip is less than you might expect, we measured 1080mA per metre on full white and 750mA per metre doing rainbows (both with maximum brightness).\u003c\/p\u003e\n\u003cp\u003eHere's how to hook it up:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRed - 5V\u003c\/li\u003e\n\u003cli\u003eGreen - data\u003c\/li\u003e\n\u003cli\u003eWhite - ground\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe female connector is the data-in end that needs connecting to your microcontroller.\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e332 RGB LEDs per metre, individually addressable\u003c\/li\u003e\n\u003cli\u003ePower: 15W\/M\u003c\/li\u003e\n\u003cli\u003eInput voltage: 5V DC\u003c\/li\u003e\n\u003cli\u003eWater resistance: IP20 (for indoor use only)\u003c\/li\u003e\n\u003cli\u003eLength 0.5 or 1m\u003c\/li\u003e\n\u003cli\u003eWidth of strip: 10mm\u003c\/li\u003e\n\u003cli\u003eWidth of diffuser: 5mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eThe solder pads on the back are positioned between every five LEDs. There are markings on the back to guide you if you're wanting to cut it up - make sure to cut through the middle of the boxes to avoid hitting the LEDs.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThe LEDs are embedded in the silicon diffuser, so it probably wouldn't be possible to (easily) remove it.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"1m","offer_id":39395564552275,"sku":"COM3211","price":41.5,"currency_code":"GBP","in_stock":true},{"title":"0.5m","offer_id":39395564585043,"sku":"COM3212","price":25.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/led-strip-1_a88b3f7c-1b98-42ad-ae26-a73a2e897081.jpg?v=1622640068"},{"product_id":"plasma-2040","title":"Plasma 2040","description":"\u003cp\u003eSwathe everything in rainbows with this all-in-one, USB-C powered controller for WS2812\/Neopixel and APA102\/Dotstar addressable LED strip.\u003c\/p\u003e\n\u003cp\u003ePlasma 2040 is a RP2040-based driver board for addressable LED strip (also known as magical rainbows by the metre). It's designed to make rigging up bits of \u003cstrong\u003ecustom, programmable lighting\u003c\/strong\u003e as straightforward as possible - perfect for whipping up some quick under-cupboard illumination, dramatically underlighting your sofa or providing some atmospheric mood-lighting for your workspace, PC or vivarium.\u003c\/p\u003e\n\u003cp\u003ePlasma 2040 is \u003cstrong\u003epowered and programmable by USB-C\u003c\/strong\u003e and, because USB-C is capable of drawing up to 3A of power, that's enough to power a healthy chunk of LEDs. There's three \u003cstrong\u003euseful buttons\u003c\/strong\u003e that you could use for turning the lights on and off or to switch between colours or effects, plus a reset button and an eternally popular \u003cstrong\u003eonboard RGB LED\u003c\/strong\u003e.\u003c\/p\u003e\n\u003cp\u003eWe've also popped a \u003cstrong\u003eQW\/ST connector\u003c\/strong\u003e on there, to make it super easy to plug in \u003ca href=\"\/en-eu\/collections\/qwiic\" target=\"_blank\"\u003eQwiic\u003c\/a\u003e or \u003ca href=\"\/en-eu\/collections\/stemma-qt\" target=\"_blank\"\u003eSTEMMA QT\u003c\/a\u003e breakouts - how about hooking up an \u003ca href=\"\/en-eu\/products\/rgb-potentiometer-breakout\" target=\"_blank\"\u003eRGB potentiometer\u003c\/a\u003e to adjust the speed or hue of your lights, an \u003ca href=\"\/en-eu\/products\/bme688-breakout\" target=\"_blank\"\u003eair quality sensor\u003c\/a\u003e to make your desk lighting into a giant thermometer or tell you when you should crack a window or a \u003ca href=\"\/en-eu\/products\/ltr-559-light-proximity-sensor-breakout\" target=\"_blank\"\u003elight sensor\u003c\/a\u003e to turn them on automatically when it gets dark?\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePowered by RP2040 (Dual Arm Cortex M0+ running at up to 133Mhz with 264kB of SRAM)\u003c\/li\u003e\n\u003cli\u003e2MB of QSPI flash supporting XiP\u003c\/li\u003e\n\u003cli\u003eCompatible with 5V WS2812\/Neopixel\/SK6812 and APA102\/Dotstar\/SK9822 LEDs\u003c\/li\u003e\n\u003cli\u003eScrew terminals for attaching your LED strip.\u003c\/li\u003e\n\u003cli\u003eUSB-C connector for power and programming (3A max)\u003c\/li\u003e\n\u003cli\u003eQw\/ST (Qwiic\/STEMMA QT) connector\u003c\/li\u003e\n\u003cli\u003eLow side current sensing (accessible via ADC3)\u003c\/li\u003e\n\u003cli\u003eReset, BOOT and two user buttons (the BOOT button can also be used as a user button)\u003c\/li\u003e\n\u003cli\u003eRGB LED\u003c\/li\u003e\n\u003cli\u003eFully-assembled (no soldering required)\u003c\/li\u003e\n\u003cli\u003eMeasurements: approx 50 x 28 x 12mm (L x W x H, including connectors)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/pimoroni-pico\" target=\"_blank\"\u003eC++\/MicroPython libraries\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/plasma2040_schematic.pdf?v=1629994431\" target=\"_blank\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener noreferrer\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/plasma-2040-dimensions.png?v=1667905434\" target=\"_blank\"\u003eDimensions\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cb\u003eLED strip and connectors are sold separately, check out the extras tab for some options!\u003c\/b\u003e\u003c\/p\u003e\n\u003ch2\u003eSoftware\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cp\u003eYou can program Plasma 2040 with \u003cstrong\u003eC\/C++\u003c\/strong\u003e or \u003cstrong\u003eMicroPython\u003c\/strong\u003e in the same way as you would a Raspberry Pi Pico. \u003cspan\u003eYou'll get best performance using C++, but if you're a beginner we'd recommend using our batteries included MicroPython build for ease of getting started.\u003c\/span\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/plasma\" rel=\"noopener\" target=\"_blank\"\u003ePlasma MicroPython firmware and examples\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/pimoroni-pico\/tree\/main\/examples\/plasma2040\" target=\"_blank\"\u003e\u003cspan\u003eC++ examples\u003c\/span\u003e\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eYou can also use \u003cstrong\u003eCircuitPython\u003c\/strong\u003e on your Plasma 2040! CircuitPython is an easy to use, well-established ecosystem with lots of example code and drivers for interfacing with different kinds of hardware.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/circuitpython.org\/board\/pimoroni_plasma2040\/\" target=\"_blank\"\u003eDownload CircuitPython for Plasma 2040\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/welcome-to-circuitpython\" target=\"_blank\"\u003eWelcome to CircuitPython\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConnecting Breakouts\u003c\/h2\u003e\n\u003cp\u003eIf your breakout has a QW\/ST connector on board, you can plug it straight in with a \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible?variant=31910609813587\" target=\"_blank\"\u003eJST-SH to JST-SH cable\u003c\/a\u003e, or you can easily connect any of our I2C breakouts with a \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible?variant=31910609813587\" target=\"_blank\"\u003eJST-SH to JST-SH cable\u003c\/a\u003e coupled with a \u003ca href=\"\/en-eu\/products\/stemma-qt-qwiic-to-breakout-garden-adapter\" target=\"_blank\"\u003eQw\/ST to Breakout Garden adaptor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/pimoroni-pico#breakouts\" target=\"_blank\"\u003eBreakouts currently compatible with our C++\/MicroPython build\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe've also broken out a set of I2C pins, analog pins and debug pins so you can solder things like breakouts or analog potentiometers directly to them (or solder on a strip of header and plug the whole shebang into a breadboard).\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eOur C++\/MicroPython software uses the RP2040's PIO state machines to drive each strip separately - this board only has one set of LED strip connectors, but if you're up for some inventive wiring it's possible to drive multiple strips simultaneously, even if they're of different types!\u003c\/li\u003e\n\u003cli\u003eIf you're curious about how much current your LEDs are consuming, we've incorporated some current sensing circuitry onto this board, which you can measure by reading ADC3. You could use this in your code to do things like adjusting the brightness of your LEDs based on available power!\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eAbout RP2040\u003c\/h2\u003e\n\u003cp\u003eRaspberry Pi's RP2040 microcontroller is a dual core ARM Cortex M0+ running at up to 133Mhz. It bundles in 264kB of SRAM, 30 multifunction GPIO pins (including a four channel 12-bit ADC), a heap of standard peripherals (I2C, SPI, UART, PWM, clocks, etc), and USB support.\u003c\/p\u003e\n\u003cp\u003eOne very exciting feature of RP2040 is the programmable IOs which allow you to execute custom programs that can manipulate GPIO pins and transfer data between peripherals - they can offload tasks that require high data transfer rates or precise timing that traditionally would have required a lot of heavy lifting from the CPU.\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":39410354847827,"sku":"PIM582","price":11.75,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/plasma-2040-square.jpg?v=1629988129"},{"product_id":"plasma-stick-2040-w","title":"Plasma Stick 2040 W (Pico W Aboard)","description":"\u003cp\u003eThis perky Pico W-powered controller for WS2812\/Neopixel\/SK6812 LEDs is perfect for coding up some wireless blinkenlight shenanigans.\u003c\/p\u003e\n\u003cp\u003ePlasma Stick 2040 W is a simple RP2040-powered driver board designed to make playing with addressable LED strips easy peasy rainbow squeezy. We've taken a Raspberry Pi Pico W and added a set of \u003cstrong\u003escrew terminals\u003c\/strong\u003e to make it easy to connect up your LEDs and \u003cstrong\u003eboost circuitry\u003c\/strong\u003e so they get a nice clean 5V on the power and data lines. We've also added a \u003cstrong\u003ereset button\u003c\/strong\u003e (because unplugging your USB cable all the time is tedious) and a \u003cstrong\u003eQw\/ST (Qwiic\/STEMMA QT) connector\u003c\/strong\u003e so you can connect it up to breakouts, all without soldering.\u003c\/p\u003e\n\u003cp\u003eWe've designed this board with doing \u003cstrong\u003ecool LED things with wireless\u003c\/strong\u003e in mind, so it doesn't have all the fancy features that you can find on Plasma 2040 - if you'd prefer mod cons like current sensing, buttons, APA102\/Dotstar compatibility and USB-C, \u003ca href=\"\/en-eu\/products\/plasma-2040\" target=\"_blank\"\u003etake a look\u003c\/a\u003e!\u003c\/p\u003e\n\u003cp\u003ePrefer to pick up a kit that includes a Plasma Stick, LEDs and everything else you need to get going? Check out \u003ca href=\"\/en-eu\/products\/wireless-plasma-kit\" target=\"_blank\"\u003eWireless Plasma Kit\u003c\/a\u003e!\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eRaspberry Pi Pico W Aboard\u003c\/li\u003e\n\u003cul\u003e\n\u003cli\u003eDual Arm Cortex M0+ running at up to 133Mhz with 264kB of SRAM\u003c\/li\u003e\n\u003cli\u003e2MB of QSPI flash supporting XiP\u003c\/li\u003e\n\u003cli\u003ePowered and programmable by USB micro-B\u003c\/li\u003e\n\u003cli\u003e2.4GHz wireless\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cli\u003eCompatible with 5V WS2812\/Neopixel\/SK6812 LEDs\u003c\/li\u003e\n\u003cli\u003eScrew terminals for attaching your LED strip.\u003c\/li\u003e\n\u003cli\u003eReset button\u003c\/li\u003e\n\u003cli\u003eQw\/ST (Qwiic\/STEMMA QT) connector\u003c\/li\u003e\n\u003cli\u003eFully-assembled (no soldering required)\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/pimoroni-pico\" target=\"_blank\"\u003eC++\/MicroPython libraries\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/plasma_stick_schematic.pdf?v=1667910096\" target=\"_blank\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eLED strip and connectors are sold separately, check out the extras tab for some options!\u003c\/p\u003e\n\u003ch2\u003eSoftware\u003c\/h2\u003e\n\u003cp\u003eYou can program Pico\/RP2040 boards in a bunch of different ways, but if you're a beginner we'd recommend using our \u003cstrong\u003ebatteries included MicroPython\u003c\/strong\u003e build for ease of getting started. We've pre-loaded Plasma Stick with pirate-brand MicroPython and some fun examples to help you get started.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/plasma\" target=\"_blank\" rel=\"noopener\"\u003ePlasma MicroPython firmware and examples\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/pimoroni-pico\/tree\/main\/examples\/plasma_stick\" target=\"_blank\"\u003eC++ examples\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAlternatively, you could install \u003cstrong\u003eCircuitPython\u003c\/strong\u003e on your Pico W! CircuitPython is an easy to use, well-established ecosystem with lots of example code and drivers for interfacing with different kinds of hardware - and it's just got Pico W wireless support, woop!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/circuitpython.org\/board\/pimoroni_plasma2040w\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003eDownload CircuitPython for Plasma Stick 2040 W\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/welcome-to-circuitpython\" target=\"_blank\"\u003eWelcome to CircuitPython\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/pico-circuitpython-examples\/tree\/main\/plasma_stick\" target=\"_blank\"\u003eCircuitPython examples\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/pico-w-wifi-with-circuitpython\" target=\"_blank\"\u003eQuick-Start the Pico W WiFi with CircuitPython\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eIf you're adapting examples from elsewhere and need to know the pins that Plasma Stick uses, it's GP15 for LED data, GP4 for I2C SDA and GP5 for I2C SCL.\u003c\/p\u003e\n\u003ch2\u003eConnecting Breakouts\u003c\/h2\u003e\n\u003cp\u003eThe Qw\/ST connector on Plasma Stick makes it super easy to connect up \u003ca href=\"\/en-eu\/collections\/qwiic\" target=\"_blank\"\u003eQwiic\u003c\/a\u003e or \u003ca href=\"\/en-eu\/collections\/stemma-qt\" target=\"_blank\"\u003eSTEMMA QT\u003c\/a\u003e breakouts. If your breakout has a QW\/ST connector on board, you can plug it straight in with a \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible\" target=\"_blank\"\u003eJST-SH to JST-SH cable\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003eBreakout Garden breakouts that don't have a Qw\/ST connector can be connected using a \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible\" target=\"_blank\"\u003eJST-SH to JST-SH cable\u003c\/a\u003e plus a \u003ca href=\"\/en-eu\/products\/stemma-qt-qwiic-to-breakout-garden-adapter\" target=\"_blank\"\u003eQw\/ST to Breakout Garden adaptor\u003c\/a\u003e. Want to use \u0026gt;2 breakouts at the same time? Try \u003ca href=\"\/en-eu\/products\/sparkfun-qwiic-multiport\" target=\"_blank\"\u003ethis adaptor\u003c\/a\u003e!\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/github.com\/pimoroni\/pimoroni-pico\" target=\"_blank\"\u003eList of breakouts\u003c\/a\u003e currently compatible with our C++\/MicroPython build.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\u003c\/ul\u003e\n\u003ch2\u003eAbout Pico W Aboard\u003c\/h2\u003e\n\u003cp\u003eOur new Pico W Aboard products come with a built in Raspberry Pi Pico W. This means you get all the advantages of a RP2040 microcontroller - a speedy fast dual-core ARM processor, a dynamic, growing ecosystem and a choice of different programming methods to experiment with. Most excitingly though, Pico W has wireless connectivity, so your Pico\/RP2040 devices can communicate with each other, and the internet! 🌍\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-eu\/collections\/pico-w-aboard\" target=\"_blank\"\u003eView all Pico W Aboard!\u003c\/a\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Default Title","offer_id":40359072301139,"sku":"PIM653","price":10.0,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/plasma-stick-2040w-2.jpg?v=1666709554"},{"product_id":"5m-flexible-rgb-led-wire-50-rgb-leds-aka-neopixel-ws2812-sk6812","title":"5m Flexible RGB LED Wire (50 lights)","description":"\u003cp\u003eThis attractive, individually-addressable (NeoPixel compatible) RGB LED wire is perfect for making your own programmable fairy lights. 🌈\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e5 metres long with 50 individually addressable LEDs\u003c\/li\u003e\n\u003cli\u003eWS2812B\/NeoPixel-compatible\u003c\/li\u003e\n\u003cli\u003eSnazzy silver coloured wire\u003c\/li\u003e\n\u003cli\u003eSuper-flexible and thin, ideal for tight spaces\u003c\/li\u003e\n\u003cli\u003eTinned wires on one end for attaching to screw terminals\u003c\/li\u003e\n\u003cli\u003eDust\/water resistant*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAddressable LEDs let you individually set each LED in the chain to a specific RGB colour by sending signals from a microcontroller. If you're looking for an easy, plug and play LED controller check out \u003ca href=\"\/en-eu\/products\/plasma-2040\" target=\"_blank\"\u003ePlasma 2040\u003c\/a\u003e or \u003ca href=\"\/en-eu\/products\/plasma-stick-2040-w\" target=\"_blank\"\u003ePlasma Stick\u003c\/a\u003e - just connect up the tinned wires to the screw terminals, apply USB power and you're ready to start making rainbows!\u003c\/p\u003e\n\u003cp\u003eAlternatively, you could use a Raspberry Pi, Arduino, micro:bit, or other microcontroller to drive them - there are loads of different code libraries available (Python, MicroPython, CircuitPython, Arduino, and more).\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLED model: WS2812B-4040\u003c\/li\u003e\n\u003cli\u003eWire: 3P flexible wire (7×0.16mm tinned copper\/transparent PVC\/OD1.1×3.7)\u003c\/li\u003e\n\u003cli\u003eDiffuser: LEDs and solder joints set in epoxy resin\u003c\/li\u003e\n\u003cli\u003eIP67 dust\/water resistant*\u003c\/li\u003e\n\u003cli\u003eData-in end: 30cm tail ending in tinned wires\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eData-out end: sealed with a blob of glue**\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 3.7-5.3 VDD\u003c\/li\u003e\n\u003cli\u003eMaximum Output Power: 0.24W\/LED (at 5V)\u003c\/li\u003e\n\u003cli\u003eCable length: 5m (plus a 30cm tail)\u003c\/li\u003e\n\u003cli\u003eEmitted Color: RGB\u003c\/li\u003e\n\u003cli\u003eLED Quantity: 10 LEDs\/m (50 LEDs total)\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePinout\u003c\/h2\u003e\n\u003cp\u003eThe 5V \/ + \/ VCC wire on these LEDs is the one marked with dots. The DATA \/ PIXELS wire is the one in the middle, and the GROUND \/ - wire is the one on the other edge (that doesn't have dots).\u003c\/p\u003e\n\u003cp\u003eNote that the colour order of these LEDs is RGB, you may need to specify this in your code.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e* The LED wire is IP67 rated, which means it should stand up to modest outdoor use. Make sure your controller is kept inside or suitably protected from the elements!\u003c\/li\u003e\n\u003cli\u003e** There's no connector on the data-out end of this strip, but you could snip the end and solder multiple sets together if you wanted.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"50 LEDs (100mm LED spacing)","offer_id":40384556171347,"sku":"COM3214","price":10.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/products\/ledwire.jpg?v=1669656866"},{"product_id":"10m-addressable-rgb-led-star-wire","title":"RGB LED Star Wire (10m \/ 66 stars)","description":"\u003cp\u003eThese cute individually-addressable (NeoPixel compatible) RGB LED stars on flexible silvery wire are great for coding up celestial room decor ⭐🌈\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e10 metres long with 66 individually addressable frosted LED stars\u003c\/li\u003e\n\u003cli\u003eWS2812B\/NeoPixel-compatible\u003c\/li\u003e\n\u003cli\u003eSnazzy silver coloured wire\u003c\/li\u003e\n\u003cli\u003eTinned wires on one end for attaching to screw terminals\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUseful hook on the other end for attaching to things\u003c\/li\u003e\n\u003cli\u003eDust\/water resistant*\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eAddressable LEDs let you individually set each LED in the chain to a specific RGB colour by sending signals from a microcontroller. If you're looking for an easy, plug and play LED controller check out \u003ca href=\"\/en-eu\/products\/plasma-2040\" target=\"_blank\"\u003ePlasma 2040\u003c\/a\u003e or \u003ca href=\"\/en-eu\/products\/plasma-stick-2040-w\" target=\"_blank\"\u003ePlasma Stick\u003c\/a\u003e - just connect up the tinned wires to the screw terminals, apply USB power and you're ready to start making rainbows!\u003c\/p\u003e\n\u003cp\u003eAlternatively, you could use a Raspberry Pi, Arduino, micro:bit, or other microcontroller to drive them - there are loads of different code libraries available (Python, MicroPython, CircuitPython, Arduino, and more).\u003c\/p\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLED model: WS2812B-4040\u003c\/li\u003e\n\u003cli\u003eWire: 3P flexible wire (7×0.16mm tinned copper\/transparent PVC\/OD1.1×3.7)\u003c\/li\u003e\n\u003cli\u003eDiffuser: LEDs and solder joints set in epoxy resin\u003c\/li\u003e\n\u003cli\u003eIP67 dust\/water resistant*\u003c\/li\u003e\n\u003cli\u003eData-in end: 30cm tail ending in tinned wires\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eData-out end: plastic hook\u003c\/li\u003e\n\u003cli\u003eInput Voltage: 3.7-5.3 VDD\u003c\/li\u003e\n\u003cli\u003eMaximum Output Power: 0.24W\/LED (at 5V)\u003c\/li\u003e\n\u003cli\u003eCable length: 10m (plus a 30cm tail)\u003c\/li\u003e\n\u003cli\u003eEmitted Color: RGB\u003c\/li\u003e\n\u003cli\u003eLED Quantity: 66 LEDs total\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePinout\u003c\/h2\u003e\n\u003cp\u003eThe 5V \/ + \/ VCC wire on these LEDs is the one marked with dots. The DATA \/ PIXELS wire is the one in the middle, and the GROUND \/ - wire is the one on the other edge (that doesn't have dots).\u003c\/p\u003e\n\u003cp\u003eThe colour order of these LEDs may vary from batch to batch - if the colours aren't displaying as expected you may need to specify a different colour order in your code.\u003c\/p\u003e\n\u003ch2\u003eNotes\u003cbr\u003e\n\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e* The LED wire is IP67 rated, which means it should stand up to modest outdoor use. Make sure your controller is kept inside or suitably protected from the elements!\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Generic","offers":[{"title":"Default Title","offer_id":41375620530259,"sku":"COM3217","price":15.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/led-star-wire-3.jpg?v=1709310692"},{"product_id":"plasma-2350","title":"Plasma 2350","description":"\u003cp\u003eAn all-in-one, USB-C powered controller for WS2812\/Neopixel and APA102\/Dotstar addressable LED strips.\u003c\/p\u003e\n\u003cp\u003ePlasma 2350 is \u003cstrong\u003epowered and programmable by USB-C\u003c\/strong\u003e and, because USB-C is capable of drawing up to 3A of power, that's enough to power a healthy chunk of LEDs. There's a \u003cstrong\u003euseful button\u003c\/strong\u003e that you could use to switch between effects, plus a reset button and an \u003cstrong\u003eonboard RGB LED\u003c\/strong\u003e. We've also popped a \u003cstrong\u003eQW\/ST connector\u003c\/strong\u003e on there, to make it super easy to plug in \u003ca rel=\"noopener\" href=\"\/en-eu\/collections\/qw-st\" target=\"_blank\"\u003eQwiic or STEMMA QT\u003c\/a\u003e breakouts.\u003cbr\u003e\u003cbr\u003eYou can buy a Plasma 2350 on its own, or in a kit with a USB-C cable and some super-cool LED stars, so you can get started lighting stuff up right away.\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePowered by RP2350A \u003cspan\u003e(Dual Arm Cortex M33 running at up to 150MHz with 520KB of SRAM)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4MB of QSPI flash supporting XiP\u003c\/li\u003e\n\u003cli\u003eCompatible with 5V WS2812\/Neopixel\/SK6812 and APA102\/Dotstar\/SK9822 LEDs\u003c\/li\u003e\n\u003cli\u003eScrew terminals for attaching your LED strip.\u003c\/li\u003e\n\u003cli\u003eUSB-C connector for power and programming (3A max)\u003c\/li\u003e\n\u003cli\u003eQw\/ST (Qwiic\/STEMMA QT) connector\u003c\/li\u003e\n\u003cli\u003eIntriguing new SP\/CE connector\u003c\/li\u003e\n\u003cli\u003eReset, BOOT and a user button (the BOOT button can also be used as a user button)\u003c\/li\u003e\n\u003cli\u003eRGB LED\u003c\/li\u003e\n\u003cli\u003eFully-assembled (no soldering required)\u003c\/li\u003e\n\u003cli\u003eMeasurements: approx 61 x 22 x 12mm (L x W x H, including connectors)\u003c\/li\u003e\n\u003cli\u003eProgrammable with C\/C++ or MicroPython\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cb\u003eSTARter Kit contains\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePlasma 2350\u003c\/li\u003e\n\u003cli\u003eUSB-C cable for power and programming\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/10m-addressable-rgb-led-star-wire\" rel=\"noopener\" target=\"_blank\"\u003e10m RGB LED Star Wire\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePinout and Schematic\u003c\/h2\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/plasma2350_pinout_diagram.png?v=1723124466\" alt=\"\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/plasma2350_pinout_diagram.pdf?v=1723124465\" target=\"_blank\"\u003eDownload a printable PDF version\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Pimoroni_Plasma_2350_Schematic.pdf?v=1724926880\" target=\"_blank\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/plasma-2350-mechanical-diagram.pdf?v=1725452657\" rel=\"noopener\" target=\"_blank\"\u003eMechanical diagram\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/plasma\" rel=\"noopener\" target=\"_blank\"\u003ePlasma MicroPython firmware and examples\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/circuitpython.org\/board\/pimoroni_plasma2350\/\" rel=\"noopener\" target=\"_blank\"\u003eDownload CircuitPython for Plasma 2350\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConnecting Breakouts\u003c\/h2\u003e\n\u003cp\u003eIf your breakout has a QW\/ST connector on board, you can plug it straight in with a \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible?variant=31910609813587\" target=\"_blank\"\u003eJST-SH to JST-SH cable\u003c\/a\u003e, or you can easily connect any of our I2C breakouts with a \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible?variant=31910609813587\" target=\"_blank\"\u003eJST-SH to JST-SH cable\u003c\/a\u003e coupled with a \u003ca href=\"\/en-eu\/products\/stemma-qt-qwiic-to-breakout-garden-adapter\" target=\"_blank\"\u003eQw\/ST to Breakout Garden adaptor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/pimoroni-pico#breakouts\" target=\"_blank\"\u003eBreakouts currently compatible with our C++\/MicroPython build\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe've also broken out the I2C, analog, UART and debug pins so you can solder things like breakouts or analog potentiometers directly to them (or solder on a strip of header and plug the whole shebang into a breadboard).\u003c\/p\u003e\n\u003ch2\u003eAbout RP2350\u003c\/h2\u003e\n\u003cp\u003eThe RP2350 chip is the Double Quarter Pounder \u0026amp; Fries to the RP2040's Double Cheeseburger and can have one or more RISC-V burgers instead of either of the M33 ARMs, to stretch the metaphor.\u003c\/p\u003e\n\u003cp\u003eIn addition to the modern M33 ARM cores, there are sides of: more PIO capability, a variety of low power states for sipping electrons, a whole security system and some sprinklings of specialist digital video circuits to offload DVI\/HDMI output.\u003c\/p\u003e\n\u003cp\u003eYou can expect a tasty boost in performance - our \"real world\" MicroPython tests are running up to 2x faster compared to RP2040, and floating point number crunching in C\/C++ is up to 20x faster. The extra on-chip RAM will make a big difference when performing memory intensive operations (such as working with higher resolution displays) and even more can be added thanks to external PSRAM support.\u003c\/p\u003e\n\u003cp\u003eRP2350 comes in two flavours - A (standard) and B (all the pins). The B chip has a stonking 48 usable GPIO pins, including 8 ADCs and 24 PWMs, and features on some of our new products. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-eu\/collections\/rp2350\" target=\"_blank\"\u003eClick here to view all things RP2350!\u003c\/a\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Board Only","offer_id":42092628246611,"sku":"PIM723","price":10.0,"currency_code":"GBP","in_stock":true},{"title":"STARter Kit","offer_id":42092628279379,"sku":"PIM743","price":27.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/plasma-2350-oak-1.jpg?v=1723049768"},{"product_id":"adafruit-soft-flexible-wire-neopixel-strand-50-neopixels","title":"Adafruit Soft Flexible Wire NeoPixel Strand - 50 NeoPixels","description":"\u003cp\u003eWe have all sorts of LED strips for a wide range of needs. And here's a new variation, a veritable bundle of\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eSolid Core Wire Mini NeoPixels\u003c\/strong\u003e! \u003c\/p\u003e\n\u003cp\u003eAttaching NeoPixel strips to your costume can be a struggle as the flexible PCBs can crack when bent too much. So how to add little dots of color? Use this NeoPixel that uses solid cords of plated wire that hold their shape! They're very small, so they're easy to embed into any structure, costume, or wearable. The wires can be sewn over, or embedded in a casting.\u003c\/p\u003e\n\u003cp\u003eThe strip is made of solid core wires with a coated NeoPixel every ~100mm (~4 inches) with a total of 50 LEDs. \u003cstrong\u003eIt does not come with weatherproof sheathing so you cannot wash these or dunk them underwater\u003c\/strong\u003e. You can cut the strand pretty easily with wire cutters. Note that while the wires are coated so they don't short against each other, that coating will wear off over time especially when flexed, so avoid abrasion or repeated flexing of the connector cables.\u003c\/p\u003e\n\u003cp\u003eConnecting to these is a little tricky because there's no power\/data markings (there's no PCB!) So instead, look at the dot at the end of the strand. The wire closet to the green dot is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eground\u003c\/strong\u003e. The wire on the opposite side is\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003epower\u003c\/strong\u003e. The center line is data in. There's two ways to determine the input pixel. One is the green dot is actually a 'pointy' dot and the point shows the direction of the data. The other way is to hold the first pixel so the dot is closest to you, the input is then on the right side.\u003c\/p\u003e\n\u003cp\u003eThe strands come with connectors pre-attached but you can carefully solder to the solid wires as well.\u003cspan\u003e \u003c\/span\u003e\u003ca rel=\"noopener\" data-saferedirecturl=\"https:\/\/www.google.com\/url?hl=en\u0026amp;q=https:\/\/www.adafruit.com\/product\/2880\u0026amp;source=gmail\u0026amp;ust=1512247253529000\u0026amp;usg=AFQjCNHrlbuOMjGkQ1EBZto-YzST9Ek_DQ\" href=\"\/en-eu\/products\/led-strip-input-output-cable-3-pin\" target=\"_blank\" data-mce-href=\"\/en-eu\/products\/led-strip-input-output-cable-3-pin\"\u003eYou can pick up 3-pin JST set\u003c\/a\u003e to turn it into a quick connection. Of course, you can also connect strands together to make them longer, just watch how much current you need! \u003ca href=\"https:\/\/www.adafruit.com\/products\/1466\" data-mce-href=\"https:\/\/www.adafruit.com\/products\/1466\"\u003eAdafruit have a 5V\/4A supply that should be able to drive 1 meter\u003c\/a\u003e and \u003ca href=\"http:\/\/www.adafruit.com\/products\/658\" data-mce-href=\"http:\/\/www.adafruit.com\/products\/658\"\u003ea 5V\/10A supply that can drive up to 10 meters\u003c\/a\u003e (depending on use) \u003cstrong\u003eYou must use a 5V DC power supply to power these strips, do not use higher than 6V or you can destroy the entire strip.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-neopixel-uberguide\" data-mce-href=\"https:\/\/learn.adafruit.com\/adafruit-neopixel-uberguide\"\u003e\u003cstrong\u003eAdafruit have a tutorial showing NeoPixel wiring, power usage calculations, example code for usage, etc. Please check it out!\u003c\/strong\u003e\u003c\/a\u003e\u003c\/p\u003e\n\u003ch2 id=\"tab-technical-details-heading\"\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRevision History:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of June 20th, 2024 –\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eThe design of the LED Strip has been updated now with fully encased wires and silicon covered neopixels.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2011 65 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\"\u003e\u003c\/div\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2015 863 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv class=\"product-info-added-tutorial-title\"\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/hanukkah-menorah-sweater\"\u003eHanukkah MakeCode Menorah Sweater\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-info-tutorials-tagline\"\u003eKeep warm and keep those candles burning\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cdiv class=\"product-info-added-tutorial-title\"\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/epcot-spaceship-earth-with-wled\"\u003eEPCOT Spaceship Earth with WLED\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv class=\"product-info-tutorials-tagline\"\u003e3D print your own Spaceship Earth!\u003c\/div\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":54541202456955,"sku":"ADA4560","price":16.63,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/4560-07.jpg?v=1732039854"},{"product_id":"plasma-2350-w","title":"Plasma 2350 W","description":"\u003cp\u003eAn all-in-one, USB-C powered controller for WS2812\/Neopixel and APA102\/Dotstar addressable LED strips. Now with added wireless connectivity!\u003c\/p\u003e\n\u003cp\u003ePlasma 2350 W is \u003cstrong\u003epowered and programmable by USB-C\u003c\/strong\u003e and, because USB-C is capable of drawing up to 3A of power, that's enough to power a healthy chunk of LEDs. There's a \u003cstrong\u003euseful button\u003c\/strong\u003e that you could use to switch between effects, plus a reset button and an \u003cstrong\u003eonboard RGB LED\u003c\/strong\u003e. We've also popped a \u003cstrong\u003eQW\/ST connector\u003c\/strong\u003e on there, to make it super easy to plug in \u003ca href=\"\/en-eu\/collections\/qwiic\" target=\"_blank\"\u003eQwiic\u003c\/a\u003e or \u003ca href=\"\/en-eu\/collections\/stemma-qt\" target=\"_blank\"\u003eSTEMMA QT\u003c\/a\u003e breakouts.\u003c\/p\u003e\n\u003cp\u003eThe 'W' version comes equipped with a Raspberry Pi RM2 module, which gives it \u003cstrong\u003e2.4 GHz\u003c\/strong\u003e \u003cstrong\u003ewireless and Bluetooth connectivity\u003c\/strong\u003e. Use it to control Plasma 2350 W remotely, hook it up to online APIs or integrate it with your home automation.\u003c\/p\u003e\n\u003cp\u003eYou can buy a Plasma 2350 W on its own, or in a kit with a USB-C cable and some super-cool LED stars, so you can get started lighting stuff up right away.\u003c\/p\u003e\n\u003cp style=\"padding: 0.5em; border: 2px solid green;\"\u003eCurrent stock of \u003cstrong\u003ePlasma 2350 W (board only)\u003c\/strong\u003e uses the latest A4 stepping of RP2350 🎉\u003c\/p\u003e\n\u003cp style=\"padding: 0.5em; border: 2px solid orange;\"\u003eCurrent stock of the \u003cstrong\u003eSTARter kit\u003c\/strong\u003e is still A2, which is affected by the \u003ca href=\"https:\/\/datasheets.raspberrypi.com\/rp2350\/rp2350-datasheet.pdf#page=1342\" target=\"_blank\"\u003eRP2350-E9 erratum\u003c\/a\u003e. If your project involves pulling inputs low, you may need to add external pull-down resistors (8.2 kΩ or smaller).\u003c\/p\u003e\n\u003ch2\u003eFeatures\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePowered by RP2350A \u003cspan\u003e(Dual Arm Cortex M33 running at up to 150MHz with 520KB of SRAM)\u003c\/span\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4MB of QSPI flash supporting XiP\u003c\/li\u003e\n\u003cli\u003eCompatible with 5V WS2812\/Neopixel\/SK6812 and APA102\/Dotstar\/SK9822 LEDs\u003c\/li\u003e\n\u003cli\u003eScrew terminals for attaching your LED strip.\u003c\/li\u003e\n\u003cli\u003eUSB-C connector for power and programming (3A max)\u003c\/li\u003e\n\u003cli\u003eRaspberry Pi RM2 module (\u003ca href=\"https:\/\/www.infineon.com\/cms\/en\/product\/wireless-connectivity\/airoc-wi-fi-plus-bluetooth-combos\/wi-fi-4-802.11n\/cyw43439\/\" target=\"_blank\"\u003eCYW43439\u003c\/a\u003e), supporting IEEE 802.11 b\/g\/n wireless LAN, and Bluetooth\u003c\/li\u003e\n\u003cli\u003eQw\/ST (Qwiic\/STEMMA QT) connector\u003c\/li\u003e\n\u003cli\u003eReset, BOOT and a user button (the BOOT button can also be used as a user button)\u003c\/li\u003e\n\u003cli\u003eRGB LED\u003c\/li\u003e\n\u003cli\u003eFully-assembled (no soldering required)\u003c\/li\u003e\n\u003cli\u003eMeasurements: approx 61 x 22 x 12mm (L x W x H, including connectors)\u003c\/li\u003e\n\u003cli\u003eProgrammable with C\/C++ or MicroPython\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003e\u003cb\u003eSTARter Kit contains\u003c\/b\u003e\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003ePlasma 2350 W\u003c\/li\u003e\n\u003cli\u003eUSB-C cable for power and programming\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"\/en-eu\/products\/10m-addressable-rgb-led-star-wire\" rel=\"noopener\" target=\"_blank\"\u003e10m RGB LED Star Wire\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003ePinout and Schematic\u003c\/h2\u003e\n\u003cp\u003e\u003cimg alt=\"\" src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/plasma2350_w_pinout_diagram.png?v=1732206534\"\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/plasma2350_pinout_diagram.pdf?v=1723124465\" target=\"_blank\"\u003eDownload a printable PDF version\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Pimoroni_Plasma_2350_W_Schematic.pdf?v=1732206580\" target=\"_blank\"\u003eSchematic\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eGetting Started\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/github.com\/pimoroni\/plasma\" target=\"_blank\"\u003ePlasma MicroPython firmware and examples\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eConnecting Breakouts\u003c\/h2\u003e\n\u003cp\u003eIf your breakout has a QW\/ST connector on board, you can plug it straight in with a \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible?variant=31910609813587\" target=\"_blank\"\u003eJST-SH to JST-SH cable\u003c\/a\u003e, or you can easily connect any of our I2C breakouts with a \u003ca href=\"\/en-eu\/products\/jst-sh-cable-qwiic-stemma-qt-compatible?variant=31910609813587\" target=\"_blank\"\u003eJST-SH to JST-SH cable\u003c\/a\u003e coupled with a \u003ca href=\"\/en-eu\/products\/stemma-qt-qwiic-to-breakout-garden-adapter\" target=\"_blank\"\u003eQw\/ST to Breakout Garden adaptor\u003c\/a\u003e.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/github.com\/pimoroni\/pimoroni-pico#breakouts\" target=\"_blank\"\u003eBreakouts currently compatible with our C++\/MicroPython build\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWe've also broken out the I2C, analog, UART and debug pins so you can solder things like breakouts or analog potentiometers directly to them (or solder on a strip of header and plug the whole shebang into a breadboard).\u003c\/p\u003e\n\u003ch2\u003eAbout RP2350\u003c\/h2\u003e\n\u003cp\u003eThe RP2350 chip is the Double Quarter Pounder \u0026amp; Fries to the RP2040's Double Cheeseburger and can have one or more RISC-V burgers instead of either of the M33 ARMs, to stretch the metaphor.\u003c\/p\u003e\n\u003cp\u003eIn addition to the modern M33 ARM cores, there are sides of: more PIO capability, a variety of low power states for sipping electrons, a whole security system and some sprinklings of specialist digital video circuits to offload DVI\/HDMI output.\u003c\/p\u003e\n\u003cp\u003eYou can expect a tasty boost in performance - our \"real world\" MicroPython tests are running up to 2x faster compared to RP2040, and floating point number crunching in C\/C++ is up to 20x faster. The extra on-chip RAM will make a big difference when performing memory intensive operations (such as working with higher resolution displays) and even more can be added thanks to external PSRAM support.\u003c\/p\u003e\n\u003cp\u003eRP2350 comes in two flavours - A (standard) and B (all the pins). The B chip has a stonking 48 usable GPIO pins, including 8 ADCs and 24 PWMs, and features on some of our new products. \u003c\/p\u003e\n\u003cp\u003e\u003ca href=\"\/en-eu\/collections\/rp2350\" target=\"_blank\"\u003eClick here to view all things RP2350!\u003c\/a\u003e\u003c\/p\u003e","brand":"Pimoroni","offers":[{"title":"Board Only","offer_id":54829890601339,"sku":"PIM729","price":13.75,"currency_code":"GBP","in_stock":true},{"title":"STARter Kit","offer_id":54829890634107,"sku":"PIM758","price":31.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/Plasma-2350-W-1.jpg?v=1732275676"},{"product_id":"adafruit-sparkle-motion","title":"Adafruit Sparkle Motion - All-In-One WLED and xLights Board","description":"\u003cp\u003e\u003cstrong\u003eSparkle Motion \u003c\/strong\u003eis the flagship in Adafruit's series of \"Sparkle Motion\" boards, their attempt to make the best WLED-friendly smart LED driving board in the whole world.\u003c\/p\u003e\n\u003cp\u003eAdafruit's resident mermaid, \u003ca href=\"https:\/\/learn.adafruit.com\/u\/firepixie\"\u003efirepixie\u003c\/a\u003e makes a lot of projects with WLED and she loves it! So how to make something that will be powerful enough to drive advanced LED projects with built-in sensors.\u003c\/p\u003e\n\u003cp\u003eThis version has a built-in antenna so it's ready to go out-of-the-box.\u003c\/p\u003e\n\u003cp\u003eThis board has everything you could possibly want for big, small, or even massive WLED\/xLights projects:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower option 1 via USB Type C PD\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith a slide switch that selects between 5, 12 and 20V (24V pixels can usually run fine at 20V)\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003ePower option 2 via 2.1mm DC jack, center positive\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLow forward-voltage diodes\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eso its good for up to 5A from either\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5 Amp fuse\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eto protect from over-current drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32\u003c\/strong\u003e mini module with built in antenna port - the classic ESP32 has the best WLED support even if we'd prefer the 'S2 or 'S3. Comes with 4 MB of flash, dual core 240MHz Tensilica, WiFi, Bluetooth® LE and Bluetooth® Classic support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-serial converter \u003c\/strong\u003ewith auto-reset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThree output signal terminal block sets with power and ground for each\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- they'll be level shifted to 5V. Use 26-20AWG stranded or solid core wires, 5A rated.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e6 GPIO breakout pads\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith a fourth level-shifted output, and 3 more GPIO plus power and ground.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in I2S microphone \u003c\/strong\u003efor audio-reactive projects with digital quality audio\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in IR receiver \u003c\/strong\u003efor easy remote control integration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStemma QT I2C port\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto connect external sensors\/OLED\/etc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate analog\/digital input JST port\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003efor analog input, potentiometer, microphone or external IR receiver\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser button on GPIO 0\u003c\/strong\u003e plus Reset button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed built-in LED\u003c\/strong\u003e on pin 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall built-in NeoPixel\u003c\/strong\u003e on pin 2\u003c\/li\u003e\n\u003cli\u003eCompact enough you can use it for wearable projects - 1.3\"x1.75\" \/ 33mm x 45mm size with mounting holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eTo make it super fast to get started, terminal blocks are pre-installed: use any 20-26 AWG stranded or solid core wires with a flat-head screwdriver to attach semi-permanently.\u003c\/p\u003e\n\u003cp\u003eWhile Adafruit recommend it for use with WLED, it will also work just fine as a compact ESP32 board for use with Arduino, ESP-IDF, MicroPython, CircuitPython or any other ESP32 supported codebase. \u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003e\u003cstrong\u003eRevision History:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs of August 4, 2025\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- The microphone may be located on the top or bottom of the Sparkle Motion board.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2011 65 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\"\u003e \u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2015 863 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-sparkle-motion\"\u003ePrimary Guide: Adafruit Sparkle Motion\u003c\/a\u003e\u003cbr\u003eGet up and running with your Sparkle Motion Board\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/products\/6100\/guides\" target=\"_blank\"\u003eSee more guides!\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"PCB Antenna","offer_id":55969246249339,"sku":"ADA6100","price":19.25,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6100-07.jpg?v=1765372953"},{"product_id":"mini-sparkle-motion","title":"Adafruit Mini Sparkle Motion - ESP32 NeoPixel LED Driver","description":"\u003cp\u003e\u003cstrong\u003eSparkle Motion Mini\u003c\/strong\u003e is part of Adafruit's series of \"Sparkle Motion\" boards, which are their attempt to make the best small WLED-friendly smart LED driving board in the whole world.\u003c\/p\u003e\n\u003cp\u003eAdafruit's resident mermaid,\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/u\/firepixie\"\u003efirepixie\u003c\/a\u003e makes a lot of projects with WLED, and she loves it! So, how to make something powerful enough to drive advanced LED projects that need a compact design?\u003c\/p\u003e\n\u003cp\u003eThe\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMini\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eversion of the Sparkle Motion is a simpler version of the full-featured Sparkle Motion; Adafruit give up the high voltage support and built-in IR receiver, to make it under 1 square inch in size!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis version includes a pre-soldered terminal block\u003c\/strong\u003e, that means no soldering is required to get started: a small screwdriver will get you going instantly. However, the board is bulkier and the terminal block overlaps half of one of the breakout pads.\u003c\/p\u003e\n\u003cp\u003eBy using a 4-layer board and double-sided assembly, Adafruit have put together this feature set:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower via USB Type C for up to 5V 4A input - \u003c\/strong\u003eyou can use off-the-shelf USB battery packs for portable operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4 Amp resetting fuse\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eto protect from over-current drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emini module with built-in antenna port - the classic ESP32 has the best WLED support even if we'd prefer the 'S2 or 'S3. Comes with 4 MB of flash, dual core 240MHz Tensilica, WiFi, Bluetooth® LE, and Bluetooth® Classic support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-serial converter\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ewith auto-reset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo output signals plus 5V power and ground\u003c\/strong\u003e - both signal output are level shifted to 5V. These are on 0.1\" spaced breakout pads.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtra 2x3 0.1\" breakout pads\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003ewith 4 more GPIO plus 3V power and ground.\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003eBuilt-in I2S microphone\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStemma QT I2C port\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eto connect external sensors\/OLED\/etc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser button on GPIO 0\u003c\/strong\u003e plus Reset button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed built-in LED\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eon pin 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall built-in NeoPixel\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eon pin 18 \u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSeparate analog\/digital input JST port\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003efor analog input, potentiometer, microphone, or external IR receiver on pin 13\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompact enough you can use it for wearable projects\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003e- 1.2\"x0.8\" \/ 30mm x 20mm size with mounting holes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eWhile Adafruit recommend it for use with WLED, it will also work fine as a compact ESP32 board for use with Arduino, ESP-IDF, MicroPython, CircuitPython, or any other ESP32-supported codebase.\u003c\/p\u003e\n\u003cp\u003eComes as a fully assembled driver board with a 3.5mm terminal block\u003c\/p\u003e\n\u003cp\u003eAlso, unlike the bigger version, Adafruit dropped the on-board IR receiver; however, it's easy to add one by\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/pimoroni-pico-debug-cable\" rel=\"noopener\" target=\"_blank\"\u003eplugging in a JST SH 3-pin socket cable\u003c\/a\u003e\u003cspan\u003e \u003c\/span\u003eand\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"https:\/\/www.adafruit.com\/product\/157\"\u003eslotting in an IR receiver module\u003c\/a\u003e.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cp\u003eProduct Dimensions: 32.3mm x 19.7mm x 12.4mm \/ 1.3\" x 0.8\" x 0.5\"\u003c\/p\u003e\n\u003cp\u003eProduct Weight: 5.1g \/ 0.2oz\u003c\/p\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003cdiv class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/div\u003e\n\u003ch2 class=\"col-lg-2 col-md-3 col-sm-3 col-xs-4\"\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-sparkle-motion-mini\"\u003ePrimary Guide: Adafruit Sparkle Motion Mini\u003c\/a\u003e \u003cbr\u003eGet up and running with your Sparkle Motion Mini Board\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6314\/guides\" rel=\"noopener\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"With Pre-Soldered Terminal Block","offer_id":55969262141819,"sku":"ADA6314","price":15.5,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6314-00_a3cf028f-4ca2-4b04-a675-40588a871713.jpg?v=1765375215"},{"product_id":"snap-on-enclosure-for-adafruit-sparkle-motion","title":"Snap-on Enclosure for Adafruit Sparkle Motion","description":"\u003cp\u003eA cute and minimal enclosure for your\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eAdafruit Sparkle Motion\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eboard to keep it safe during use and transport.\u003c\/p\u003e\n\u003cp\u003eThis case has been custom-designed and 3D printed to accommodate all the peripheries. No screws or glue are required; simply snap the board into the bottom piece and assemble the top piece.\u003c\/p\u003e\n\u003cp\u003eEar-mounts allow for quick attachment to any surface.\u003c\/p\u003e\n\u003cp\u003eIt's made of translucent milky white plastic with an SLA process, so there are no lines or blobbiness to the print.\u003c\/p\u003e\n\u003cp\u003eNo boards, cables, or accessories are included. Designed for the\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"\/en-eu\/products\/adafruit-sparkle-motion\" target=\"_blank\" rel=\"noopener\"\u003eAdafruit Sparkle Motion - All-In-One WLED and xLights Board\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e.\u003c\/span\u003e It does \u003cstrong\u003enot\u003c\/strong\u003e fit the smaller Sparkle Motion Mini board.\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6301\/Sparkle+Motion+Case+3D+files.zip\"\u003e3D Case Files\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\" alt=\"RoHS 2 2011 65 EU Compliant\" width=\"145\" height=\"80\"\u003e \u003cimg src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\" alt=\"RoHS 2 2015 863 EU Compliant\" width=\"145\" height=\"80\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003ca href=\"https:\/\/learn.adafruit.com\/butterfly-bench-with-edge-lit-acrylic\"\u003eButterfly Bench with Edge Lit Acrylic\u003c\/a\u003e Transform your backyard or festival camp\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/products\/6301\/guides\" rel=\"noopener\" target=\"_blank\"\u003eSee all guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":55969319158139,"sku":"ADA6301","price":4.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6301-03.jpg?v=1765376897"},{"product_id":"snap-on-enclosure-for-adafruit-mini-sparkle-motion","title":"Snap-on Enclosure for Adafruit Mini Sparkle Motion","description":"\u003cp\u003eA cute and minimal enclosure for your\u003cspan\u003e \u003c\/span\u003e\u003cstrong\u003eMini Sparkle Motion\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eboard to keep it safe during use and transport.\u003c\/p\u003e\n\u003cp\u003eThis case has been custom-designed and 3D printed to accommodate all the peripheries. No screws or glue are required; simply snap the board into the bottom piece and assemble the top piece.\u003c\/p\u003e\n\u003cp\u003eEar-mounts allow for quick attachment to any surface.\u003c\/p\u003e\n\u003cp\u003eIt's made of translucent milky white plastic with an SLA process, so there are no lines or blobbiness to the print.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNo boards, cables, or accessories are included. Designed for the \u003c\/span\u003e\u003cstrong\u003e\u003ca href=\"\/en-eu\/products\/mini-sparkle-motion\" rel=\"noopener\" target=\"_blank\"\u003eMini Sparkle Motion - WLED-friendly ESP32 NeoPixel LED Driver\u003c\/a\u003e\u003c\/strong\u003e\u003cspan\u003e only*. It does \u003c\/span\u003e\u003cstrong\u003enot\u003c\/strong\u003e\u003cspan\u003e fit the larger Sparkle Motion boards.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6299\/Mini+Sparkle+Motion+Case+files.zip\"\u003e3D Case Files\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2011 65 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\"\u003e \u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2015 863 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\"\u003e\u003c\/p\u003e\n\u003ch2\u003eNotes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e* Note that \u003cstrong\u003ethe lid of this enclosure won't fit if you have a terminal block attached\u003c\/strong\u003e to your Mini Sparkle Motion board, though it is possible to \u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/IMG_1016.png?v=1766057099\" rel=\"noopener\" target=\"_blank\"\u003ecut a hole\u003c\/a\u003e for the terminal block using a Dremel or similar.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":55969345503611,"sku":"ADA6299","price":3.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6299-03.jpg?v=1765377772"},{"product_id":"snap-on-enclosure-for-adafruit-tps61169-breakout","title":"Snap-on Enclosure for Adafruit TPS61169 Breakout","description":"\u003cp\u003eA cute and minimal enclosure for your\u003cspan\u003e  Adafruit TPS61169 Constant Current Boost Converter for LEDs \u003c\/span\u003eto keep it safe during use and transport.\u003c\/p\u003e\n\u003cp\u003eThis case has been custom-designed and 3D printed to accommodate all the peripheries. No screws or glue are required; simply snap the board into the bottom piece and assemble the top piece.\u003c\/p\u003e\n\u003cp\u003eEar-mounts allow for quick attachment to any surface.\u003c\/p\u003e\n\u003cp\u003eIt's made of translucent milky white plastic with an SLA process, so there are no lines or blobbiness to the print.\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eNo boards, cables, or accessories are included. Designed for the \u003ca rel=\"noopener\" href=\"\/en-eu\/products\/adafruit-tps61169-constant-current-boost-converter-for-leds\" target=\"_blank\"\u003eAdafruit TPS61169 Constant Current Boost Converter for LEDs\u003c\/a\u003e only.\u003c\/span\u003e\u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul id=\"product-files\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6402\/TPS61169+Enclosure+Files.zip\"\u003e3D Case Files.zip\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2011 65 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\"\u003e \u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2015 863 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\"\u003e\u003c\/p\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":55969516355963,"sku":"ADA6402","price":2.0,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6402-02.jpg?v=1765383674"},{"product_id":"adafruit-sparkle-motion-stick-enclosure-kit","title":"Adafruit Sparkle Motion Stick + Enclosure Kit","description":"\u003cp\u003eThe \u003cstrong\u003eSparkle Motion Stick\u003c\/strong\u003e is part of Adafruit's series of \"Sparkle Motion\" boards, which are their attempt to make the best small WLED-friendly smart LED driving board in the whole world.\u003c\/p\u003e\n\u003cp\u003eAdafruit's resident mermaid, \u003ca href=\"https:\/\/learn.adafruit.com\/u\/firepixie\"\u003efirepixie\u003c\/a\u003e makes a lot of projects with WLED, and she loves it! So, how to make something powerful enough to drive advanced LED projects that need a compact design?\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eThis version includes both the Sparkle Motion Stick and the enclosure\u003c\/strong\u003e, which is great if you want to protect your USB dongle from everyday usage, but note that it is not waterproof or weatherproof. There are three pieces: two snap over the PCB to capture it in place, and one can be used as a USB A port cap. There's also a button lever - by default in WLED pin 0 is an on\/off mode switcher, but you can program it to do other stuff.\u003c\/p\u003e\n\u003cp\u003eThe USB Stick version of the Sparkle Motion is a simpler version of the full-featured Sparkle Motion.\u003cspan\u003e \u003c\/span\u003eIt even fits into a low cost off-the-shelf case for protection.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower via USB Type A for up to 5V 2A input - \u003c\/strong\u003eyou can use off-the-shelf USB battery packs for portable operation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2 Amp resetting fuse\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eto protect from over-current drive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESP32\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003emini module with built-in antenna port - the classic ESP32 has the best WLED support, even if we'd prefer the 'S2 or 'S3. Comes with 4 MB of flash, dual-core 240MHz Tensilica, WiFi, Bluetooth® LE, and Bluetooth® Classic support.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-serial converter\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003ewith auto-reset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTwo output signals plus 5V power and ground\u003c\/strong\u003e - both signal outputs are level shifted to 5V.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in I2S microphone \u003c\/strong\u003efor audio-reactive projects\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBuilt-in Infrared receiver\u003cspan\u003e \u003c\/span\u003e\u003c\/strong\u003eon GPIO 10 for easy remote control integration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUser button on GPIO 0\u003c\/strong\u003e which you can press even when its in the snap-on case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRed built-in LED\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eon pin 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall built-in NeoPixel\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003eon pin 18\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScrew terminal blocks\u003c\/strong\u003e\u003cspan\u003e \u003c\/span\u003efor no-solder connectivity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eCompared to the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/adafruit-sparkle-motion\" target=\"_blank\"\u003elarger Sparkle Motion board\u003c\/a\u003e, this only supports 5V and doesn't have a reset button, there are fewer outputs, and no breakout pads of I2C\/GPIO connections for external accessories.\u003cbr\u003e\u003cbr\u003eCompared to the\u003cspan\u003e \u003c\/span\u003e\u003ca href=\"\/en-eu\/products\/mini-sparkle-motion\" target=\"_blank\"\u003eSparkle Motion Mini\u003c\/a\u003e, this has a USB A port so it's 2A max power. It does have IR and built-in terminal blocks but does not have GPIO breakout pads.\u003c\/p\u003e\n\u003cp\u003eWhile we recommend it for use with WLED, it will also work just fine as a compact ESP32 board for use with Arduino, ESP-IDF, MicroPython, CircuitPython, or any other ESP32-supported codebase. \u003c\/p\u003e\n\u003ch2\u003eTechnical Details\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn-shop.adafruit.com\/product-files\/6333\/C21622-001_datasheet.pdf\"\u003eEnclosure Diagram\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2011 65 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2011_65_EU.svg\"\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cimg height=\"80\" width=\"145\" alt=\"RoHS 2 2015 863 EU Compliant\" src=\"https:\/\/www.adafruit.com\/includes\/templates\/shop2019\/images\/RoHS2_2015_863_EU.svg\"\u003e\u003c\/p\u003e\n\u003ch2\u003eLearn\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cdiv\u003e\u003ca href=\"https:\/\/learn.adafruit.com\/adafruit-sparkle-motion-stick\"\u003ePrimary Guide: Adafruit Sparkle Motion Stick\u003c\/a\u003e\u003c\/div\u003e\n\u003cdiv\u003eThe power of Sparkle Motion in a stick\u003c\/div\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003ca rel=\"noopener\" href=\"https:\/\/learn.adafruit.com\/products\/6333\/guides\" target=\"_blank\"\u003eSee All Guides\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Adafruit","offers":[{"title":"Default Title","offer_id":56075351359867,"sku":"ADA6333","price":15.5,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0174\/1800\/files\/6333-04.png?v=1770740861"}],"url":"https:\/\/shop.pimoroni.com\/en-eu\/collections\/flexible-rgb-led-strips.oembed","provider":"Pimoroni Ltd","version":"1.0","type":"link"}